Transcript
Single Board ACTI-777
ROBO-668
ROBO-678
The Most Advanced PICMG SBC Based on Dual Intel® Pentium III Processor with Intel Graphics and Ethernet Solutions
Advanced PICMG SBC with AGP VGA and Intel® Fast Ethernet Solution, Based on the Dual Pentium III or Celeron™ Processor
High-integrated Dual Fast Ethernet SBC, Based on the Intel® Pentium III or Celeron™ Processor
Support dual Socket 370 Pentium ® III or Celeron™ processor with bus clock up to 100/66MHz ◆ Support up to 1GB of SDRAM with ECC function ◆ C&T 69K AGP VGA display up to 2MB VRAM ◆ Proprietary PCI connector for expansion (optional daughter board provided such as Ultra 160 SCSI) ◆ One built-in DOC socket for flash memory disk ◆ Fully support ATX function with WOL, Modem-Ring On, K/B & Mouse wake-up ◆ External power connectors to enhance power driving for heavy loading of dual CPU modules applications ◆ ISA64 driving capability
Support Socket 370 Pentium ® III or Celeron™ processor with front site bus up to 133MHz ◆ Support maximum PC100/133 SDRAM memory up to 512MB ◆ On-board dual 10/100 Base-T Ethernet ◆ Integrated 3D graphic controller (DVMT, 4Mbyte display cache) ◆ Support two DMA33/66/100 IDE and ISA64 driving capability ◆ Proprietary PCI connector for expansion (optional daughter board provided such as Ultra 160 SCSI) ◆ Support ATX function with WOL, Modem-Ring On, K/B & Mouse wake-up ◆ Hardware Monitoring & Watchdog Timer for system protection
Support dual Socket 370 Pentium ® III processor with 100MHz FSB up to 850MHz ◆ Support two channel RDRAM memory up to 2GB ◆ Support C&T 69000 chip ◆ On board Intel ® 82559 10/100 Base-T Ethernet ◆ Support Ultra DMA33/66 IDE mode ◆ Fully PCI Bus spec V2.1 compliant ◆ Full-size all-in-one SBC with PICMG 2.0 compliant ◆ Reserve space around IDE interface connector to fit DOM (Disk-On-Module) ◆ Support ATX function with WOL, Modem-Ring On, K/B and mouse wake-up ◆ ISA64 driving capability ◆
◆
ROBO-U160
ROBO-N100
Ultra 160 SCSI Extension Module with Portwell OmniPCI™ Connection Interface
Fast Ethernet Extension Module with Portwell OmniPCI™ Connection Interface
Adaptec AIC7892 SCSI Ultra 160 SCSI controller Compact sized Proprietary PCI connector for piggy back (board to board) connection ◆ 68-pin SCSI connector located at PCBA component side ◆ Support SCSI Ultra160/m ◆ Single channel ◆ With 68-pin LVDS SCSI cable ◆ Dimension: 77(L) x 52(W) mm
◆ ◆
◆
http://developer.intel.com/ platforms/applied/acpp/providers.htm
◆
Intel® 82559 fast Ethernet controller Proprietary PCI connector for piggy back (Board to Board) connection ◆ Compact sized ◆ One Ethernet RJ-45 cable ◆ Support IEEE 802.3 ◆ Auto-negotiation algorithm of full-duplex and half-duplex operation for 10Mb/s and 100Mb/s (NWAY) ◆ Dimension: 77(L) x 52(W) mm ◆
◆
Portwell OmniPCI™ extension module make the additional function in minutes!
ROBO-658
ROBO-608
ROBO-598
World's First Fully Integrated SBC with AGP Display, 10/100 Base-T Ethernet and Ultra 160 SCSI Functions
Best Cost/Performance Socket 370 Type PICMG SBC with PCI VGA/Panel Display
Best Performance SBC with AGP Display and Flash Disk, Based on the Pentium® Processor
Support Socket 370 type Intel ® Pentium III or Celeron™ processors with bus clock up to 133MHz ◆ Support up to 512MB (max.) of SDRAM ◆ Intel® 82559 10/100 Base-T Ethernet ◆ On-board Adaptec 7892 Ultra 160 SCSI ◆ Support 2D/3D graphics display with 4 MB VRAM ◆ Ultra DMA33/66 IDE mode and ISA64 driving capability ◆ Reserve space around IDE interface connector to fit DOM (Disk-On-Module) ◆ Support 4MB Video display cache memory ◆
Intel® 440BX AGPset supports 66/100 MHz FSB for Socket 370 Pentium III processors up to 850MHz or Celeron™ processors up to 600MHz ◆ Support up to 1GB of registered SDRAM with ECC function ◆ One DOC socket supports up to 288MB of flash memory disk ◆ PC/104 connector and high ISA-bus driving capability ◆ Support C&T 69K PCIVGA display with optional panel solution ◆ Adopt DS1687 RTC to support real Y2K compliance ◆ Support system overheat protection and ATX power control ◆
Support Pentium ® compatible processors up to 550MHz Equipped with 512KB cache memory ◆ Three DIMM SDRAM sockets support up to 768MB ◆ Built-in ATI Rage Pro AGP display and 4/8MB VRAM for high performance display ◆ Support high ISA driving capability ◆ Support ATX power control and CPU overheat protection ◆ One socket for DiskOnChip supports flash memory disk up to 288MB ◆ Built-in RTC and configurable WDT (Watchdog Timer)
◆
◆
Computer ROBO-615
ROBO-605
ROBO-505
All-in-one PICMG Half-size PCI Single Board Computer
World's First Half-size SBC, Based on the Intel® Pentium III or Celeron™ Processor
The Compact SBC with Panel/VGA Display & 10/100 Base-T Ethernet, Based on the Pentium ® Processor
Socket 370, flexible design for Intel ® Pentium III or Celeron™ Processor ◆ Support PC100/PC133 SDRAM ◆ Maximum SDRAM memory up to 256MB (one DIMM socket) ◆ Intel® 815E embedded graphic controller (Direct AGP, DVMT 4MB display cache) ◆ Award BIOS 4Mbit flash ROM ◆ Intel® 815E embedded fast ethernet ◆ Support 2 ATA/100 IDE channel ◆ AC97 audio on board ◆ Half length All-in-one SBC, PCI form factor (PICMG compliant)
Support Socket 370 processor with PCI VGA/panel display Intel® 440BX AGPset supports 66MHz FSB ◆ Support Socket 370 Pentium ® III or Celeron™ processor ◆ All-in-one half-size SBC with ISA-bus ◆ Support up to 256MB (max.) of 3.3V SDRAM with ECC function ◆ Support M-Systems' flash memory disk up to 288MB ◆ Support C&T 69K PCI VGA display with optional panel solution ◆ Support system overheat protection and real H/W Y2K compliant RTC
Support Intel ® Pentium (P55C) processor up to 233MHz; compatible processors up to 333MHz ◆ Adopt Intel ® 430TX chipset ◆ One DIMM SDRAM socket supports up to 128MB of SDRAM ◆ On-board 512KB cache memory ◆ Support M-Systems' flash memory disk up to 288MB ◆ On-board Realtek 8139A 10/100 Base-T Ethernet ◆ Supported four COM ports ◆ 8-layer PCB ◆ Support ISA high driving capability and CPU overheat protection
◆
◆
◆
PCI Series
ISA Series
Support multipleslot Backplane
Support 4, 6, 8 & 14-Slot Backplane
PBP-06P3
PBP-06V4
PBP-02V1X
6-Slot (3xPCI) PICMG Backplane
Vertical 6-Slot (4xPCI) PICMG Backplane
Vertical 2-Slot (1xPCI) PICMG Backplane
▲ Front View
◆ ◆
▼ Rear View
▲ Front View
▼ Rear View
Fit for some node chassis Support ATX type connectors
ROBO-535
ROBO-603
ROBO-503
All-in-one ISA SBC Based on Intel ® Low Power Pentium Processor
Intel® Socket 370 Processor Based 5.25" Embedded Board with Dual view VGA, Dual Fast Ethernet
NS GX1 Processor Based 3.5" Embedded Board with CRT/LCD, Dual Ethernet and Audio
Support Intel ® TX based PICMG half-size ISA SBC with Ethernet/VGA/LCD ◆ Tillamock low power Pentium 266 on board ◆ Support maximum PC100 SDRAM memory up to 256MB ◆ ATI Mobility MAGP graphic controller 4Mbyte display ◆ Intel® 82559ER fast Ethernet controller ◆ Proprietary PCI connector for expansion (optional daughter board provided such as Ultra 160 SCSI)
◆
◆
Support Intel ® FC-PGA Pentium III or Celeron™ processor SMI AGP 2X Lynx3D TM SM 720 integrated 2D/3D graphics and multimedia accelerator with embedded 4MB SGRAM (Optional 8MB) ◆ Dual Intel ® 82559ER 100Base-TX fast Ethernet ◆ Support Type II compact flash disk ◆ 32-bit PCI slot for expansion ◆ Dimension: 203(L) x 145(W) mm ◆
◆
3.5" FDD SubCompact form factor Support NS Geode GX1 BGA CPUs ◆ Support CRT and 18-bit TFT panels ◆ Support compact flash disk ◆ Onboard dual Intel ® 82559ER 100Base-TX fast Ethernet controllers ◆ 5V only operation ◆ Dimension: 150(L) x 100(W) mm ◆
◆
* Intel, Pentium, Pentium II and Pentium III are registered trademarks and Celeron and Xeon are trademarks of Intel corporation.
Industrial PRC-1173
PRC-1234
Ultra Slim 19" 1U Rack-mount Chassis
Compact 19" 1U Industrial Rack-mount Chassis for ATX M/B 1U PCI expansion slot available For ATX motherboard (recommend Tyan 2420 and Gigabyte GA-6VXDR2) ◆ 2x5.25" HDD, 1 NB CD-ROM & 1 standard 3.5" FDD ◆ Compact and slim design with stylish protective cover ◆ One blower (97x95x33 mm) and two fans (40x40x20 mm) ◆ HDD, LAN and power LED indicators ◆ 250W power supply ◆ Dimension: 482.6(W) x 600(D) x 44(H) mm
Smart drive kit drive can hold notebook type CD-ROM, FDD and 2.5"/3.5" HDD drives ◆ Detachable backplane holder for easy installation ◆ Power On/Off switch on the rear side and a rest switch inside the lockable door ◆ Four 4cm ball-bearing cooling fans for better ventilation ◆ One slot available, either ISA or PCI ◆ Adopt 150W slim type power supply ◆ Dimension: 482.6(W) x 438(D) x 44(H) mm
◆
◆
PRC-2193/2193P
PNC-6162/PRC-4164
IRC-305
Super Compact 19" 2U Rack-mount PC Chassis
Magic 6-slot Node Chassis
Advanced 19" 2U Rack-mount PC Chassis
1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays For ATX M/B(2193) or SBC(2193P) card ◆ Detachable backplane holder for easy installation ◆ Dual 8cm ball-bearing cooling fans for better ventilation ◆ One reset switch and On/Off switch inside the front panel for secure access ◆ Four PCI slots for expansion ◆ PS/2 redundant power supply installable ◆ Dimension: 482.6(W) x 495(D) x 88(H) mm ◆
◆
Magic design for wall-mount, desk-top and Rack-mount application ◆ Rugged steel node chassis suitable for harsh environment ◆ Built-in 12cm dual ball-bearing fan for better ventilation ◆ Built-in micro-ATX type power supply ◆ Support one external 5.25" and one internal 3.5" disk drives ◆ Optional kits to combine two PNC-6162 for the Rack-mount application (PRC-4164) ◆ Dimension: PNC-6162: 220(W) x 407(D) x 160(H) mm PRC-4164: 482.6(W) x 407(D) x 177(H) mm ◆
1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays Detachable card cage for easy installation Dual 8cm ball-bearing cooling fans for better ventilation ◆ One touch-free reset switch and On/Off switch protection cap for secure access ◆ One K/B connector cap included ◆ Field replaceable PS/2 PSU applicable ◆ PS/2 redundant PSU installable ◆ Dimension: 482.6(W) x 430.6(D) x 88(H) mm ◆
◆
◆
RPC-500NE
RPC-520
RDA-209
The Most Cost-effective 19" 4U Rack-mount PCChassis
19" 20-slot 4U Industrial Rack-mount PC Chassis
19" 4U 9-drive Rack-mount Disk Array Chassis
Three 5.25" and two 3.5" drive bays for RAID 0, 1, 5 & CD-ROM Two ball-bearing cooling fans for better ventilation ◆ Traditional Rack-mount handles ◆ Dual card retainer positions and one K/B connector cap included ◆ One modularized function panel for single & dual systems ◆ ATX M/B applicable, especially for big-AT size M/B ◆ PS/2 redundant power supply installable ◆ Dimension: 482.6(W) x 450(D) x 177(H) mm
◆
◆
Power On/Off switch with LED indicator and a reset switch inside the lockable door ◆ Three cooling fans and easily installed drive bracket with shock-resistant cushion and well-conductive rubber ◆ Removable disk drive bracket for 5 devices (3.5"x3, 5.25"x2) ◆ Support 20-slot ISA, 19-slot PICMG ◆ Safety-approved 450W ATX PSU installed ◆ Dimension: 482(W) x 638(D) x 177(H) mm ◆
The most compact size to fit 9 disk drives in a 4U chassis Three horizontal drive bays for some special devices, such as RAID controller and CD-ROM ◆ 450W redundant and standard PS/2 power supply optional ◆ Two cooling fans for better ventilation ◆ Only 4U in height, suitable for communication node or rack serv ◆ Easy for system installation and maintenance ◆ Dimension: 482.6(W) x 450(D) x 177(H) mm
◆ ◆
PRC-520FT
RPC-600FT
RPC-800
19" 4U Rack-mount FTS Chassis with 6 Drive Bays
19" 4U Rack-mount FTS Chassis with 9 Drive Bays
19" 4U Industrial Rack-mount PC Chassis for 14 Fulllength Cards
Fault Tolerant Server (FTS) Chassis meets EIA-RS310C industrial standard ◆ Six 5.25" drive bays for RAID & CD-ROM ◆ Three 12cm ball-bearing cooling fans for better ventilation ◆ Modularized back panel for 20-slot Backplane ◆ Frant swappable PS/2 type redundant power supply ◆ Dimension: 482.6(W) x 638(D) x 177(H) mm
◆
◆
FTS Chassis meets EIA-RS310C industrial standard Nine 5.25" drive bays for RAID & CD-ROM ◆ Three 12cm ball-bearing cooling fans for better ventilation ◆ Support dual system PICMG backplane, 14-slot PICMG backplane or ATX M/B ◆ Both PS/2 & PS/2 type Hot-swap redundant PSU available ◆ Dimension: 482.6(W) x 638(D) x 177(H) mm ◆
◆
Power On/Off switch with LED indicator and a reset switch inside the lockable door ◆ Two cooling fans generate positive air for better ventilation ◆ Specially designed for 14 full-length cards ◆ Support 14-slot ISA and various PICMG Backplane ◆ Many options of PSU: Safety-approved 380W Auto-range PS/2 PSU, 48V DC/DC converter and PS/2 type redundant PSU ◆ Dimension: 482.6(W) x 450.8(D) x 177(H) mm ◆
Chassis EZDRV-300NCF
IRC-304S
5.25" Compact Drive Set for Notebook Type CD-ROM, FDD & HDD
Advanced 4-Slot Node Chassis with NB CD-ROM, FDD, HDD
All-in-one drive set can hold notebook type CD-ROM, FDD and HDD drives within the standard 5.25" drive bay ◆ A replaceable drive cover provides more flexibility to install any device ◆ Reserve one LED for internal HDD ◆ The new design to support DVD-ROM is also available ◆ Dimension: 149(W) x 163(D) x 43(H) mm ◆
Support 1xCD-ROM, 1xFDD and 1xHDD (all NB type) drive bays Vertical or horizontal mounted applicable ◆ One12cm ball-bearing cooling fan for better ventilation ◆ One touch-free reset switch and one On/Off switch protection cap for secure access ◆ Built-in SNP-9F40 65W power supply ◆ Dimension: 172(W) x 256.7(D) x 172(H) mm ◆
◆
Patented
IRC-306
IRC-306S
IRC-404S
6-Slot Full-sized Node Chassis (Shoebox)
6-Slot Node Chassis with NB CD-ROM, FDD, HDD
6-Slot Node Chassis with NB CD-ROM, FDD, HDD
One external 5.25" and 3.5" drive bays supported and an internal HDD drive bay inside ◆ Vertical or horizontal mounted applicable ◆ Fan direction changeable ◆ One 12cm ball-bearing cooling fan for better ventilation ◆ Dual card retainer positions for better protection from vibration ◆ Field replaceable PS/2 PSU & PS/2 redundant PSU applicable ◆ Dimension: 260(W) x 408(D) x 172(H) mm ◆
Support one 5.25" drive bay for EZDRV-300 or other device Vertical or horizontal mounted applicable Fan direction changeable ◆ One 12cm ball-bearing cooling fan for better ventilation ◆ One K/B connector cap included ◆ One built-in touch-free reset switch and one On/Off switch protection cap for secure ◆ Built-in 130W power supply ◆ Dimension: 172(W) x 256.7(D) x 194(H) mm ◆
◆
◆
4-slot ISA-Bus passive backplane Support most half-size CPU Card Reserved space for internal 2.5" HDD ◆ Design with no fans needed ◆ One replaceable filter inside the chassis ◆ HDD & Power LED indicators ◆ One rest and power On/Off switch ◆ 65 Watt power supply ◆ Dimension: 110(W) x 218(D) x 195(H) mm ◆
◆
◆
IRC-750
IRC-850
IRC-860
19" 5U Height Rack-mount CTI Chassis with 6 Drive Bays
19" 5U Height Rack-mount CTI Chassis with 10 Drive Bays
19" 6U Height Rack-mount CTI Chassis
◆
4x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drive bays for RAID Dual 12cm Hot-swap ball-bearing cooling fans for better ventilation ◆ Dual card retainer positions ◆ Modularized function panel for single & dual systems ◆ ATX M/B applicable, especially for big-AT size M/B ◆ PS/2 redundant power supply installable ◆ Dimension: 482.6(W) x 495.3(D) x 221(H) mm
◆
◆
◆
8x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drive bays for RAID Detachable card cage for easy installation ◆ Hot-swap cooling fans for easy replacement ◆ Modularized function panel for single, dual & quad systems ◆ Modularized back panel, for 20-slot BP, Baby-AT & ATX M/B ◆ 800W (600W+200W) redundant ATX PSU installable ◆ Dimension: 482.6(W) x 673(D) x 220(H) mm
IRC-215N/PIK-215A
IRC-210N/PIK-210A
PRA-2182
19" 1U Rack-mount Keyboard Drawer with Keyboard & Trackball
19" 1U Rack-mount Keyboard Drawer with 101-Key Keyboard
19" 2U Height Rack-mount Keyboard Drawer with 12.1" TFT Display
▲ IRC-215N
▲ IRC-210N
▼ PIA-215A
▼ PIK-210A
Smart and compact design for Rack-mount application 1U (1.75") height to save space ◆ Equipped with 101-key keyboard and trackball ◆ Dimension: 482(W) x 333(D) x 44(H) mm
Smart and compact design for Rack-mount application 1U (1.75") in height to save space ◆ Equipped with 101-key keyboard ◆ Dimension: 482.8(W) x 333(D) x 44(H) mm
◆ ◆
4x5.25"+2x3.5" or 2x5.25"+6x3.5" drive bays for RAID & CD-ROM Three 12cm ball-bearing cooling fans for better ventilation ◆ New Rack-mount handles ◆ Detachable card cage for easy installation ◆ Modularized function panel for single, dual & quad systems ◆ Single PS/2 power supply & dual PS/2 400W+400W redundant power supply installable ◆ Dimension: 482.6(W) x 495.3(D) x 266(H) mm ◆
◆
◆
◆
Smart and compact design for Rack-mount application 2U (3.5") height to save space ◆ 108-keyboard with integrated GildePoint touch pad. Key pad. ◆ Support VGA connector for rack-mount PC ◆ Built-in 12.1" TFT display ◆ Dimension: 482(W) x 447(D) x 87.9(H) mm ◆
◆
Industrial Pow ORION-2004
ORION-2003
The World's First Quad. Load Sharing (N+1) Hot-Swap Power Supply
600W Load Sharing (N+1) Hot-Swap PSU
The world's first compact and powerful redundant power set ◆ Designed for fault-tolerant computers ◆ Suitable for CTI applications ◆ Four load-sharing redundant modules provide total 800W power output (600W output when one fails) ◆ Support ATX type power input connectors ◆ Output: +5V@60A, +3.3V@48A, +12V@24A, -5V@1A, -12V@1A ◆ Dimension: 100(W) x 210(D) x 214(H) mm ◆
Suitable for 4U chassis front loading design Three load-sharing redundant modules provide 600W power output (400W output when one fails) ◆ True N+1 load-sharing and Hot-swappable design ◆ Support ATX type power connector ◆ Output: +5V@40A, +3.3V@32A, +12V@14A, -12V@1A, -5V@1A ◆ Dimension: 100(W) x 210(D) x170(H) mm
◆
◆
Leading ORION-4005/3005
ORION-3002
ORION-2253
400W+400W/300W+300W True Load-Sharing N+1 Redundant Power Supply
The 300W PS/2 Type Redundant Power Supply
Slim Type of 230W Redundant Power Supply
The world's most compact PS/2 type redundant power supply Two load-sharing redundant modules provide total 600W output ◆ Each module has its own fan to expel the heat and is more reliable ◆ Output: +5V@30A, +12V@14A, +3.3V@15A,
[email protected], -12V@1A ◆ AT & ATX power connectors optional ◆ Dimension: 150(W) x 175(D) x 86(H) mm
The most compact redundant power supply for 2U chassis Two load-sharing redundant modules provide total 260W outpu ◆ Each module has its own fan to expel the heat and is more reliable ◆ 3 N+1 PS/2 type modules available ◆ Output: +5V@45A, +12V@25A, +3.3V@25A, -5V@1A, -12V@2A ◆ Dimension: 150(W) x 181(D) x 86(H) mm
Meet ATX 2.01 standards Two 400W/300W hot-swap redundant modules Provide 1A for stand-by +5V ◆ +5V, +12V, +3.3V output with OVP design ◆ Output: 4005H: +5V@50A, +12V@15A, +3.3V@30A,
[email protected],
[email protected] 3005H: +5V@30A, +12V@15A, +3.3V@12A,
[email protected],
[email protected] ◆ Dimension: 353(W) x 201(D) x 105(H) mm ◆
◆
◆
◆
◆
◆
◆
ORION-2302
ORION-250S
ORION-300S
Slim Type of 230W Redundant Power Supply
Slim Type of 150W ATX Power Supply
Slim Type of 300W ATX Power Supply
The most compact redundant power supply for 2U chassis Two load-sharing redundant modules provide total 260W output ◆ Each module has its own fan to expel the heat and is more reliable ◆ Output: +5V@25A, +12V@13A, +3.3V@15A,
[email protected], -12V@1A ◆ Dimension: 108(W) x 181(D) x 86(H) mm
40.5mm high, the best solution for 1U chassis Support ATX or AT type connectors ◆ 90~132V, 180~260V auto range input ◆ Output: +5V@30A, +12V@10A, +3.3V@15A,
[email protected], -12V@1A ◆ Dimension: 100(W) x 190(D) x 40.5(H) mm
◆
◆
◆
◆
ORION-300DX/24/48
BPS-250RDD/48
300W PS/2 Type 24V or -48V DC/DC ATX Power Supply
The world's Most Compact PS/2 Type - 48V DC/DC Redundant PSU
-48V DC input power converter is designed for telecommunication applications ◆ 24V DC input power converter is designed for vehicle applications ◆ Support ATX type connector ◆ Specially provide 2A@ -12V(max.) for CTI application ◆ Output: +5V@25A, +12V@10A, +3.3V@8A, -5V@1A, -12V@1A ◆ Dimension: 150(W) x 140(D) x 86(H) mm
◆
High power output for 2U solution Total power of +5V &+3.3V is 150W ◆ Provide OVP OLP SCP protection ◆ Suitable for 2U chassis ◆ Compact node chassis ◆ Output: +5V@30A; +12V@14A; +3.3V@15A; -12V@1A;
[email protected] ◆ Dimension: 100(W) x 210(D) x 70(H) mm ◆
◆
Two load-sharing redundant modules to provide 450W output Specially provide 1A @ -12V for CTI application -48V DC/DC converter for telecom applications ◆ Swappable fan to get highly security for 100% mission critical applications ◆ Output: +5V@30A, +12V@14A,
[email protected], -12V@1A ◆ Dimension: 150(W) x 140(D) x 86(H) mm ◆
◆
◆
wer Supply ORION-450AX
ORION-330A
450W PS/2 Type ATX Power Supply
Full 330W Single PS/2 Type AT Power Supply with Auto-range Input
Designed to meet the demand of high current support, such as internet servers or disk-array ◆ Auto-rang AC input ◆ +5V, +12V, +3.3V OVP design ◆ One ATX and one P9 connector ◆ Output: 40A@+5V,
[email protected], 17A@+12V, 1.5A@-12V, 0.5A@-5V ◆ Dimension: 150(W) x 140(D) x 86(H) mm ◆
PW-380/250
PW-300ATX
BPS-7004/24/12
Standard 380W/250W PS/2 Type Power Supply
Standard 300W PS/2 Type Power Supply
The Most Compact 70W 24V or 12V DC/DC Power Supply
A typlcal PS/2 AT power supply Provide OVP, OCP, OLP protection Suitable for factory environment ◆ Output: PW-380: 36A@+5V, 16A@+12V, 0.5A@-5V, 0.5A@-12V PW-250: 25A@+5V, 10A@+12V, 0.5A@-5V, 0.5A@-12V ◆ Dimension: 100(W) x 190(D) x 40.5(H) mm ◆
◆ ◆
Good reliability and quality for ATX functionality Provide OVP, OCP, OLP protection Suitable for factory environment ◆ Output: 30A@+5V, 14A@+12V, 22A@+3.3V, 0.3A@-5V, 1A@-12V ◆ Dimension: 150(W) x 140(D) x 86(H) mm
24V DC input power converter is designed for truck applications 12V DC input power converter is designed for mobile applications ◆ All models are slim and high efficient design ◆ Output: 7A@+5V, 2.5A@+12V, 0.3A@-5V, 0.3A@-12V ◆ Dimension: 80.6(W) x 127(D) x 50(H) mm
◆
◆
◆
◆
◆
SNP-9F40
ORION-150AX
ORION-48T
65W Universal Input Open Frame Power Module
Slim Type of 150W ATX Power Supply
-48V DC Power Supply Tester
An open frame PSU used in those compact machine or equipment Application to compact chassis equipment panel PC ◆ Provide OVP, OCP, OLP protection ◆ Output: 4A@+5V, 3A@+12V, 0.3A@-5V, 0.3A@-12V, 1A@-12V ◆ Dimension: 127(W) x 76.2(D) x 36(H) mm ◆
◆
40.5mm height, the best solution for 1U chassis Support ATX or AT type connectors ◆ 90~132V, 180~260V auto range input ◆ Output: 10A@+5V, 6A@+12V, 6A@+3.3V, 0.2A@-5V, 1A@-12V ◆ Dimension: 100(W) x 190(D) x 40.5(H) mm ◆
◆
Intput voltage: 110V/220V -48V DC output for testing equipment ◆ Maximum 300W output ◆ Suitable for DC power supply test ◆ Dimension: 150(W) x 140(D) x 86(H) mm ◆
◆
CABLE-ATX-P8P9
CABLE-EXT-AT
CABLE-EXT-ATX
Cable for ATX to P8/P9 Connectors Converting
Extension Cable for P8/P9 Connectors
Extension Cable for ATX to ATX+P8/P9 Connectors
An extension cable to convert the ATX connector to P8P9 connectors for fitting those old backplane or computer boards ◆ With an extra power on/off cable, it is easy for user to control their system ◆
The most cost effective PSU designed to fir mid-grade server ◆ Auto-rang AC input ◆ Provide OVP, OCP protection ◆ Output: 30A@+5V, 14A@12V, 0.5A@-5V, 1A@-12V, ◆ Dimension: 150(W) x 140(D) x 86(H) mm ◆
◆ ◆
A Y cable to extend one set of P8/P9 connectors into two Important for those backplanes with dual power-in connectors
◆
◆
A special Y cable that extends the ATX connector to ATX and P8/P9 connectors Well-adopted in those high-end systems that need both types of ATX and P8/P9 connectors altogether
Backplane PBP-19AI 19-Slot (18xPCI) Active PICMG Backplane
◆ ◆
Suitable for advanced CTI application Support ATX type connectors
◆ ◆
PBP-19AC
PBP-14AC
PBP-14A7
19-Slot (12xPCI) Active PICMG Backplane
14-Slot (12xPCI) Active PICMG Backplane
14-Slot (7xPCI) Active PICMG Backplane
Suitable for advanced CTI application Support ATX type connectors
PBP-08A7 8-Slot (7xPCI) Active PICMG Backplane
Fit for any desktop chassis Support 7 PCI slots ◆ Support ATX type connectors
Fit for any 14-slot chassis Suitable for advanced CTI application ◆ Support ATX type connectors
◆
Fit for any 14-slot chassis Suitable for advanced CTI application Support ATX type connectors
PBP-18D4
PBP-13D4
20-Slot Quad-System Backplane
18-Slot Dual-System Backplane
13-Slot Dual-System Backplane
Designed for fault-tolerant computing Support ATX type connectors ◆ Fit for any 20-slot chassis
◆
◆
◆ ◆
PBP-20Q3
Designed for fault-tolerant computing Support ATX type connectors ◆ Fit for any 20-slot chassis
◆
◆
◆
◆
◆
PBP-19P4
◆
◆
◆ ◆
Designed for fault-tolerant computing Support ATX type connectors Fit for any 14-slot chassis
PBP-14P4
PBP-13R4
PBP-08P4
19-Slot (4xPCI) PICMG Backplane
14-Slot (4xPCI) PICMG Backplane
13-Slot (4xPCI) PICMG Backplane
8-Slot (4xPCI) PICMG Backplane
Reserved sufficient ISA slots for CTI application ◆ Support ATX type connectors ◆ Fit for any 20-slot chassis
The most popular and reliable PICMG backplane ◆ Support ATX type connectors ◆ Fit for any 14-slot chassis
◆
◆
Special design for full-lengthed PCI cards Support ATX type connectors ◆ Fit for any 14-slot chassis
◆
◆
◆
◆
Fit for some node chassis and desktop case Support ATX type connectors
MAIL ROOM: If the person above is no longer with your organization, please route to Technical Director.
Portwell, Inc
American Portwell Technology, Inc
Portwell Japan Inc.
3F, No. 92, Nei-Hu Rd., Sec. 1, 114 Taipei, Taiwan, R.O.C. Te l : +886-2-27992020 Fax: +886-2-27991010 E-mail:
[email protected] http://www.portwell.com.tw
41380 Christy St. Fremont, CA 94538 Te l : (510)979-0640 Fax: (510)979-0603 E-mail:
[email protected] http://www.portwell.com
〒101-0042 Ueda Build. 7F, 10-2 Kanda higashi matsushita-cho chiyoda-ku Tokyo Japan Te l : +81-3-5298-8071 Fax: +81-3-5298-8072 E-mail:
[email protected] http://www.portwell.co.jp
* All brand names and trademarks are the properties of their respective owners.
* Specifications are subject to change without notice.
PRODUCT GUIDE
Ver. 21D M010131
