Transcript
3 ports
PROPORTIONAL SOLENOID VALVES
Series
602
G1/4 to G1 tapped body FEATURES • Together with an amplifier plug and a separate pressure detector, this valve is the equivalent to a SENTRONIC proportional valve. • This modular arrangement allows the components to be built into specific regulation systems. Installation of the proportional valve allows a higher ambient temperature range than the SENTRONIC proportional valve.
GENERAL Fluid Air or neutral gas, filtered at 50 µm, lubricated or not Maximum allowable pressure (MAP) 8 or 16 bar (G1/4) 12 bar (G1/2 - G1) Control range 0-6 or 0-16 bar (G1/4) 0-12 bar (G1/2) - 0-10 bar (G1) Fluid temperature -10°C to +60°C Ambient temperature -10°C to +60°C Flow (Qv at 6 bar) 700 to 5600 l/min (ANR)
C
CONSTRUCTION Body Internal parts Seals
anodised aluminium stainless steel and brass NBR (nitrile)
ELECTRICAL CHARACTERISTICS nominal diameter DN (mm) 6 12 20
stabilised voltage (1)
max. power (W) 24 34 44
24 V = +/-10%
max. current (mA) 1000 1400 1800
insulation class
degree of protection
electrical connection
F
IP 65
spade plug size 30 connector, ISO4400/EN175301-803, form A, rotatable by 90°
(1) Max. ripple: 10 %
SPECIFICATIONS flow
Ø connection
Ø orifice (mm)
Kv coefficient
at 6 bar (l/min) (ANR)
G 1/4
6
10
700
G 1/2 G1
12 20
20 80
1400 5600
control range (bar) 0-6 0 - 16 0 - 12 0 - 10
maximum allowable pressure (MAP) (bar) 8 16 12 12
catalogue number 60200002 (2) 60200001 60200004 60200007
(2) Low hysteresis version
catalogue number: 460594
DIMENSIONS (mm), WEIGHT (kg)
40 A
2
A 35
B 115
C 52
D 43
2 1
D C
Coil rotatable by 90°
Ø nominal 6
3
E
1
H
Connector rotatable by 90° (3 pins + earth) ISO 4400 / EN 175301-803, form A
F
J
Amplifier plug (see "Accessories" page)
G
N P B
• Rear mounting by 2 tapped holes Ø G depth S • Front mounting by 2 holes Ø R
3
I
00248GB-2005/R01 Availability, design and specifications are subject to change without notice. All rights reserved.
L M
E 10
F 20
G M5
R
OPTIONS: FPM seals -
K
H 16
I 11
12
45
151
70
57,5
12
28
M6
22,5
15
20
60
188
96
79
15
33
M8
30,5
20
J 34
K L G1/4 107
48,5 G1/2 119 60
G1
-
M 82
N 123
P 153
R 4
S 10
weight 0,700
96
151
190
4,5
10
1,500
116
184
-
6,5
15
3,300
All leaflets are available on: www.asconumatics.eu
Pneutrol International Ltd, 5 Caulside Drive, Antrim, Northern Ireland, BT41 2DU www.pneutrolvalves.com,
[email protected], Tel: +44 (0) 28 9448 1800
P300-7
