Transcript
Subminiature Intermediate Power Relay ERE ❚ Latching types available ❚ High sensitivity ❚ High switching capacity 1A: 8A 250VAC; 2A, 1X(1A +1B): 5A 250VAC ❚ 1 Form A, 2 Form A and 1X(1A+1B) contact arrangement ❚ RoHS compliant ❚ Outline Dimensions: 20.2 x 11.0 x 10.4mm
Options and ordering codes ERE
TN
-
1A
N
-
NIL SN TN
L
Contact Arrangement SPNO DPNO 1XN/O, 1XN/C
1A 2A 1X
S F
N N1
Max. switching voltage Max. switching current Max. switching power Mechanical Life Electrical Life
24VDC
RoHS Compliant
Sealing Sealed Flux Tight
Characteristics 1A,
2A, 1X(1A+1B)
AgNi: Agni + Au:
50mΩ (at 1A 6VDC) 30mΩ (at 1A 6VDC) AgNi, AgNi + Au plated 8A 250VAC 5A 250VAC 5A 30VDC 5A 30VDC 380VAC / 125VDC 8A 5A 2000VA/150W 1250VA/150W 1x107 OPS 1X105 OPS
Coil Data Single side stable (300mW)
at 20˚C
Nominal Voltage VDC 3
Pick-up Voltage VDC 2.4
Drop-out Voltage VDC 0.3
Coil Resistance ± 10% Ω 30 ± 10%
Max.allowable Voltage VDC (at 70˚C) 3.9
5 6 9 12 24
4.0 4.8 7.2 9.6 19.2
0.5 0.6 0.9 1.2 2.4
83 ± 10% 120 ± 10% 270 ± 10% 480 ± 10% 1920 ± 10%
6.5 7.8 11.7 15.6 31.2
ERE/07/07
-
Contact Material AgNi AgNi + Au plated
Contact Data
Contact Rating
L
Coil Voltage
Coil Type Non-Latching Single Coil Latching Double Coil Latching
Contact arrangement Initial material resistance Max. Contact material
S
Initial Insulation Resistance Between coil & contact Dielectric Between open contacts Strength Between contacts sets Operate time (at nomi. Volt) Release time (at nomi. Volt) Set time (latching) Reset time (latching) Functional Shock resistance Destructive Vibration resistance Humidity Ambient temperature Termination Unit Weight Construction
1000MΩ (at 500VDC) 3000VAC 1min. 1000VAC 1min. 2000VAC 1min. Max. 10ms Max. 5ms Max. 10ms Max. 10ms 196m/s2 (20g) 980m/s2 (100g) 10 to 55Hz 2.0mm 5 to 85% RH -40˚C to +70˚C PCB Approx 4.7g Sealed IP67, Flux proof
Coil Coil power
Single side stable 1 coil latching 2 coils latching
300mW 150mW 300mW
www.imopc.com
Subminiature Intermediate Power Relay ERE 1 coil latching (150mW) Nominal Voltage VDC 3 5 6 9 12 24
at 20˚C
2 coils latching (300mW)
Set/Reset Coil Max.allowable Voltage Resistance Voltage VDC VDC ± 10% Ω (at 70˚C) 2.4 60 ± 10% 3.9 4.0 167 ± 10% 6.5 4.8 240 ± 10% 7.8 7.2 540 ± 10% 11.7 9.6 960 ± 10% 15.6 19.2 3840 ± 10% 31.2
Nominal Voltage VDC 3 5 6 9 12 24
at 20˚C
Safety Approval Ratings
Set/Reset Coil Max.allowable Voltage Resistance Voltage VDC VDC ± 10% Ω (at 70˚C) 2.4 30 ± 10% 3.9 4.0 83 ± 10% 6.5 4.8 120 ± 10% 7.8 7.2 270 ± 10% 11.7 9.6 480 ± 10% 15.6 19.2 1920 ± 10% 31.2
8A 250VAC 5A 30VDC 1/6HP 250VAC 5A 250VAC 2 Form A 5A 30VDC 1/10HP 250VAC 5A 250VAC 1A + 1B: 5A 30VDC 1/6HP 250VAC 1 Form A
UL/CUR
Outline dimensions (mm) Wiring diagram and PC Board layout 11
20.2
11
10.16
7.62
10 1.22
2.54
0.8
0.4
10.16
7.62
7.62
2 coils latching
Single side stable & 1 coil latching 2 Form A, 1X(1A+1B)
4-Ø1.2
1Form A
2 Form A, 1X(1A+1B)
2.54
6-Ø1.2
2.54
2.54
2.54
2.54
2.54
2.54
1Form A
0.4
7.62
3.4
0.4
2.54
1.22
0.8
0.4
3.4
10
20.2
8-Ø1.2
6-Ø1.2
Single side stable (De-energised condition) 1 Form A
2 Form A
1X(1A+1B)
1 Form A
2 Form A
1X(1A+1B)
ERE/07/07
reset
set
reset
1X(1A+1B) set
reset
2 Form A set
reset
set
2 coils latching (Reset condition) 1 Form A
reset
set
reset
set
1 coil latching (Reset condition)
www.imopc.com
