Transcript
Clock Audio http://www.clockaudio.com/
MODEL : SM 80S-RF-PTT
DESCRIPTION Through table microphone Shock Mount with phantom power adaptor and push to talk switch. Through table shock absorbing microphone mount All-metal construction A hinged flap allows the unit to sit almost flush to a table. Simple push / click fit allows a microphone to be removed quickly and easily so that the table can be used for other matters Suitable for use on Clockaudio C3100 microphone. Supplied with phantom power adaptor Termination Input - 3 pin TA 3MB Male Tini Q Connector and Output – 3 PinMale XLR A push to talk switch is provided. Bi-colur LED @ 30mA Finish: Satin Nickel For 'Glossary of Terms' Click Here Technical Dimensions
Height Above Surface: 3mm (0.18") Diameter: 58mm (2.28") Body Diameter: 51mm (2") Body Below Surface - XLR version: 61mm (2.4")
Application
Low profile hinged flap through table microphone mount.
Termination
Input - 3 pin TA 3MB Male Tini Q Connector and Output – 3 PinMale XLR
Finish
Satin Nickel
Architects and engineer specifications
The through table shock absorbing microphone mount is of an all metal construction. A hinged flap allows the unit to sit almost flush to a table once the microphone has been disconnected, allowing the table to be used for other matters. It is supplied with a dedicated phantom power adaptor designed to power the C 3100 miniature gooseneck microphones terminated with Tini Q (mini XLR) 3 pin connectors. The Phantom power
1/2
Clock Audio http://www.clockaudio.com/ Technical adaptor accepts 9 to 48 volts DC and has an impedance of 200 Ohms. The phantom power adaptor includes filters, which will eliminate all GSM frequencies from 900-1200 MHz and is terminated with a male 3 pin XLR. A push to talk switch and a Bi-colour LED indicator is fitted to the base, LED accepting 5, 12 or 24Vdc @ 30mA. Finish: Satin Nickel Overall diameter of 58mm/ 2.28”.
2/2 Powered by TCPDF (www.tcpdf.org)
