Transcript
Firefall Wind Guard Model: 8206-WG This wind guard is for use with your American Fyre Designs firefall. It enhances your unit aesthetically and improves flame appearance. CAUTION: DO NOT touch any part of this accessory during operation and when HOT! The glass panels and other surfaces get HOT and can cause burns if touched. Be sure the firefall and this accessory is completely cool when handling. To install, allow the unit to cool completely, then place the accessory onto the hearth of the unit, being sure that it is centered over the burner trough. See Fig. 1-1. Clean the glass periodically to remove any build-ups caused by the elements and combustion. It is recommended that the glass be cleaned 2-3 times during each heating season, depending on use and environment conditions.
Fig. 1-1
Clean using a non-abrasive glass cleaner and a clean lint-free cloth. ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746 REV 0 - 1506111100
L-H2-021
Firefall Wind Guard Model: 8206-WG This wind guard is for use with your American Fyre Designs firefall. It enhances your unit aesthetically and improves flame appearance. CAUTION: DO NOT touch any part of this accessory during operation and when HOT! The glass panels and other surfaces get HOT and can cause burns if touched. Be sure the firefall and this accessory is completely cool when handling. To install, allow the unit to cool completely, then place the accessory onto the hearth of the unit, being sure that it is centered over the burner trough. See Fig. 1-1. Clean the glass periodically to remove any build-ups caused by the elements and combustion. It is recommended that the glass be cleaned 2-3 times during each heating season, depending on use and environment conditions.
Fig. 1-1
Clean using a non-abrasive glass cleaner and a clean lint-free cloth. ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746 REV 0 - 1506111100
L-H2-021
