Transcript
DATA SHEET
Order code 72-9632
Manufacturer code n/a
Description SNAPLED ORG 50DEG (RC)
The enclosed information is believed to be correct, Information may change ‘without notice’ due to product improvement. Users should ensure that the product is suitable for their use. E. & O. E. Sales: 01206 751166
[email protected]
Technical: 01206 835555
[email protected]
Page 1 of 5 Revision A 12/12/2006
Fax: 01206 751188 www.rapidelectronics.co.uk
SnapLED
PRELIMINARY SPEC
L-7701C4SEC-H
Technical Data
Features
½³HIGH LUMINANCE OUTPUT.
½³DESIGN FOR HIGH CURRENT OPERATION. ½³SOLDERLESS MOUNTING TECHNIQUE. ½³LOW POWER CONSUMPTION.
Benefits *Rugged Lighting Products.
½³LOW THERMAL RESISTANCE.
*Electricity savings.
½³LOW PROFILE.
*Maintenance savings.
½³PACKAGED IN TUBES FOR USE WITH
*Environmental Conformance.
AUTOMATIC INSERTION EQUIPMENT.
½³RoHS COMPLIANT.
Typical Applications *Automotive Exterior Lighting. *Solid State Lighting and Signaling.
SPEC NO: DSAE5868
REV NO: V.
DATE: APR/29/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.H.CHEN
PAGE: 1 OF 4
Outline Drawings
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.
Absolute Maximum Ratings at TA=25°C PARAMETER
SE-H
UNITS
DC Forward Current
70
mA
Power dissipation
200
mW
Reverse Voltage
5
V
Operating Temperature
-40 To +85
C C
Storage Temperature
-55 To +85
C C
SPEC NO: DSAE5868
REV NO: V.
DATE: APR/29/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.H.CHEN
PAGE: 2 OF 4
Selection Guide
Part No.
Iv(cd)[1] @70mA MIN. TYP.
LED COLOR
L-7701C4SEC-H
HYPER ORANGE (InGaAlP)
10
Viewing Angle[2] 21/2 Typ.
12
50°
Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized. 2.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Optical Characteristics at TA=25°C IF=70mA Rj-a=200°C/W DEVICE TYPE
L-7701C4SEC-H
PEAK WAVELENGTH λPEAK (nm) TYP.
DOMINANT[1] WAVELENGTH λDOM (nm) TYP.
SPECTRAL LINE WAVELENGTH ∆λ1/2(nm) TYP.
640
630
25
Note: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
Electrical Characteristics at TA=25°C FORWARD VOLTAGE VF»VOLTS)
DEVICE
@ IF=70mA
TYPE
L-7701C4SEC-H
REVERSE CURRENT IR (uA) @ VR=5V
CAPACITANCE C (pF) @ VF=0V F=1MHZ
THERMAL RESISTANCE Rj-pin °C/W
MIN.
TYP.
MAX.
MAX.
TYP.
TYP.
2.5
2.7
3.1
10
27
125
SPEC NO: DSAE5868
REV NO: V.
DATE: APR/29/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.H.CHEN
PAGE: 3 OF 4
Figures
Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAE5868
REV NO: V.
DATE: APR/29/2005
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.H.CHEN
PAGE: 4 OF 4
