Single Fiber Optic Cable - Fitek Photonics Corporation

Transcript

F i Te k P h o t o n i c s C o r p o r a t i o n h t t p ： / / w w w. f i t e k . c o m . t w Tel：886-3-3626789 Fax：886-3-3752589 [email protected] 2-12 Fiber All Dielectric Loose Tube Optical Fiber Cable Feature Applications Fiber Count : 2 ~ 12 for SM & MM Fiber Small nominal cable diameter and bend radius for SM & MM fiber complied with ITU-T standard easy deployment in duck installations G.652D , G655 , G.657A , G651..etc. Intra building Backbones The strength member is made of two Fiberglass Local loop, metro and long -haul Reinforced Plastic (FRP) CCTV , FTTX broadband Network Light duty and easy installation All dielectric structure free of EMI & Thunder and Lighting Cable jacket material : PE or LSZH Comply with Telcordia GR-20-CORE standard Flame Retardant comply with IEC 60332-1 TIA/EIA Cabling Standard 568-B.3 Fiber Specification Singlemode Fiber Type (µm) Multimode 9/125 50/125 62.5/125 OM3-10Gigabit-300M 8.3 50±3 62.5±3 50±3 9.2±0.4@1310nm 10.4±0.5@1550nm - - - Cladding Diameter (µm) 125±1 125±2 125±2 125±2 Coating Diameter (µm) 245±5 245±10 245±10 245±10 Coloring Diameters (µm) 250±15 250±15 250±15 250±15 Core Clad Concentricity(µm) ≤0.5 ≤3.0 ≤3.0 ≤3.0 Cladding Non-Circularity(%) ≤1.0 ≤2.0 ≤2.0 ≤2.0 - - - Core Diameter (µm) Mode Field Diameter (µm) Cable Cutoff Wavelength ≤1260nm Numerical Aperture 0.13 0.200 ± 0.015 0.275 ± 0.015 0.200 ± 0.015 Tensile proof test (Kpsi) 100 100 100 100 2-12 Fiber All Dielectric Loose Tube Optical Fiber Cable Description A central loose tube cable with up to 12 optical fibers for single loose tube. All are color coded for easy identification. (Refer to table in Specifications). The core tube is filled with water block gel to prevent the ingress of water. The central strength member is made of two Fiberglass Reinforced Plastic(FRP) rod.Then encased with a UV resistant black PE or LSZH (low smoke, zero halogen) jacket. Fiber Coloring Sequence 1 2 3 4 5 6 7 8 9 10 11 12 Blue Orange Green Brown Slate White Red Black Yellow Violet Pink Aqua Cable Specification Fiber Count Core Tube Diameter , mm Cable Outside Diameter, mm Cable Weight, kg/km Cable Jacketing Materials 2 ~12Fiber 3.0 7.0 44kg/km Polyethylene(PE) or LSZH 9/125 50/125 62.5/125 OM3-10Gigabit-300M 1310/1550 850/1300 850/1300 850/1300 Maximum Attenuation (dB/km) 0.4/0.35 3.5/1.5 3.5/1.5 3.5/1.5 Typical Attenuation (dB/km) 0.4/0.3 3.0/1.0 3.0/1.0 3.0/1.0 N/A 500/500 160/500 1500/500 Fiber Type Attenuation typical (nm) Minimum Bandwidth (MHz‧km) Mechanical Properties Standard Maximum Tensile Load - Loaded (N) 2700N Maximum Tensile Load - Unloaded (N) 1500N IEC 60794-1-2 E1 Min. bend radius installed (mm) 20 x cable O.D. Min. bend radius long term (mm) 10 x cable O.D. Storage Temperature -20 C to +70 C Operating Temperature IEC 60794-1-2 E11 o o IEC 60794-1-2 F1 o o ` -20 C to +70 C Order Information 9/125 50/125 62.5/125 OM3-10G-300M 4C CF904EBK CF504EBK CF604EBK CF404EBK 6C CF906EBK CF506EBK CF606EBK CF406EBK 8C `CF908EBK CF508EBK CF608EBK CF408EBK 12C CF912EBK CF512EBK CF612EBK CF412EBK Cable Print Mark : FITEK OPTICAL CABLE XXC 62.5/125 =XXXXXX M= These specifications are subject to change without prior notification.