Transcript
EN
Touch panels TDS12142
Proximity reader
The TELETASK proximity reader is an AUTOBUS interface for secured wireless access control. This means a higher user friendliness thanks to the fact that there is no precise handling needed to put the card in the reader to make a necessary hardware contact. Hold the proximity card or key holder TAG in front of the proximity reader to get access and/or generate any other domotic function. Thanks to the integration with the domotics system, the function is not limited to the opening of a door, but can be combined with any other domotics function (when entering the house, the door opens, the lights are activated, the temperature settings can be changed, music starts playing, etc... TELETASK offers security with an extra: the integration with home automation and a (free of charge) real-time visualisation app PORTA. APPLICATION INSTALLATION For a safe contactless access control in combination with any On-wall mounting in front of any wall box or hole, to contain the other control of a domotic function. Cards and key holder TAGs AUTOBUS cable and connector. can have limited access: between certain hours of the days, When the proximity reader is placed in unsheltered outside only on certain days or any other condition that you want. locations it is necessary to add silicone between the wall and the housing as shown in the mounting drawing. CHARACTERISTICS Remark: Normal operation will be disturbed when the General TDS12142 is installed near or on a metal item. The mounting The proximity reader fits the needs and protection for indoor distance on a metal surface should be enough for good installation. In outdoor application it is necessary to seal the working. TELETASK recommends 4 cm minimum, without back with silicone (between back and wall) against water guarantee that this will be sufficient. infiltration at the AUTOBUS connector. Adding, deleting and changing the access parameters of each The mounting distance between two proximity readers should proximity card/TAG is possible using PROSOFT V2.74 or be 1 meter minimal. Also when two readers are placed back-tohigher (with the integrated CARDSOFT software). back on a wall, this is an important minimum. Cleaning Use only dry microfiber cloth. Never use liquids or solvents!
CONNECTIONS AUTOBUS Through enclosed AUTOBUS connector
LED Feedback TDS12142 Connected: LED blinks slowly Connection error: LED blinks fast Card or TAG detected: LED will be ON for 2 sec.
POWER CONSUMPTION Max. 75 mA DIMENSIONS TDS12142 115 H x 115 W x 15 D (mm) (on top of the wall)
The PORTA app The PORTA app comes free of charge with your TELETASK Card Reader(s). All access events are logged in real time. At any time you can check the given and denied access events on your smartphone, tablet and pc. The PORTA app gives you all the necessary information in a simple and most powerful way.
TDS12142GL 115 H x 115 W x 18 D (mm) (on top of the wall) NET | GROSS WEIGHT TDS12142 0,137 | 0,247 kg
Privacy: For privacy reasons, by default, the family members are not logged by the TELETASK system, but you can activate the access log of individuals when you like.
TDS12142GL 0,147 | 0,257 kg
Important: The local privacy regulations need to be checked by the system integrator to make sure that the individual app configuration complies with them.
PACKAGING CONTENT TDS12142 AUTOBUS connector set + terminating resistor
SETTINGS AUTOBUS address Through rotary switches Tens + Units
STORAGE Temperature -20°C to +65°C
Jumpers Terminating resistor (supplied with the interface). To be used when the interface is at the physical end of the AUTOBUS cable.
Relative humidity 15% to 85%
Programming Proximity reader With PROSOFT V2.74 or higher Proximity card With the reader
©, TELETASK, GENT, 2016
IP PROTECTION RATE IP44 (Follow the mounting instructions to seal the housing at the correct way!)
55
Version August 2016
TELETASK can’t be responsible for potential errors in the data sheets and technical documentation. Changes in the product features can be made at any time, without prior notice
EN
Touch panels SCHEMATIC DRAWING
©, TELETASK, GENT, 2016
56
Version August 2016
TELETASK can’t be responsible for potential errors in the data sheets and technical documentation. Changes in the product features can be made at any time, without prior notice
EN
Touch panels INSTALLATION
DISASSEMBLY
©, TELETASK, GENT, 2016
57
Version August 2016
TELETASK can’t be responsible for potential errors in the data sheets and technical documentation. Changes in the product features can be made at any time, without prior notice
