Transcript
M A I N T E NA NC E INS TR UC TIONS F OR TECHNICAL COATE D TE XTI LES
CLEANING Initial site cleaning: An initial cleaning is always carried out before using the new material. Always protect the surrounding materials with Marvel’s PVC Sheet or equalent at the time of installation. Use a neutral detergent, pH 7-9 with water to make a foamy solution to wipe clean. Daily Cleaning: Daily cleaning is not required, but if you must, we recommend wiping clean with a damp cloth dipped in warm water. Ensure that the cloth is just moist and not wet. Cleaning with Chemicals: If wet-cleaning is necessary, use a neutral cleaner. Remove residual lime and soap with water Warning: Always follow dosage instructions carefully! Machine cleaning: Machine cleaning or buffing is not required Removing marks and stains: Treat marks and stains immediately. Use methylatedspirits, cleaning spirit or neutral detergent. Wipe afterwards with clean water. Warning: This is only applicable to stain resistant Technical CoatedTextiles General advice: • Technical Coated Textilesare damaged by solvents • Wipe up any split oil immediately because it may damage the surface. • Remember that light colours need to be cleaned more frequently.
G-73 Connaught Circus, New Delhi-110001 (INDIA) | T: +91-11-4530 6666 | F: +91-11-45306677 E:
[email protected] | W: www.marvelvinyls.com
