Transcript
Light control / Power packs
DIM-6x16
++6-channel dimmer ++Each channel is protected by
Power block
6 x 16 A Power control unit with built-in, DMX or manually controllable dimmer ref 9058
a bipolar circuit-breaker
++DMX Input/output via a XLR connector, power output via the terminal
Technical specifications ON/OFF LEDs assigned to each plug 0-50% adjustable pre-heating via the potentiometer DMX adressing dip switch 6 linear potentiometers allowing a manual gradation Power indicator LEDs for each channel Power supply : single-phase or three-phase power supply via internal terminal block (230 V - 50 Hz)
Power output : 16 A (3 500 W) per channel; 96 A max. resistive/inductive Rear outputs DMX input/output via 3-pin XLR plug Each channel is protected by a bipolar circuit-breaker Dimensions : 482 x 390 x 90 mm / 19’’ rack mountable Weight : 7 kg
143
DP8 Power control unit
The switchboard is a vital tool for any installation ref 9407
++Power output via French sockets at the rear
++Each switch has its own indicator light showing if the channel is busy or not, ON or OFF
++Each channel has its own fuse protection
Technical specifications 8-way line splitter with bipolar switches Power outputs: 8 french plugs A light indicator shows you when a channel is powered up 15 A fuse (the max current cannot exceed 15 A)
19’’ mounting rack Power supply : 230 V - 50 Hz Power supply cable length : 1.30 m Dimensions : 483 x 87 x 83 mm
