Transcript
Single Fiber SFP Series SFPS-ELX-3149D and 4931D series SFP Single-Mode, Single-Fiber Transceiver for 100Mbps to 1.25Gbps FE/GBE /FC
Features • Up to 1.25Gbps Data Rate • Side A: 1310nm TX /1490nm RX • Side B: 1490nm TX /1310nm RX • 20km with 9/125 µm SMF • Digital Diagnostics
Applications • • • •
Fiber Channel Links WDM Gigabit Ethernet Links Other Optical Links FTTX Application
Product Description The SFPS-ELX-3149 and SFPS-ELX-4931 series is small form factor pluggable module for Gigabit Ethernet 1000BASE-BX and Fiber Channel single fiber applications by using 1310nm / 1490nm transmitter and 1490nm / 1310nm receiver. It is with the SFP 20-pin connector to allow hot plug capability. The transmitter section uses a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated B type / A type detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The SFPS-ELX-3149 AND SFPS-ELX-4931 series are designed to be compliant with SFF-8472 Multisource.
SFPS-ELX-4931D-rev.1
Opticonnect SYSTEMS B.V., an Optical Networking vendor with its headquarters in the Netherlands, provides Optical Transport solutions and Optical Transceivers at the best price performance ratio possible. Our goal is to simplify the planning, deployment and maintenance of
For more information please contact: tel : +31 79 73 70 152 email :
[email protected]
complex Optical Networks. This is achieved by our user friendly planning apps and information, sophisticated products and transparent support. Relying on our superior product quality, all items are supplied with life time warranty.
Opticonnect Systems bv, The Netherlands, www.opticonnect.com
1
Single Fiber SFP Series Ordering Information Part No.
Data Rate
Wavelength
Interface
Temp.
DDMI
SFPS-ELX-3149D
0.1~1.25Gbps
1310nm
LC
Standard
YES
SFPS-ELX-4931D
0.1~1.25Gbps
1490nm
LC
Standard
YES
Regulatory Compliance Feature
Standard
Performance
Electrostatic Discharge (ESD) to the Electrical Pins
MIL-STD-883G Method 3015.7
Class 1C (>1000 V)
Electrostatic Discharge to the enclosure
EN 55024:1998+A1+A2 IEC-61000-4-2 GR-1089-CORE
Compliant with standards Compliant with standards Noise frequency range: 30MHz to 6GHz. Good system EMI design practice required to achieve Class B margins. System margins are dependent on customer host board and chassis design. Compliant with standards. 1KHz sinewave, 80% AM, from 80MHz to 1GHz. No effect on transmitter/receiver performance is detectable between these limits.
Electromagnetic Interference (EMI)
FCC Part 15 Class B EN55022:2006 CISPR 22B :2006 VCCI Class B
Immunity
EN 55024:1998+A1+A2 IEC 61000-4-3
Laser Eye Safety
FDA 21CFR 1040.10 and 1040.11 EN (IEC) 60825-1:2007 EN (IEC) 60825-2:2004+A1
CDRH compliant and Class I laser product. TüV Certificate No. 50135086
Component Recognition
UL and CUL EN60950-1:2006
UL file E317337 TüV Certificate No. 50135086 (CB scheme )
RoHS6
2002/95/EC 4.1&4.2 2005/747/EC 5&7&13
Compliant with standards*note1
Note1: For update of the equipments and strict control of raw materials, EOPTOLINK has the ability to supply the customized products since Jan 1st, 2007, which meet the requirements of RoHS6 (Restrictions on use of certain Hazardous Substances) of European Union. In light of item 5 in RoHS exemption list of RoHS Directive 2002/95/EC, Item 5: Lead in glass of cathode ray tubes, electronic components and fluorescent tubes. In light of item 13 in RoHS exemption list of RoHS Directive 2005/747/EC, Item 13: Lead and cadmium in optical and filter glass. The three exemptions are being concerned for Eoptolink’s transceivers, because Eoptolink’s transceivers use glass, which may contain Pb, for components such as lenses, windows, isolators, and other electronic components.
Absolute Maximum Ratings*note2
SFPS-ELX-4931D-rev.1
Parameter Storage Temperature Supply Voltage Operating Relative Humidity
Symbol Ts Vcc
Min. -40 -0.5 -
Max. +85 3.6 95
Unit °C V %
Note 2:Exceeding any one of these values may destroy the device immediately.
Opticonnect Systems bv, The Netherlands, www.opticonnect.com
2
Single Fiber SFP Series Recommended Operating Conditions Parameter
Symbol
Operating Case Temperature
TA
Power Supply Voltage
Vcc
Power Supply Current FE FC Date Rate GBE
Icc
Min.
SFPS-EX-3155D AND SFPS-EX5531D
Typical
Max.
0 3.15
3.3
Unit
+70
°C
3.45
V
300
mA Mbps Gbps Gbps
100 1.063 1.25
Performance Specifications - Electrical Parameter
Symbol
Min.
Typ.
Max
Unit
Notes
Transmitter LVPECL Inputs(Differential) Input Impedance (Differential) Disable TX_Dis Enable TX_FAULT
Vin
400
Zin
85
Fault Normal
100
2000
mVpp
115
ohm
2
Vcc+0.3
0
0.8
2 0
Vcc+0.3 0.5
V
2000
mVpp
115
ohm
2
Vcc+0.3
V
0 2.5 0
0.8
V V V
AC coupled inputs*(note5) Rin > 100 kohm @ DC
V
Receiver LVPECL Outputs (Differential) Output Impedance (Differential) LOS RX_LOS Normal
Vout
400
Zout
85
VoH VoL
MOD_DEF ( 0:2 )
100
0.5
AC coupled outputs*(note5)
With Serial ID
Performance Specifications - Optical - SFP-ELX-3149D Parameter 9µm Core Diameter SMF Data Rate
Symbol
Min.
L
Typical 20 1063/1250
Max.
Unit km Mbps
Transmitter
SFPS-ELX-4931D-rev.1
Center Wavelength
λC
1270
1310
Spectral Width (RMS) Average Output Power*(note3) Extinction Ratio @ 1250Mbps Rise/Fall Time(20%̚80%) Total Jitter Output Optical Eye*(note4) TX_Disable Assert Time Pout@TX Disable Asserted Pout@TX Disable Asserted
Δλ Pout -8 ER 6 9 tr/tf TJ Compliant with IEEE 802.3z*(note7) t_off Pout Pout Receiver
1350
nm
3.5 -3 0.26 260
nm dBm dB ns ps
10 -45 -45
us dBm dBm
Opticonnect Systems bv, The Netherlands, www.opticonnect.com
3
Single Fiber SFP Series Center Wavelength Receiver Sensitivity*(note6)@1250Mbps Receiver Overload LOS De-Assert@1250Mbps LOS Assert LOS Hysteresis*(note8)
λC
1450
1490
Pmin Pmax LOSD LOSA
1530
nm
-22
dBm
-3 -23 -45 0.5
dBm dBm dBm dB
SFPS-ELX4931D Parameter 9µm Core Diameter SMF Data Rate
Symbol
Min.
L
Typical 20 1063/1250
Max.
Unit km Mbps
Transmitter Center Wavelength
λC
1520
nm
Spectral Width (-20dB) Average Output Power*(note3) Extinction Ratio @ 1250Mbps Side Mode Suppression Ratio Rise/Fall Time(20%̚80%) Output Optical Eye*(note4) TX_Disable Assert Time Pout@TX Disable Asserted
Δλ Pout -8 ER 6 9 SMSR 30 tr/tf Compliant with IEEE 802.3ah-2004*(note7) t_off Pout Receiver
1 -3
260
nm dBm dB dB ps
10 -45
us dBm
Center Wavelength
λC
1330
nm
-23
dBm dBm dB dB dBm dBm dB
(note6)
Receiver Sensitivity* Receiver Overload Return Loss Optical Path Penalty LOS De-Assert LOS Assert LOS Hysteresis*(note8)
Pmin Pmax
LOSD LOSA
1460
1290
1490
-3 12 1 -24 -45 0.5
Note3: Output is coupled into a 9/125μm single-mode fiber. Note4: Filtered, measured with a PRBS 27-1. Note5: LVPECL logic, internally AC coupled. Note6: Measured at all data rates specified in Data Rate table with ER=9 dB, 27-1 PRBS data pattern, BER <1E-12. Note7: Eye Pattern Mask Note8: LOS Hysteresis
SFPS-ELX-4931D-rev.1
Opticonnect Systems bv, The Netherlands, www.opticonnect.com
4
