Transcript
Product Specifications RFA810 RFA810--16S06 16S06--95M
HELIAX® FiberFeed® Hybrid Cable Assembly, 8 power conductors, 16-fiber, black jacket, aluminum armor, 95 m
Product Classification Portfolio
CommScope®
Brand
FiberFeed® |
Product Series
RFA
Product Type
Hybrid cable assembly
Regional Availability
Asia
|
HELIAX®
Australia/New Zealand
|
EMEA
|
Latin America
|
North America
Construction Materials Fiber Type
Bend insensitive singlemode fiber (G.657.A2)
Total Fibers, quantity
16
Jacket Color
Black
Dimensions Cord Length
95.00 m
|
311.68 ft
Environmental Specifications Operating Temperature
-40 °C to +75 °C (-40 °F to +167 °F)
General Specifications Conductors, quantity
8
Construction Type
Hybrid standard trunk
Center Conductor Gauge
10 AWG
Interface Body Style, connector A
Straight
Interface Body Style, connector B
Straight
Interface Feature, connector A
Standard
Interface Feature, connector B
Standard
Interface, connector A
DLC
Interface, connector B
DLC
Minimum Bend Radius, furcation
30.0 mm | 1.2 in
Optical Performance Insertion Loss, maximum
0.50 dB
Insertion Loss, maximum note
Insertion loss is measured at 1310, 1385, and 1550 MHz
Insertion Loss, maximum, connector A and B 0.50 dB
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 12, 2017
page 1 of 5 October 16, 2017
Product Specifications RFA810 RFA810--16S06 16S06--95M
Included Products 760179960 | HFC-16SM-810-APE aluminum armor l
(Product Component—not orderable)
— HELIAX® FiberFeed® Hybrid Cable with
CS-8G-MP (Product Component—not orderable) — Enhanced Low Macrobending, Zero Water Peak, Dispersion-Unshifted Singlemode Fiber (ITU-T G.657.A2, B2)
* Footnotes Insertion Loss, maximum, connector A and B Insertion loss is measured at a room temp of +20°C (+68°F)
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 12, 2017
page 2 of 5 October 16, 2017
Product Specifications 760179960 | HFC HFC--16SM 16SM--810 810--APE
HELIAX® FiberFeed® Hybrid Cable with aluminum armor
Representative Image
General Specifications Conductor Gauge
10 AWG
Conductors, quantity
8
Construction Type
Armored
Application
Remote radio head
Brand
HELIAX® FiberFeed®
Cable Type
Wireless feeder
Inner Shield (Tape) Material
Corrugated aluminum
Outer Shield (Tape) Material
PE
Ripcord Material
Para-aramid synthetic fiber
Strength Member
Glass reinforced plastic rod
Water Blocking Method
Water blocking tape(s)
|
Water blocking threads
Construction Materials Fiber Type Solution
Bend insensitive singlemode fiber (G.657.A2/B2)
Total Fiber Count
16
Armor Type
Corrugated aluminum
Fiber Type
Bend insensitive singlemode fiber (G.657.A2/B2)
Fiber Type, quantity
16
Fibers per Subunit, quantity
2
Jacket Color
Black
Electrical Specifications dc Resistance, maximum
1.040 ohms/kft
|
3.409 ohms/km
dc Resistance Note
Maximum value based on a standard condition of 20 °C (68 °F)
Dimensions ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 3 of 5 October 16, 2017
Product Specifications 760179960 | HFC 760179960 | HFC--16SM 16SM--810 810--APE
Buffer Tube/Subunit Diameter
3.60 mm | 0.14 in
Cable Weight
750.0 kg/km
|
Diameter Over Jacket
23.50 mm
|
0.93 in
Filler, quantity
1
Subunit, quantity
8
|
18.5 in
510.0 lb/kft
Physical Specifications Minimum Bend Radius, multiple bends, loaded
469.9 mm
Minimum Bend Radius, multiple bends, unloaded 236.2 mm | 9.3 in Minimum Bend Radius, single bend, unloaded
152.4 mm | 6.0 in
Tensile Load, long term, maximum
801 N
Tensile Load, short term, maximum
2669 N
|
180 lbf |
600 lbf
Environmental Specifications Environmental Space
Wireless installation
Installation Temperature
-30 °C to +70 °C (-22 °F to +158 °F)
Operating Temperature
-40 °C to +80 °C (-40 °F to +176 °F)
Storage Temperature
-40 °C to +80 °C (-40 °F to +176 °F)
Mechanical Test Specifications Compression
22 N/mm | 126 lb/in
Compression Test Method
FOTP-41
Flex Test Method
FOTP-104
Impact
2.94 N-m | 2.17 ft lb
Impact Test Method
FOTP-25
Twist
10 cycles
Twist Test Method
FOTP-85
Qualification Specifications Cable Qualification Standards
ANSI/ICEA S-87-640
|
Telcordia GR-20
|
Telcordia GR-409
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
Included Products CS-8G-MP (Product Component—not orderable) Singlemode Fiber (ITU-T G.657.A2, B2)
— Enhanced Low Macrobending, Zero Water Peak, Dispersion-Unshifted
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 4 of 5 October 16, 2017
Product Specifications 760179960 | HFC 760179960 | HFC--16SM 16SM--810 810--APE
* Footnotes Operating Temperature Specification applicable to non-terminated bulk fiber cable
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 5 of 5 October 16, 2017
