Transcript
➀
➂
SHEET-SAV™ PUSH PULL Grip slipsheet and pull load onto platens. Transport load to desired location.
Press Sheet-Sav™ knob button and activate lever to lower foot.
➁
Press Sheet-Sav™ knob button and activate lever to raise foot.
➃ Push load off platens
while retaining slipsheet.
➄ Press Sheet-Sav™ knob
button and activate lever to raise foot, then remove sheet.
Save your slip sheets using a Sheet-SavTM Push/Pull. Slip sheet handling with the added ability to retain and reuse your slip sheets.
APPLICATIONS
OPTIONS
Use the Cascade Sheet-Sav™ Push/Pull to keep your slip sheets in house. This is a popular attachment for manufacturers who handle product on slip sheets within their operation and who transfer product without a slip sheet onto a pallet, into a container, or onto a flatbed truck. Popular for bagged cement, bagged seed and grain, packaged food, dairy products, fruit and produce and corrugated box blank handling.
■
Quick-change hydraulic couplers
■ ■
Hydraulic flow control valve Extended height and width faceplates
■
Extended push strokes
■
Faceplate stop group
■
Optional platen sizes
■
Forks and multiple fork groups
■
Class III mounting (45E only)
FEATURES High production slipsheet handling capabilities ■
High visibility pantograph, gripper jaw and faceplate
■
Adjustable platens
■
4° tilting faceplate
■
Chamfered platen corners and gripper jaw design protects the slipsheet
■
QFM models: Frame mounts between forks (20" wide) for minimum effective thickness (lost load)
Strength and durability in demanding applications ■
High strength, rigid pantograph for safe load packing
■
Protected hydraulics
■
“Cushion” cylinders reduce operating noise
■
Simplified hydraulic circuit
SHEET-SAV™ PUSH PULL 40.0"
2.7"
50.0"
Outside Platen Spacing
39.2"
4"-12" Platen Width
.2"
ET 1.25”
➀ ➀ ➀ ➀
➀ This unit is solenoid equipped for the Sheet-Sav™ function. A two-function hydraulic supply is required. The sideshift and push/pull functions are actuated directly with the auxiliary valves. The Sheet-Sav™ function is actuated by depressing the solenoid button and then actuating the push/pull valve. The control knob with a push button is included.
II Bolt-On II Bolt-On II Bolt-On II Bolt-On
40"-44" 34"-38" 40"-44" 34"-38"
Platen Length 48.0"
QFM Sheet-Sav™
Outside Platen Spacing
QFM Sheet-Sav™
II II II II
31" 31" 31" 31"
40" or 46" 34" or 40" 40" or 46" 34" or 40"
QFM SPACER KIT
INSTALLATION KIT
➂ Spacers required for forks thicker than 1.5". Catalog Order No. SP175 SP180
35E–0.3" 45E–0.4"
ET CGH
➁ This unit is solenoid equipped and may be controlled with a single auxiliary valve on the truck. IMPORTANT: Solenoid voltage must match truck voltage. Please specify truck voltage when ordering. One truck auxiliary valve required, two hydraulic functions (one solenoid). IMPORTANT: QFM™ Push/Pulls must be mounted on standard forks to support the load and the push/pull. Forks up to 1.8" thick and 40" to 46" long may be used. Recommended fork length is 42" with bottom taper. Forks must be spaced 20.5" to 25.5" apart, inside to inside. Model 1.75" forks 1.8" forks
4°
1.4"-1.8" Forks ➂
3.0"
➁ ➁ ➁ ➁
50.0"
CGV
Min. Truck Carriage Width
Catalog Order No.
35E-QPA-Q001 35E-QPA-Q002 45E-QPA-Q001 45E-QPA-Q002
Vertical Center of Gravity
8.2" 8.8" 8.2" 8.8"
39.5"
Mounting Class/ Lower Hook Type
Platen Size (WxL)
18" x 48" 15" x 48" 18" x 48" 15" x 48"
Type
Capacity Lbs. @ 24" Load Center
20.0"
kg
10.1" 9.4" 10.1" 9.4"
Outside Platen Spacing
Platen Width
1,590 1,590 2,045 2,045
9.0" 9.0" 9.0" 9.0"
2.7"
4" or 10"
lbs
633 604 633 604
1,395 1,330 1,395 1,330
IMPORTANT: Solenoid voltage must match truck voltage. Please specify truck voltage when ordering. Two truck auxiliary valves required, three hydraulic functions (one solenoid). Quick-Disconnect mounting also available. Class III mounting available (45E only).
40.0"
3,500 3,500 4,500 4,500
CGV
Vertical Center of Gravity
35E-PAS-A001 35E-PAS-A003 45E-PAS-A001 45E-PAS-A003
Horizontal Center of Gravity
18" x 48" 15" x 48" 18" x 48" 15" x 48"
CGH
Horizontal Center of Gravity
Sheet-Sav Sideshifting Sheet-Sav™ Sideshifting Sheet-Sav™ Sideshifting Sheet-Sav™ Sideshifting
ET
Effective Thickness
1,590 1,590 2,045 2,045
Effective Thickness
lbs ™
kg
Weight
Outside Platen Spacing
Mounting Class/ Lower Hook Type
Catalog Order No.
kg
Weight
3,500 3,500 4,500 4,500
3.0"
CGH
Platen Size (WxL)
Type
Capacity Lbs. @ 24" Load Center lbs
CGV
Platen Length 48.0"
Minimum carriage width non-sideshifting – 28" Minimum carriage width sideshifting – 36"
4°
lbs kg
ET
CGH
CGV
935 905 965 935
9.3" 9.3" 9.3" 9.3"
10.6" 10.0" 11.4" 10.7"
11.4" 11.7" 10.9" 11.4"
425 411 438 425
Class III mounting available (45E only).
Platen Selection 18" x 48" Platens: Recommended for applications where push/pull will not be handling pallets. Provides 40" minimum width slipsheet base. 15" x 48" Platens: Recommended for applications where push/pull will be used to handle pallets. Provides 34" minimum width slipsheet base.
Model PAS QPA
Catalog Order No. 685559 685558
Cascade Corporation • PO Box 20187 • Portland, OR 97294-0187 • 800 CASCADE (227.2233) • Tel 503.669.6257 • Fax 800.693.3768 • Fax 503.669.6367 Cascade Canada Ltd. • 5570 Timberlea Blvd. • Mississaue, Ontario L4W 4M6 • Canada • 800.2272 • Tel 905.629.7777 • Fax 905.629.7785 Cascade is a registered trademark of Cascade Corporation. © Cascade Corporation 2005. All rights reserved.
Form 6010364 12M CG 10/05
www.cascorp.com
