Transcript
Product Specifications E15V90P48
Quadplexer, dc bypass port 4
General Specifications Product Type
Quadplexer
Product Family
CBC7182126
Modularity
1-Single
Includes
Mounting hardware
Electrical Specifications Sub-module
1
1
1
1
Branch
1
2
3
4
Port Designation
PORT 1 698-960
PORT 2 1710-1880
PORT 3 1920-2170
PORT 4 2300-2690
License Band
APT 700 CEL 850 CEL 900 EDD 800 LMR 800 LMR 900
DCS 1800
IMT 2100
IMT 2600
Electrical Specifications, Band Pass Frequency Range
698–960 MHz
1710–1880 MHz
1920–2170 MHz
2300–2690 MHz
Insertion Loss, typical
0.10 dB
0.20 dB
0.20 dB
0.15 dB
Return Loss, minimum
18 dB
18 dB
18 dB
18 dB
Return Loss, typical
20 dB
20 dB
20 dB
20 dB
Isolation, minimum
50 dB
50 dB
50 dB
50 dB
Input Power, RMS, maximum
300 W
300 W
300 W
200 W
3rd Order PIM, maximum
-110 dBm
-110 dBm
-110 dBm
-110 dBm
3rd Order PIM Test Method
Two +43 dBm carriers Two +43 dBm carriers Two +43 dBm carriers Two +43 dBm carriers
AISG Electrical Specifications AISG Carrier
2176 KHz ± 100 ppm
Insertion Loss, maximum
0.50 dB
Return Loss, minimum
10 dB
dc Power/Alarm Electrical Specifications dc/AISG Pass-through, combiner
Branch 4
dc/AISG Pass-through, demultiplexer Branch 4 Lightning Surge Current
5 kA
Lightning Surge Current Waveform
8/20 waveform
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 1 of 4 October 16, 2017
Product Specifications E15V90P48
Block Diagram
Mechanical Specifications RF Connector Interface
7-16 DIN Female
RF Connector Interface Body Style
Medium neck
Color
Gray
Mount Type
Pole
Mounting Pipe Diameter
42.6–122 mm
Mounting Pipe Hardware
Band clamps (2)
Wind Speed, maximum
60 m/s
|
Wall
Dimensions Height
210.0 mm | 8.3 in
Width
250.0 mm | 9.8 in
Depth
68.0 mm | 2.7 in
Weight
5.0 kg
|
11.0 lb
Environmental Specifications ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 2 of 4 October 16, 2017
Product Specifications E15V90P48 Operating Temperature
-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity
15%–100%
Ingress Protection Test Method
IEC 60529:2001, IP67
Vibration Test Method
IEC 60068-2-6
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 3 of 4 October 16, 2017
Product Specifications E15V90P48
Outline Drawing
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 4 of 4 October 16, 2017
