Transcript
Pendant Mount Cap Installation Guide CE-ACW (White) & CE-ACB (Black)
¾” Conduit Pipe
Conduit Screw Connector Included Items: • Pendant Cap x 1 • Mounting Screws x 3 • Conduit Screw Connector x 1 • Instructions x 1
Pendant Cap
Required Items: • ¾”Conduit Pipe x 1 • Philips Head Screwdriver x 1 • Clinton Dome Camera x 1 Installing the Pendant Mount Cap 1. Install the Camera Mounting Plate. Use the 3 supplied screws to install the camera mounting plate to the pendant cap as shown below.
Camera Mounting Plate
Mounting Screws
2. Install Pendant Mount onto location. Screw the pendant mount cap onto a suitable conduit pipe that has ¾” NPT threads or use the included conduit screw connector and tighten the top screw to secure the pendant cap to the conduit pipe.
Camera
3. Connect the Cables Feed the power and video cables through the pendant mount cap and connect the power and video cables. 4. Secure the Camera to Pendant Cap Secure the camera to the pendant cap by matching up the three mounting posts on the camera mounting plate to the base of the camera and turn the camera clockwise to lock into place. 5. Adjust Camera Position and Test Remove the dome cover and adjust the camera to the desired position and test. See camera instruction manual for detailed camera adjustment and settings.
Dome Cover
6. Replace the Dome Cover. Replace the dome cover by slightly turning the dome clockwise until it locks into place. CLINTON Electronics 6701 Clinton Road Loves Park, IL 61111
1.800.447.3306 Sales 1.800.549.6396 Support 1.800.633.8712 Fax
www.clintonelectronics.com v.04.08.09
