Transcript
AD-25V Parts Manual 24 VAC Phase 5
American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail:
[email protected] www.amdry.com
020700JCARRITA/DX/tcosta
ADC Part No. 450342
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important For your convenience, log the following information: DATE OF PURCHASE ____________________________
MODEL NO.
AD-25V
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s)
________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents OPL Control Door Assembly For Models Mfd. as of July 1, 2002 .................................................................................................. 3 Coin Control Door Assembly For Models Mfd. as of July 1, 2002 .................................................................................................. 4 Control Door Assembly For Models Mfd. prior to July 1, 2002 .............................................................................................. 5 Phase 5 Coin Microprocessor Control Panel Assembly ....................................................................... 6, 7 Phase 5 OPL Microprocessor Control Panel Assembly ........................................................................... 8 Coin and OPL Control Box Assembly ..................................................................................................... 9 Coin Vault Assembly ............................................................................................................................. 10 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 1, 2000 ..................................................................................... 11 Dual Timer Control Panel Assembly For Models Mfd. prior to November 1, 2000 ................................................................................. 12 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. as of January 25, 2002 ........................................................................................ 13 Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. prior to January 25, 2002 .................................................................................... 14 Front Panel Assembly For Models Mfd. with Steel Main Door as of July 1, 2002 .............................................................. 15 Front Panel Assembly For Models Mfd. with Steel Main Door prior to July 1, 2002 .......................................................... 16 Front Panel Assembly For Models Mfd. with Plastic Main Door ........................................................................................ 17 Main Door “Steel” Assembly ................................................................................................................ 18 Plastic Main Door Assembly ................................................................................................................. 19 Main Door Switch Assembly For Models Mfd. with Steel Main Door .......................................................................................... 20 Main Door Switch For Models Mfd. with Plastic Main Door ........................................................................................ 21 Basket (Tumbler)/Support Assemblies ................................................................................................... 22
Drop Lint Door Assembly For Models Mfd. as of July 1, 2002 ................................................................................................ 23 Lint Trap Assembly For Models Mfd. as of July 1, 2002 ................................................................................................ 24 Lint Drawer/Lint Drawer Switch Assembly For Models Mfd. between July 25, 2000 and July 1, 2002 .............................................................. 25 Lint Drawer/Lint Drawer Switch Assemblies For Models Mfd. prior to July 25, 2000 .......................................................................................... 26 Idler Bearing Assembly ......................................................................................................................... 27 Basket (Tumbler) Bearing Assembly ................................................................................................ 28, 29 Non-Reversing Motor Mount Assembly .......................................................................................... 30, 31 Reversing Motor Mount Assembly .................................................................................................. 32, 33 Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002 .......................................................................................... 34, 35 Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002 ...................................................................................... 36, 37 Gas Burner Assembly For Models Mfd. as of September 29, 2000 ............................................................................. 38, 39 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to September 29, 2000 ......................................................................... 40, 41 Electric Oven Assembly .................................................................................................................. 42, 43 Sail Switch/Hi-Limit Assemblies ............................................................................................................ 44 Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 45 3-Phase (3ø) Motor, Electric Relay Panel Assembly .............................................................................. 46 460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly ....................................................... 47 Reversing Electric Relay Panel Assembly ............................................................................................... 48 460-480 VAC Reversing Electric Relay Panel Assembly ........................................................................ 49 Steam Coil/Air Operated Steam Damper Assembly ......................................................................... 50, 51 Steam Coil/Mechanical Steam Damper Assembly ............................................................................ 52, 53 Outer Top/Back Guard Assemblies ....................................................................................................... 54 Microprocessor Coin Acceptors Listing ................................................................................................ 55 Coin Meter Replacement Parts ............................................................................................................. 56 Electrical Oven Component Application Chart ....................................................................................... 57 Additional Parts Available ..................................................................................................................... 58
OPL Control Door Assembly
3
For Models Mfd. as of July 1, 2002
Illus. No. 1 2
3 4 5 6 7 8 9
Part No.
Qty.
881053 870011 883550
1 1 1
883551
1
883552
1
117604 150317 102603 102601 102502 150321 154011
3 2 1 1 1 2 2
Telephone: (508) 678-9000
Description ADC Logo with Tape Double Sided Tape Kit White Control Door Assembly (includes illus. nos. 2 and 3) Ivory Control Door Assembly (includes illus. nos. 2 and 3) Coral Blue Control Door Assembly (includes illus. nos. 2 and 3) Sponge Tape (sold by the foot) #10-16 x 3/4” TORX + BTN Type 1 Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod #10-32 x 1/2” Phillips Machine Screw #10-32 Multi-Thread U-Nut
Fax: (508) 678-9447
4
Coin Control Door Assembly For Models Mfd. as of July 1, 2002
Illus. No. 1 2 3 4
5 6 7 8 9 10 11
Part No.
Qty.
160015 160104 160016 881053 883477
1 1 1 1 1
883478
1
883549
1
883476 117604 152014 150317 102603 102601 102502
1 6 4 2 1 1 1
American Dryer Corporation
Description High Security Lock Assembly Key ONLY Lock Cam ONLY ADC Logo with Tape White Control Door Assembly with Black Trim (includes illus. nos. 4 through 7) Ivory Control Door with Black Trim (includes illus. nos. 4 through 7) Coral Blue Control Door with Black Trim (includes illus. nos. 4 through 7) Black Trim Strip with Lock Hole Sponge Tape (sold by the foot) 1/4-20 with 3/4” Free Spin Wash Nut #10-16 x 3/4” TORX + BTN Type 1 Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod
88 Currant Road / Fall River, MA 02720-4781
5
Control Door Assembly For Models Mfd. prior to July 1, 2002
Illus. No. 1
2 3 4
5 6 7 8 9 10
Part No.
Qty.
160015 160017 160104 160052 881053 870011 882511
1 1 1 1 1 1 1
882513
1
882512
1
117603 150300 102603 150300 102502 102601
3 2 1 2 1 1
Telephone: (508) 678-9000
Description High Security MK-100 Lock Assembly with Key (for coin models Only) Special Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam ONLY ADC Logo with Tape Double Sided Tape Kit White Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Almond B Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Coral Blue Control Door Assembly Less Lock (includes illus. nos. 4 and 5) Noise Suppressor Tape (sold by the foot) #10-16 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch #10-16 x 1/2” Hex Washer TEK Screw Control Door Support Rod Control Door Rod Retainer Clip
Fax: (508) 678-9447
6
Phase 5 Coin Microprocessor Control Panel Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No. 1 2
Part No.
Qty.
112526 883537
1 1
883538
1
883582
1
883581
1
883539
1
883540
1
883580
1
883579
1
5 6 7
150309 137213 824998 153010 150005 ---------
1 1 1 2 2 1
8
--------
1
9 10
137023 137021 880772 122800 136048
1 3 1 1 1
3 4
11
Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. as of June 25, 2002) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. as of June 25, 2002) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. prior to June 25, 2002) Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, and 4 through 6) (for models mfd. prior to June 25, 2002) Coin Control Panel ONLY (for models mfd. as of June 25, 2002) Coin Control Panel ONLY with Battery Bracket (for models mfd. as of June 25, 2002) Coin Control Panel ONLY (for models mfd. prior to June 25, 2002) Coin Control Panel ONLY with Battery Bracket (for models mfd. prior to June 25, 2002) #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Coin Acceptor (refer to Microprocessor Coin Acceptors Listing on page 55) Optic Switch ONLY (refer to Microprocessor Coin Acceptors Listing on page 55) Optic Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No. 1
2
3
4 5 6 7
Part No.
Qty.
112535 112276 112275
1 1 1
112277
1
112278
1
801255 801256 801206
1 1 1
801207
1
137222 137231 824998 153010 150005 150309 136048
1 1 1 2 2 1 1
Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English Only)...Not Illustrated 3-Language OPL Stick-On Labels (Spanish, Italian, and Hebrew)...Not Illustrated 3-Language OPL Stick-On Labels (English, Spanish, and Hebrew)...Not Illustrated 5-Language OPL Stick-On Labels (Italian, Dutch, French, German, and Chinese)...Not Illustrated Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 5) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 5) Phase 5 OPL Non-Reversing Controller ONLY Phase 5 OPL Reversing Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Coin and OPL Control Box Assembly
Illus. No. 1 2 3 4 5 6 7 8 9 -*
Part No. 132002 150300 150301 131931 137035 323583 150300 122641 122706 122801
Qty. 1 2 2 1 1 1 2 1 * 1
9
Description Transformer (for mechanical steam dampers 208 VAC and higher) #10-16 x 1/2” Hex Washer TEK Screw #8 x 7/16” Phillips Pan Head TEK Screw Steam Valve Relay - 24 VAC (for mechanical steam damper models Only) Motor Capacitor (for mechanical steam damper models Only) Capacitor Bracket (for mechanical steam damper models Only) #10-16 x 1/2” Hex Washer TEK Screw 15-Pin Microprocessor Connector Socket Terminal ONLY Pin/Socket Extraction Tool
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
10
Coin Vault Assembly
Illus. No. 1
Qty.
802112
1
802117 802110
1 1
4
802115 160028 875061 160105* 802020
1 1 1 1 1
5 6 7 8
152014 102502 102601 102603
4 1 1 1
2 3
*
Part No.
Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Microprocessor Coin Vault ONLY Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 5) Non-Microprocessor Coin Vault ONLY Cam for 1/4 Turn Lock ONLY 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 4) 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch
Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Dual Timer “Tap Touch” Controls
11
For Models Mfd. as of November 1, 2000
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8
824298 824299 824175 122301 131932 120730 151000 882903
1 1 1 1 3 1 6 1
9 10 11 12 13 14 15
850392 153010 152000 150207 150110 112563 124104 124105
2 3 2 4 1 1 1
Telephone: (508) 678-9000
Description 15 Minute Timer - 24 VAC 60 Minute Timer - 24 VAC Red Pilot Light - 24 VAC “Tap Touch” Switch Relay SPST 24v 30-Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2” Phillips Pan Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer
Fax: (508) 678-9447
12
Dual Timer Control Panel Assembly For Models Mfd. prior to November 1, 2000
Illus. No. 1 2 3
4 5 6 7 8 9 10 11 12 13 14 15 16 17 ---
Part No.
Qty.
123005 122400 882596
1 1 1
882600
1
850456 131917 150207 154001 152000 153010 120730 150110 131932 151000 112050 124103 124025 124030 132198 882540 882573
1 1 2 2 2 2 1 4 1 4 1 2 1 1 1 1 1
American Dryer Corporation
Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 16) Dual Timer Reversing Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 17) Dual Timer Control Panel ONLY Push-To-Start Relay - 24 VAC #10-24 x 1/2” Phillips Pan Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label ONLY Arrow Timer Knob 60 Minute Timer - 24 VAC 15 Minute Timer - 24 VAC Reversing Timer - 24 VAC Panel Wiring (non-reversing panel)...Not Illustrated Panel Wiring (reversing panel)...Not Illustrated
88 Currant Road / Fall River, MA 02720-4781
13
Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. as of January 25, 2002
Illus. No. 1 2 3
4 5 6 7 8 9 10 11 12 --
Part No.
Qty.
123005 122400 824172
1 1 1
824109 131932 154001 123225 125601 153010 152016 120712 150300 122602 122700 122801
1 1 2 1 1 2 2 1 1 1 7 1
Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Less Coin Meter (includes illus. nos. 2 through 5, 7, and 8) Coin Meter Control Panel ONLY 24 VAC Relay #10-24 Speed Nut (used on P/N: 131932, 24 VAC relay) Green Push-To-Start Button 25¢ Coin Meter - 24 VAC (specify timing) #6 Star Washer #4-40 Hex Nut 12-Position Terminal Block #10-16 x 1/2” Hex Washer TEK Screw 9-Pin Connector Pin Terminal ONLY Pin Extraction Tool
NOTE: For Coin Meter Replacement Parts refer to page 56. Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Non-Microprocessor Coin Meter Control Panel Assembly For Models Mfd. prior to January 25, 2002
Illus. No.
*
Part No.
Qty.
1 2 3
123005 122400 824020
1 1 1
4 5 6 7* 8 9 10 11 12 --
800054 131917 150207 154001 125601 150303 120712 150309 122602 122700 122801
1 1 2 2 1 2 1 1 1 9 1
Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 6, and 8 through 12) Coin Meter Control Panel ONLY Push-To-Start Relay - 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut 25¢ Coin Meter - 24 VAC (specify timing) #4 x 3/4” Pan Head “A” Screw 12-Position Terminal Block #10-16 x 1/2” Hex Head TEK Crimptite Screw 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool
Consult factory for coin meters not listed.
NOTE: For Coin Meter Replacement Parts refer to page 56. American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
15
Front Panel Assembly For Models Mfd. with Steel Main Door as of July 1, 2002
Illus. No. 1
Part No.
Qty.
883567
1
883568
1
883569
1
3
150313 150318 --------
11 1 1
4 5 6
122002 170330 154215
1 1 2
2
Telephone: (508) 678-9000
Description White Front Panel Assembly (includes illus. nos. 1, 3, and 5 through 6) Ivory Front Panel Assembly (includes illus. nos. 1, 3, and 5 through 6) Coral Blue Front Panel Assembly (includes illus. nos. 1, 3, and 5 through 6) #10-16 x 1/2” TORX + BTN Type 1 25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw) Main Door Hinge (refer to Main Door “Steel” Assembly on page 18) Lint Drawer Switch Friction Door Latch 5/32” Pop Rivet
Fax: (508) 678-9447
16
Front Panel Assembly For Models Mfd. with Steel Main Door prior to July 1, 2002
Illus. No. 1
Part No.
Qty.
883137
1
883138
1
883139
1
3
150313 150318 --------
11 1 1
4
--------
1
5 6
170330 154215
1 2
2
American Dryer Corporation
Description White Front Panel Assembly (includes illus. nos. 1, 5, and 6) Coral Blue Front Panel Assembly (includes illus. nos. 1, 5, and 6) Ivory Front Panel Assembly (includes illus. nos. 1, 5, and 6) #10-16 x 1/2” TORX + BTN Type 1 25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw) Main Door Hinge (refer to Main Door “Steel” Assembly on page 18) Lint Drawer Switch (refer to Lint Drawer/Lint Drawer Switch Assembly on page 25) Friction Door Latch 5/32” Pop Rivet
88 Currant Road / Fall River, MA 02720-4781
17
Front Panel Assembly For Models Mfd. with Plastic Main Door
Illus. No. 1
Part No.
Qty.
882529
1
882530
1
882531
1
2 3 4
150309 121405 --------
11 1 1
5 6
170330 154215
1 2
Telephone: (508) 678-9000
Description White Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) Almond B Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) Coral Blue Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) #10-16 x 1/2” Hex Head TEK Crimptite Screw Rubber Grommet Lint Drawer Switch (refer to Lint Drawer/Lint Drawer Switch Assemblies on page 26) Friction Door Latch 5/32” Pop Rivet
Fax: (508) 678-9447
18
Main Door “Steel” Assembly
Illus. No.
Part No.
Qty.
1
881150
1
2 3
102354 170731 881152
1 1 1
4 5 6
150445 153031 881151
2 1 1
7 8 9 10 11 12 13 14 15
150445 150683 152014 151010 150125 150683 152014 881210 102211 170731
2 3 3 1 1 3 3 1 1 1
American Dryer Corporation
Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Black Gasket Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5, 6, and 7) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut Black Main Door Handle ONLY 20-7/16” Door Glass Black Glass Adhesive (10.3 oz. cartridge)
88 Currant Road / Fall River, MA 02720-4781
Plastic Main Door Assembly
Illus. No.
Part No.
Qty.
1
881422
1
2 3 4 5
800448 150410 152014 102349 170730 102212 170730 150448 170319 150431
1 4 4 1 1 1 1 4 4 1
6 7 8 9
Telephone: (508) 678-9000
19
Description Black Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket Clear Gasket Adhesive (10.3 oz. cartridge) 20-7/16” Door Glass with Four (4) Holes Clear Glass Adhesive (10.3 oz. cartridge) 1/2” Stainless Steel Flat Head Allen Screw Door Glass (nylon) Spacer Main Door Latch Screw (#10 x 7/16” dome hex head screw)
Fax: (508) 678-9447
20
Main Door Switch Assembly For Models Mfd. with Steel Main Door
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
150006 152013 153010 137005 122636 881211 881153
2 2 2 1 2 1 1
7
150301
2
American Dryer Corporation
Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Door Switch Flag Terminal Black Main Door Switch Housing ONLY Black Main Door Switch Housing Complete (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16” Phillips Pan Head TEK Screw
88 Currant Road / Fall River, MA 02720-4781
21
Main Door Switch For Models Mfd. with Plastic Main Door
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
152013 153008 137005 121028 154281 800448
2 2 1 2 2 1
7 8 9 10
153565 881246 150201 121405
2 1 2 1
Telephone: (508) 678-9000
Description #6-32 Hex Nut #6 Lock Washer Single Pole Door Switch Insulated Female Terminal 3/8” Standard Nylon Spacer 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6-32 x 1” Self-Clinching Stud Main Door Switch Housing #10-32 x 1/4” Phillips Pan Head Screw Rubber Grommet
Fax: (508) 678-9447
22
Basket (Tumbler)/Support Assemblies
Illus. No. 1*
2 3 4 5 6 7 8 9 10 -*
Part No.
Qty.
800702 817085
1 1
800731 800752
1 1
150413 301305 301420 116002 100901 153001 817084 152004 153002 153001 401010
24 4 4 1 4 4 1 4 4 4 1
Description Galvanized Basket (tumbler) ONLY (without felt collar) Galvanized Basket (tumbler)/Support Assemblies Complete (includes illus. nos. 1 through 10) Stainless Steel Basket (tumbler) ONLY (without felt collar) Stainless Steel Basket (tumbler)/Support Assemblies Complete (includes illus. nos. 1 through 10) #10-16 x 1/2” TORX Crimptite Galvanized Basket (tumbler) Rib ONLY Stainless Steel Basket (tumbler) Rib ONLY Felt Collar ONLY 5/16-18 x 20” Tie Rod 5/16” Flat Washer Basket (tumbler) Support ONLY 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer #847 Adhesive for Felt Collar (5.0 oz. tube)
Felt collar is not included and must be ordered separately.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Drop Lint Door Assembly
23
For Models Mfd. as of July 1, 2002
Illus. No. 1
2 3 4
Part No.
Qty.
802277
1
802265
1
117604 170226 160001 160103
5 1 1 1
Telephone: (508) 678-9000
Description Drop Lint Door (for OPL models) (includes illus. nos. 1 through 3) Drop Lint Door (for coin models) (includes illus. nos. 1, 2, and 4) Sponge Tape (sold by the foot) Slide Latch (for OPL models) Lint Door AD-100 Lock (for coin models) Key ONLY
Fax: (508) 678-9447
24
Lint Trap Assembly For Models Mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
1
800401
1
2 3 4 5
800443 154200 150300 304100 800500
1 6 3 1 2
American Dryer Corporation
Description Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) Lint Trap ONLY 5/32” Pop Rivet #10-16 x 1/2” Hex Washer TEK Screw Lint Screen Holder ONLY Lint Screen Assembly
88 Currant Road / Fall River, MA 02720-4781
Lint Drawer/Lint Drawer Switch Assembly
25
For Models Mfd. between July 25, 2000 and July 1, 2002
Illus. No. 1
Part No.
Qty.
883140
1
883136
1
883135
1
6
117605 122116 122605 122701 122801 818087
5 1 2 4 1 1
7 8 9
304136 150301 122700 122604
1 2 4 2
2 3 4 5
Telephone: (508) 678-9000
Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Coral Blue Lint Drawer Assembly (includes illus. nos. 1 and 2) Ivory Lint Drawer Assembly (includes illus. nos. 1 and 2) Gasket (sold by the foot) Lint Drawer Switch 4-Pin Socket Connector ONLY Socket Terminal ONLY Pin/Socket Extraction Tool Lint Drawer Switch Box Assembly (includes illus. nos. 3 through 6) Lint Drawer Switch Box Cover ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal ONLY 4-Pin Connector ONLY
Fax: (508) 678-9447
26
Lint Drawer/Lint Drawer Switch Assemblies For Models Mfd. prior to July 25, 2000
Illus. No.
Part No.
Qty.
1
882616
1
882614
1
882615
1
7
117605 108223 122116 122605 122701 122801 800478
5 1 1 2 4 1 1
8 9 10
304136 150301 122700 122604
1 2 4 2
2 3 4 5 6
American Dryer Corporation
Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Almond B Lint Drawer Assembly (includes illus. nos. 1 and 2) Coral Blue Lint Drawer Assembly (includes illus. nos. 1 and 2) Noise Suppressor Tape (sold by the foot) Lint Screen Assembly Lint Drawer Switch 4-Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool Lint Drawer Switch Box Assembly (includes illus. nos. 4 through 7) Lint Drawer Switch Box ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Pin Terminal ONLY 4-Pin Connector ONLY
88 Currant Road / Fall River, MA 02720-4781
27
Idler Bearing Assembly
Illus. No. 1
Part No.
Qty.
100107
1
100108
1
2 3
101129 100103 100112
1 1 1
4 5 6
154301 100705 882576
2 1 1
7 8 9 10 11 12
150617 153005 153004 801009 152004 150509
2 2 2 1 1 1
Telephone: (508) 678-9000
Description 5L-670 V-Belt (basket [tumbler] to idler) (for non-reversing models Only) 5L-680 V-Belt (basket [tumbler] to idler) (for reversing models Only) 9” x 2-1/2” Compound Pulley 4L-510 V-Belt (for non-reversing models Only) 4L-610 V-Belt (idler to motor) (for reversing models Only) 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt
Fax: (508) 678-9447
28
Basket (Tumbler) Bearing Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
Illus. No. 1 2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18
Part No.
Qty.
153002 880213 153002 152004 150501 153002 153004 801100
3 1 3 3 4 4 4 1
801105 150608 152004 150501 880201 153002 152004 101100 101118 101110 154301 100713 100107
1 2 2 3 1 3 3 1 1 1 2 1 1
100108
1
Telephone: (508) 678-9000
29
Description 5/16” Lock Washer 1-1/4” Flange Bearing with Nylock Setscrew 5/16” Lock Washer 5/16-18 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 3/8” Flat Washer 1” Bearing Box Assembly Complete (includes illus. nos. 8 through 14) Bearing Box ONLY 5/16-18 x 1-1/4” Allen Setscrew 5/16-18 Hex Nut 5/16-18 x 3/4” Hex Head Machine Bolt 1” Flange Bearing with Nylock Setscrew 5/16” Lock Washer 5/16-18 Hex Nut 18” Pulley ONLY 18-3/4” Pulley (for reversing models Only) 1” Taper Lock Hub (for reversing models Only) 5/16-18 x 5/16” Setscrew 1/4” x 1/4” x 7/8” Key 5L-670 V-Belt (basket [tumbler] to idler) (for non-reversing models Only) 5L-680 V-Belt (basket [tumbler] to idler) (for reversing models Only)
Fax: (508) 678-9447
30
Non-Reversing Motor Mount Assembly
Illus. No.
Part No.
Qty.
1 2
100103 100701
1 1
3
101104
1
101132
1
101133
1
101131
1
150501 153002 153001 100065
4 4 4 1
181049 100066
1 1
4 5 6 7
American Dryer Corporation
Description 4L-510 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key (for use on 3ø models Only) 1/2” x 2” Motor Pulley (for use on 1ø - 60 Hz motors Only) 5/8” x 2” Motor Pulley (for use on 3ø - 60 Hz motors Only) 5/8” x 2-1/4” Motor Pulley (for use on 100066 and 100007 - 50 Hz motors Only) 1/2” x 2-1/4” Motor Pulley (for use on 181049 motors Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 100-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Plug-Type Motor 1/2 HP 240v 1ø 50 Hz Plug-Type Motor 1/2 HP 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Plug-Type Motor (for 50 Hz models mfd. prior to August 22, 2002)
88 Currant Road / Fall River, MA 02720-4781
Non-Reversing Motor Mount Assembly (continued)
Illus. No. 8 9 10 11 12 13 14 15
16 17 18 19 20 21 22*
*
Part No.
Qty.
122701 122801 137030 152004 153002 153001 117604 154000 850017 817075
8 1 1 4 4 4 4 4 1 1
817076
1
817080*
1
883271*
1
153050 100604 100702 153050 152006 120200 100007
2 1 1 2 2 1 1
31
Description Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Sponge Tape (sold by the foot) 5/16-18 Tinnerman Nut 1/2 HP Motor Mount ONLY (56Z frame) 1/2 HP 115-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1/2 HP 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2” S.A.E. Flat Washer 12-1/2” Impellor with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” 90º Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame)
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
32
American Dryer Corporation
Reversing Motor Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
Reversing Motor Mount Assembly
Illus. No. 1 2 3
Qty.
100112 100701 101132
1 1 1
101133
1
4 5 6 7 8 9
120200 181003 150501 153002 153001 100007
1 1 4 4 4 1
10 11 12 13 14 15 16 17 18
120200 150501 153002 153001 154000 152004 153002 153001 850070
1 4 4 4 8 4 4 4 1
803802*
1
803803*
1
117604 153050 100702 100604 153050 152006
4 2 1 1 2 2
19 20 21 22 23 24 *
Part No.
33
Description 4L-610 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2” Motor Pulley (for 60 Hz models Only) 5/8” x 2-1/4” Motor Pulley (for 50 Hz models Only) 3/8” x 90º Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Motor (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 3/8” x 90º Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16” Tinnerman Nut 5/16” Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount ONLY (56Z frame) (includes illus. nos. 18 and 19) Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (for 60 Hz models Only) (includes illus. nos. 2 through 14 and 18 through 24) Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (for 50 Hz models Only) (includes illus. nos. 2 through 14 and 18 through 24) Sponge Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 12-1/2” Impellor with 1/2” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies
35
For Models Mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
1
880251
1
2 3 4 5 6 7 8 9 10
130301 153010 152000 121028 122701 122605 154007 150005 801424
1 2 2 2 4 1 2 2 1
11 12 13 14 15 16 17 18 19 20 21 22 23 24
305007 122604 122700 150301 150005 130111 130100 130103 130101 153010 152000 840065 121028 122701 122605 818007
1 1 4 2 5 1 1 1 1 5 5 1 8 4 1 1
25
818321
1
305007 122604 122700 122801 150301
1 1 4 1 2
26 27 28
Telephone: (508) 678-9000
Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Large Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° Large Thermostat 150° Large Thermostat 225° Large Manual Reset Thermostat 180° Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY Sensor Bracket Harness Assembly (includes illus. nos. 21 through 24) Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
36
Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies
37
For Models Mfd. prior to July 1, 2002 Illus. No.
Part No.
Qty.
1
882533
1
2 3 4 5 6 7 8 9 10
130301 153010 152000 121028 122701 122605 154007 150005 817046
1 2 2 2 4 1 2 2 1
818084
1
322062
1
322080
1
122604 122700 150301 150005 130111 130100 130301 130101 153010 152000 882535 121028 122701 122801 122605 882534
1 4 2 5 1 1 1 1 5 5 1 4 4 1 1 1
818083
1
882536
1
322062
1
322080
1
122604 122700 150301
1 4 2
11 12 13 14 15 16 17 18 19 20 21 22 23 24
25
26 27 28
Telephone: (508) 678-9000
Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 7) 225º Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Round Head Machine Screw Microprocessor Sensor Bracket Assemblies Complete (for models mfd. prior to May 2, 2000) (includes illus. nos. 1 through 10) Microprocessor Sensor Bracket Assemblies Complete (for models mfd. between May 2, 2000 and July 1, 2002) (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY (for models mfd. prior to May 2, 2000) Universal Sensor Bracket ONLY (for models mfd. between May 2, 2000 and July 1, 2002) 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Slotted Round Head Machine Screw 130º Thermostat 150º Thermostat 225º Manual Reset Thermostat 180º Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper Insulated Terminal ONLY Socket Terminal ONLY Pin/Socket Extraction Tool 4-Pin Socket Connector ONLY Sensor Bracket Harness Assembly (includes illus. nos. 22 through 24) Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats (for models mfd. between May 2, 2000 and July 1, 2002) (includes illus. nos. 14 through 25) Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats (for models mfd. prior to May 2, 2000) (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY (for models mfd. prior to July 1, 2002) Universal Sensor Bracket ONLY (for models mfd. between May 2, 2000 and July 1, 2002) 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
38
Gas Burner Assembly For Models Mfd. as of September 29, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
39
Gas Burner Assembly For Models Mfd. as of September 29, 2000
Illus. No.
Part No.
Qty.
1 2 3 4
141104 151001 150108 140818* 140802* 141230 318714 150309 128927 880960 809307 801048 817027 150300 152013 142707 142506 142600 142800 817058**
2 2 2 2 2 1 1 5 1 1 1 1 1 9 2 1 1 1 1 1
817059
1
817088 882267 880604***
1 1 1
5 6 7 8 9 10 11 12 13 14 15 16 17 18
Description Small Tube Burner #8-32 Pal Nut #8-32 x 1/2” Phillips Pan Head Machine Screw #31 Orifice (natural gas) #50 Orifice (liquid propane [L.P.] gas) 1/2” Direct Spark Ignition (DSI) Manifold (2-port) 1-Piece Gas Valve Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Natural Gas Valve Liquid Propane (L.P.) Gas Valve Ignitor-Probe Assembly Direct Spark Ignition (DSI) Module (three [3] tries) Direct Spark Ignition (DSI) Module Mounting Bracket #10-16 x 1/2” Hex Washer TEK Screw #6-32 Hex Nut 1/2” x 1-1/2” Long Black Nipple 1/2” Street Elbow 1/2” Black Union 1/2” x 18” Pipe Direct Spark Ignition (DSI) Burner Box - Natural Gas (includes illus. nos. 1 through 3 and 5 through 18) Direct Spark Ignition (DSI) Burner Box - Liquid Propane (L.P.) Gas (includes illus. nos. 1 through 3 and 5 through 18) Direct Spark Ignition (DSI) Burner Box ONLY AD-25V L.P. Conversion Kit (includes orifices) Steam to Gas Interface Assembly
* Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. *** Needed when converting steam heat to gas heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to September 29, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Burner Assembly
41
For Models Mfd. prior to September 29, 2000
Illus. No. 1 2 3 4* 5 6 7 8
9 10 11 12 13 14 15 16 17 18
--***
Part No.
Qty.
141104 151001 150108 140818 140802 141230 318700 150300 128927 880960
2 2 2 2 2 1 2 2 1 1
880134 882537 128935 817027 150309 152013 141313 142800 318712 150309 817058**
1 1 1 1 3 2 1 1 1 4 1
817059
1
817088 882267 882604
1 1 1
Description Small Tube Burner #8-32 Pal Nut #8-32 x 1/2” Pan Head Machine Screw #31 Burner Orifice (natural gas) #50 Burner Orifice (liquid propane [L.P.] gas) 1/2” Direct Spark Ignition (DSI) Manifold (2-port) Pipe Bracket (bent) #10-16 x 1/2” Hex Washer TEK Screw Natural Gas Valve 1/2” Direct Spark Ignition (DSI) Gas Valve with Liquid Propane (L.P.) Kit Combination Ignitor Probe Assembly Flame-Probe Wire Johnson Controls Direct Spark Ignition (DSI) Module with Three (3) Tries Direct Spark Ignition (DSI) Module Mounting Bracket Assembly #10-16 x 1/2” Hex Head TEK Crimptite Screw #6-32 Hex Nut 90º x 1/2” x 1” Gas Shut Off Assembly 1/2” x 18” Pipe Gas Valve Pipe Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Direct Spark Ignition (DSI) Burner Box - Natural Gas (includes illus. nos. 1 through 3 and 5 through 18) Direct Spark Ignition (DSI) Burner Box - Liquid Propane (L.P.) Gas (includes illus. nos. 1 through 3 and 5 through 18) Direct Spark Ignition (DSI) Burner Box ONLY AD-25V Liquid Propane (L.P.) Conversion Kit (includes orifices) Steam to Gas Interface Assembly
* Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. *** Needed when converting steam heat to gas heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
42
American Dryer Corporation
Electric Oven Assembly
88 Currant Road / Fall River, MA 02720-4781
43
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1
803003* ---------* ---------* 150300 802800 802801
1 1 2 1 1
154004 150309 802799 122200 150303 105500 319202 154002 150300 803100 320611 150301 130400 150300 154001 121010 152014 --------* --------* 120081 120080 152008 121011* --------* 153009 321300 150207 882604**
1 2 1 1 2 1 1 1 2 1 1 3 1 2 1 1 3 1 1 1 1 1
2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Description Small Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Bracket and Cover ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #8-18 x 7/16 Phillips Pan Head TEK Screw 290º Hi-Limit Thermostat #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar Oven Wire with Crimp Lug #10 Star Washer (2 per element) Small Electric Oven Right Side Cover ONLY #10-24 x 1/2” Phillips Head Machine Screw Steam to Electric Interface Assembly
* Refer to Electrical Oven Component Application Chart on page 57. ** Needed when converting steam heat to electric heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
44
Sail Switch/Hi-Limit Assemblies
Illus. No.
Part No.
Qty.
Description Twin Speed Nut #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box Cover and Bracket ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Sail Switch Box with Cover and Bracket ONLY Sail Switch Assembly Complete (includes illus. nos. 1 through 9) 1/2” x 18” Pipe #10-16 x 1/2” Hex Washer TEK Screw Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #6-32 x 1/2” Round Head Machine Screw 330º Hi-Limit Manual Reset Thermostat
1 2 3 4 5 6 7 8 9
154004 150300 802799 150303 122200 105500 319202 154002 802800 802801
1 2 1 2 1 1 1 1 1 1
10 11 12 13 14 15
142800 150300 319704 151000 150001 130201
1 2 1 2 2 1
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
45
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Illus. No. 1 2 3 4 5
6
7 8 9 10 11 12 13 14 15
Part No.
Qty.
151000 150300 150008 120716 322817 882662
2 2 2 1 1 1
882663
1
818395
1
882652 882653
1 1
818396 136008 136049 136057 150301 150297 152004 121010 153002 132459 121300
1 1 or 2 1 2 1 1 1 1 1 1 3
Telephone: (508) 678-9000
Description #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 2-Position Terminal Block Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete - 120 Volt (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete - 208-240 Volt (for gas and steam heated models Only) (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete - 208-240 Volt (for electric heated models Only) (includes illus. nos. 1 through 14) Transformer Assembly - 120 Volt Transformer Assembly - 208-240 Volt (for gas and steam heated models Only) Transformer Assembly - 208-240 Volt (for electric heated models Only) Fuse Holder ONLY 3/4-Amp (Slo-Blo) Fuse ONLY - 120 Volt 1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Open/Closed Bushing
Fax: (508) 678-9447
46
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Illus. No. 1 2 3 4 5
6 7 8 9 10 11 12 13 14 15
Part No.
Qty.
151000 150300 150008 120701 120716 322817 882664
2 2 2 1 1 1 1
818400
1
882665
1
818395
1
882667
1
882653 818396 882654 136008 136057 150301 150297 152004 121010 153002 132459 121300
1 1 1 2 2 2 1 1 1 1 1 3
American Dryer Corporation
Description #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4-Position Terminal Block (for models mfd. with 3ø motors) 2-Position Terminal Block (for models mfd. with 1ø motors) Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete - 208-240 Volt For Gas and Steam Models ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly - 208-240 Volt For Electric Heated Models ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete - 380-416 Volt For Gas and Steam Models ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete - 208-240 Volt For Electric Heated Models ONLY For Models Mfd. with Single-Phase (1ø) Motor ONLY (includes illus. nos. 1 through 14) Rear Electric Panel Assembly Complete - 380-416 Volt For Electric Heated Models ONLY For Models Mfd. with Single-Phase (1ø) Motor ONLY (includes illus. nos. 1 through 14) Transformer Assembly - 208-240 Volt for Gas and Steam Models ONLY Transformer Assembly - 208-240 Volt for Electric Heated Models ONLY Transformer Assembly - 380-416 Volt Fuse Holder ONLY 1/2-Amp (Slo-Blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Open/Closed Bushing
88 Currant Road / Fall River, MA 02720-4781
460-480 VAC 3-Phase (3Ø) Motor, Electric Relay Panel Assembly
Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16
Part No.
Qty.
150009 120701 830208 824161 135501 120768 150301 150297 152004 121010 153002 132459 322817 883332
2 1 1 1 1 2 4 2 1 1 1 1 1 1
830262
1
151000 120765 121300 141403
2 4 1 1
Telephone: (508) 678-9000
47
Description #6-32 x 1-1/2” Phillips Pan Head Machine Screw 4-Position Terminal Block Transformer Assembly (460 VAC) for Micro Models ONLY Transformer Assembly (460 VAC) for Non-Micro Models ONLY 1-Amp Double-Pole Circuit Breaker (460 VAC Only) 35 x 15mm Din Rail #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Ground Screw 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 24 VAC 3-Pole Contactor Mounting Plate ONLY Rear Panel Assembly Complete (460 VAC) for Micro Models ONLY (includes illus. nos. 1 through 14) Rear Panel Assembly Complete (460 VAC) for Non-Micro Models ONLY (includes illus. nos. 1 through 14) #6-32 Pal Nut End Stop Open/Closed Bushing Control Voltage Transformer (24V) for Micro Models ONLY
Fax: (508) 678-9447
48
Reversing Electric Relay Panel Assembly
Illus. No. 1 2 3 4 5
6 7 8 9 10 11 12 13 14
15 16
Part No.
Qty.
150300 150008 120701 132458 882653 825428 882654 136008 136057 150301 150297 152004 121010 153002 132459 322812 882673
2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
883335
1
882676
1
151000 120765
2 1
American Dryer Corporation
Description #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4-Position Terminal Block 3-Pole Reversing Contactor Transformer Assembly - 208-240 Volt for Gas and Steam Models ONLY Transformer Assembly - 208-240 Volt for Electric Heated Models ONLY Transformer Assembly - 380-416 Volt Fuse Holder ONLY 1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Hex Washer TEK Screw (green) 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete - 208-240 Volt For Gas and Steam Models ONLY (includes illus. nos. 1 through 16) Rear Electric Panel Assembly Complete - 208-240 Volt For Electric Heated Models ONLY (includes illus. nos. 1 through 16) Rear Electric Panel Assembly Complete - 380-416 Volt (includes illus. nos. 1 through 16) #6-32 Pal Nut Standard End Bracket
88 Currant Road / Fall River, MA 02720-4781
49
460-480 VAC Reversing Electric Relay Panel Assembly
Illus. No. 1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 *
Part No.
Qty.
132458 150297 121010 152004 153002 132459 150300 830208 824161 120765 322817 883327
1 1 1 1 1 1 4 1 1 2 1 1
--------*
1
151000 150009 120701 135501 120768 112068 121300 141403
2 2 1 1 2 1 1 1
Description 24 VAC Reversing Contactor #10 x 1/2” Hex Head TEK Screw (green) L-70 Ground Lug 5/16-18 Hex Nut 5/16” Lock Washer 24 VAC 3-Pole Blower Contactor #10-16 x 1/2” Hex Washer TEK Screw Transformer Assembly (460 VAC) for Micro Models ONLY Transformer Assembly (460 VAC) for Non-Micro Models ONLY End Stop Mounting Plate ONLY 460 VAC Reversing Rear Electric Panel Assembly Complete For Micro Models ONLY (includes illus. nos. 1 through 16) 460 VAC Reversing Rear Electric Panel Assembly Complete For Non-Micro Models ONLY (includes illus. nos. 1 through 16) #6-32 Pal Nut #6-32 x 1-1/2” Phillips Pan Head Machine Screw 4-Position Terminal Block 1-Amp Double-Pole Circuit Breaker 35 x 15mm Din Rail (sold by the inch) 3-Phase (3ø) Power Input Label Open/Closed Bushing Control Voltage Transformer (24V) for Micro Models ONLY
Not available at time of printing. Contact factory for additional information.
Telephone: (508) 678-9000
Fax: (508) 678-9447
50
American Dryer Corporation
Steam Coil/Air Operated Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
Steam Coil/Air Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
165013 153002 152004 152002 153007 820321 880835
1 6 6 4 4 2 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
153007 152002 115995 102350 151006 152051 100495 323365 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520
4 4 48 1 1 1 1 2 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1
Telephone: (508) 678-9000
51
Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Steam Damper Foam (68-1/2” length) 5/16-24 Stainless Steel Acorn Nut 5/16-24 Right Hand Jam Nut 11/16” Dia. x 3” Stroke Piston Left and Right Piston Support 1/4-20 Hex Nut 1/4” Lock Washer 1/4” Poly x 1/8” M.P.T. Connector 1/4” Poly-Flo Tubing 1/4” Poly x 1/8” M.P.T. Connector 1/8” Needle Valve 1/8” Brass Close Nipple 3-Way Micro Valve - 24 VAC #6-32 x 1” Phillips Round Head Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler)
Fax: (508) 678-9447
52
American Dryer Corporation
Steam Coil/Mechanical Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
53
Steam Coil/Mechanical Steam Damper Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
165013 153002 152004 152002 153007 820321 880835
1 6 6 4 4 2 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
115995 102350 309300 154300 153002 104052 150110 153012 312315 153022 154300 850268 150110 153012 312315 104054 100511 122120 150026 122120 150026 153012 150102 --------*
48 1 1 1 1 1 2 2 1 1 1 1 2 2 1 1 1 1 2 1 2 2 2 1
Description Steam Coil Assembly ONLY 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 8, and 9) Steam Damper Gasket (sold by the inch) 68-1/2” Long Steam Damper Foam Rod Bracket 1/2” x 3/32” Cotter Pin #10 Steel Burr Mechanical Steam Damper Actuator Rod #8-32 x 1/4” Phillips Round Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount #10 Steel Burr 1/2” x 3/32” Cotter Pin Mechanical Steam Damper Arm #8-32 x 1/4” Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount Mechanical Steam Damper Motor Mechanical Steam Damper Switch Plate Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw Mechanical Steam Damper Switch #4-40 x 5/8” Phillips Pan Head Machine Screw #8 Star Washer #8-32 x 3/8” Pan Head Machine Screw Mechanical Steam Damper Motor Cam
* The mechanical steam damper motor cam is part of the mechanical steam damper motor.
Telephone: (508) 678-9000
Fax: (508) 678-9447
54
Outer Top/Back Guard Assemblies
Illus. No. 1 2 3* 4 5 6* 7
8 9 10
*
Part No.
Qty.
322809 150301 314424 322075 150301 150300 312545 322082
1 4 1 1 7 10 1 1
322018
1
150301 103500 882099
13 4 1
Description Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Gas Top Back Guard Electric Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw #10-16 x 1/2” Hex Washer TEK Screw Outer Top Bottom Back Guard (for models mfd. as of March 19, 2001) Bottom Back Guard (for models mfd. prior to March 19, 2001) #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg 8” to 10” Transition Piece (for models mfd. prior to March 19, 2001)
There is no outer top or top back guard on steam models.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
55
Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch. Replacement optic switch for Hanke acceptors is Part No. 881143. Replacement optic switch for Greenwald acceptors is Part No. 137056.
Single Coin* ADC Part No.
Nation
883363
United States
882689
United States
125100
U.S. and Canada
125107 881768 881604 125103 125121 125133
Australia Australia Japan ----Hong Kong
Description 25¢ Hanke Optic Coin Acceptor with Four (4) Studs (for models mfd. as of June 25, 2002) 25¢ Hanke Optic Coin Acceptor (for models mfd. between June 15, 2000 and June 25, 2002) 25¢ Greenwald Optic Coin Acceptor (for models mfd. prior to June 15, 2000) 20¢ Greenwald Australian Optic Coin Acceptor $1 Hanke Australian Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor 0.882 Token Greenwald Optic Coin Acceptor 0.800 Token Greenwald Optic Coin Acceptor $1 Greenwald Hong Kong Optic Coin Acceptor
Dual Coin* 881508 881842 881542 881846 881541 *
U.S. and Canada Canada United Kingdom France Netherlands
10¢ / 25¢ Hanke Dual Optic Coin Acceptor 25¢ / $1 Hanke Dual Optic Coin Acceptor 1£ / 20 Pence Hanke Dual Optic Coin Acceptor 2 / 5 Franc Hanke Dual Optic Coin Acceptor 25¢ / 1 Guilder Hanke Dual Optic Coin Acceptor
Consult factory for coin acceptors not listed.
Telephone: (508) 678-9000
Fax: (508) 678-9447
56
Coin Meter Replacement Parts
MAN0238
Illus. No. 1 2
3 4
Part No. 125541 125540 125500 125501 125502 125503 125504 125506 125507 125508 125510 125515 125516
Qty. 1 1 1 1 1 1 1 1 1 1 1 1 2
American Dryer Corporation
Description 1/60 RPM 24 VAC / 60 Hz Meter Motor 1/30 RPM 24 VAC / 50 Hz Meter Motor 2-Point Cam 3-Point Cam 4-Point Cam 5-Point Cam 6-Point Cam 8-Point Cam 9-Point Cam 10-Point Cam 12-Point Cam Meter Switch “B” with Arm Meter Switch “A” or “C”
88 Currant Road / Fall River, MA 02720-4781
Wire
Oven Assembly
Terminal Lug Bus Bar P/N: Qty Kw Part No. Qty Size Part No. Qty Part No. 121011 Element
Oven Wire
Oven Relay Cat. No. Part No.
460/480
3Ø
3 or 4
824951
6
4
120009
1
#8
882559
1
121010
2
DPA33
131352
24
416
3Ø
3 or 4
826394
6
4
120009
1
#8
882558
1
121010
1
DPA33
131352
24
240
3Ø
3
883557
6
4
120009
1
#6
882556
1
121010
1
DPA63
131369
24
208
3Ø
3 or 4
824915
6
4
120008
1
#4
882553
1
121010
1
DPA73
131376
20
380
3Ø
3 or 4
826243
6
4
120007
1
#8
882558
1
121010
1
DPA33
131352
20
240
1Ø
2
883559
5
4
120009
1
#4
882552
1
121010
2
DPA93
131358
20
208
1Ø
2
883561
5
4
120008
1
#2
883384
1
121010
2
DPA93
131358
18 460/480
3Ø
3 or 4
883560
6
3
120007
1
#8
882559
1
121010
2
DPA33
131352
18
41 6
3Ø
3 or 4
826389
6
3
120007
1
#8
882558
1
121010
1
DPA33
131352
18
240
3Ø
3
883562
6
3
120007
1
#8
882558
1
121010
2
DPA43
131357
18
240
1Ø
2
883558
6
3
120007
1
#4
882552
1
121010
2
DPA73
131376
18
208
3Ø
3 or 4
824914
6
3
120006
1
#6
882556
1
121010
2
DPA53
131359
18
208
1Ø
2
883563
6
3
120006
1
#2
883384
1
121010
2
DPA93
131358
15
380
3Ø
3 or 4
826389
6
3
120007
1
#8
882558
1
121010
1
DPA33
131352
57
Fax: (508) 678-9447
24
Electrical Oven Component Application Chart
Telephone: (508) 678-9000
kW Voltage Phase
58
Additional Parts Available
Part No.
Description
114006 112280 114001 112533 112534 120100 120300 120400 120500 120600 120707 120708 120800 120802 120902 120903 121014 121026 121499 121500 122804 404500 404502 404513
“WARNING - Fire Hazards” Label “Clean Lint Screen” Label “CAUTION - Exhaust/Lint Screen” Label “Phase 5 Coin Program Location Summary” Label “Phase 5 OPL Program Location Summary” Label 3/8” Straight (BX) Connector 3/8” x 45º (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX) Retainer Clip 3/8” Greenfield (BX) (2-Position) Terminal Strip (3-Position) Terminal Strip 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-on Wire Nut 1/4” Insulated (female) Terminal Tab Receptacle Combination 5-1/2” Harness Tie 8” Harness Tie Manometer (Hydro Gauge) for Measuring Gas Pressure Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Wrinkle Blue Brush-In-Cap Bottle Touch-Up Paint
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450342
1 - 05/08/00-25
2 * 09/24/01-25
3 * 10/10/02-25
