Transcript
MAT01 CCTV Tester
FEATURES: • 2.8" TFT/LCD colour display. • Camera video signal strength tester can sense gain-loss strength in cable like low / normal / high & mV. • Colour chart (pattern generator) for monitor testing. • PTZ controller can support preset programming & recall. • Serial data analyst can capture and analyze RS232 & RS485 control data & helps fix the related data. • LAN cable tester & tag number identification. • Multi-protocol support. All major speed dome cameras supported. • Multi-interface and multi-baud rate. • Advance power control system with auto power cut off. • Rechargeable battery, charge for 4 hours and use for 11 hours. • The device has advanced power system, can supply power for camera as well (DC/12/100mA).
SPECIFICATIONS: MAT01 Display Size Display Resolution TV System Tester Mode
2.8" TFT/LCD Display 960 x 240 Pixel NTSC / PAL (Auto Select) A/V Tester, Monitor tester, PTZ Controller, LAN Cable Tester & Data Monitor
Video Tester
For Gain losses in cables testing, Camera demo, Site survey, OSD Setting in camera, camera positioning
Audio Tester
External audio Input / Built in speaker
Monitor Tester
For Monitor fine tuning like colour correction, brightness contrast settings.
PTZ Controller
for controlling of PTZ camera, Preset programing & recall
LAN Cable Tester DATA Terminal Digital Multi meter User Interface Protocol DATA format Baud Rate Power Adaptor Battery Duration Charging/Backup
RJ11, RJ45 can identify cross over, straight through, wrong connection, Cable ID numbers Serial DATA analysis N/A Simple menu setting easy to use American Dynamics, Bosch, CBC, Hik-vision, Kalatel, LG, LiLin, Molynx, Panasonic, PELCO-P/D, SAMSUNG, SANYO SSP, SONY, TeleEye, VCL, Vicon, YAAN RS232, RS 485 & RS22 (Simplex) 150, 300, 600, 1200, 2400, 4800, 9600, 19200Bps Input 100 ~ 230V AC / 50/60Hz & Output 5V DC 1.5Amps Built in rechargeable battery 3.7V 2800mA H 3~4Hrs Charging / Backup 11HRs Approx. under normal operation / with camera load 3Hrs Approx.
External Interface Video Input Video Output Audio Input Communication port Network port
1Ch Composite Video 0.5~1V p-p 75Ohm Auto Termination (BNC) 1Ch Composite Video 1V p-p (BNC) (Mode: Loop out or patter Generator) Mono Audio (3.5mm Stereo Plug) 2Pin Plug for RS485 & Mini USB for RS232 RJ45 port for cable testing
Power Supply Output
DC12V / 100mA (Power Input to cameras)
Power Supply Input
Support USB or Power adaptor for charging
General Product Dimensions Box Dimensions Gross weight Accessories
170mm X 99mm X 48mm 255mm X 87mm X 200mm (W x H x D) 293gm Power adaptor, Rechargeable battery, CCTV tester carry bag, Shoulder strip, User manual, Cable tester, BNC to BNC Patch card, Audio cable, Telemetry cable, Data cable mini USB to 9 pin 'D' connector, DC to DC power cable for camera & USB to DC Pin for charger.
Environment Temperature & Humidity
0°C ~ +50°C / 30% ~ 90% RH
