Preview only show first 10 pages with watermark. For full document please download

Simplex 4100+media+fiber+optic+card

   EMBED

Share

Transcript

sBSimplex 4602/4020/4100+/4120 Network Installing the Media Fiber Optic Card You must follow the instructions below to avoid damage to fiber optic cables during installation of the Fiber Optic Media Cards. The position of the plastic mounting screw is also shown. The Cable Clamps and Plastic Mounting screw are part of shipping group (Part No. 748-318). NOTE: To accomplish the following steps, you must remove power from the unit and open the Display Door of the Master Controller. 1. When attaching the Network Modular PC Board hardware, you must mount the plastic screw in the lower left corner of the board. See the illustration below. This placement avoids a short with the optic cable connectors. 2. Attach the two cable clamps (adhesive back) where shown in the illustration below. CAUTION: To avoid damage to the fiber optic cables, use a gradual radius when bending the cables. Do not crimp the cables. 3. Feed the cables through the clamps and attach to Media Fiber Optic Card. See the illustration below. ,Cable Clamp city. (2) Plastic Screw Is Open Fiber Optic Cables 0 1994 Simplex Time Recorder Co.. Gardner. MA 014414001 U.S.A. Technical Manuals Online! - http://www.tech-man.com FA4-21-409 (574-067) Ed 11 94 Technical Manuals Online! - http://www.tech-man.com