Transcript
6274-001 Installation Instructions
For OSHPD Regulated Installations, please go to www.midmark.com to download the appropriate OSHPD Approval and Installation documents.
INS-6274-001 (Rev. E)
Attention!
6274-001 Installation Instructions INS-6274-001 (Rev. E)
Installation Hardware Tools required:
Parts Included:
Electric Drill with driver extension Phillips head screwdriver/bit 1/2” Drill Bit Punch
(1) Mounting Template (1) Wall Mount Assembly (6) 1/4-20 Threaded Hilti Snaptoggle Heavy-Duty Toggle Bolts (2 extra) (4) 1/4-20 x 2” Long Phillips Drive Pan Head Machine Screws (1) Cable Management Cover (8) Dual Lock Velcro Squares (1) Mouse House
Mounting Template/Drilling Hole Preparation:
1
Place mounting template on wall (See Fig. A). Note: Choose desired height for keyboard bracket, ideally 41”-44” for a standing position. 29 1/2” - 32 1/2” for a sitting position.
Toggler Bolt Installation Instructions:
3
Caution Properinstallationoftoggleboltsrequired toprovidesecurewallmounting.Minimum drywallthicknesstobe½”.
a.
(1/2” Hole)
b.
Hold ends of straps together between thumb & forefinger and pull toward you until channel rests behind wall. Rachet cap along straps with other hand until flange of cap is flush with wall.
c.
Place thumb between straps at wall. Push thumb side to side, snapping off straps level with flange of cap.
Fig. A Toggler Bolt Installation Preparation:
2
Drill 1/2” size hole. Hold metal channel flat alongside plastic straps and slide channel through the hole. Minimum clearance beind wall: only 1 7/8”
a. Using punch to locate holes in wall. b. Make sure that drill bit point is centered with cross-pattern of hole location. c. Install Toggler Bolts
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
6274-001 Installation Instructions INS-6274-001 (Rev. E) Mounting to Wall:
4
Keyboard Attachment:
Secure with (4) 1/4-20 x 2” Long Phillips Drive Pan Head Machine Screws.
5
a. Attach (8) Velcro squares together. Peel off film from one side and adhere (4) Velcro Squares to the underside of keyboard. b. Peel off film from the other side squares and attached to keyboard platform (See FIG A).
Fig. A
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
