Preview only show first 10 pages with watermark. For full document please download

Single Kettle Control Panels

   EMBED


Share

Transcript

Project ________________________________ ™ Cleveland COOK CHILL SYSTEMS COOK/CHILL CONTROL CENTERS Item __________________________________ Quantity _______________________________ FCSI Section ____________________________ Approval _______________________________ Cook/Chill Systems Date __________________________________ MODELS:  HA-SE-CC  HA-SE-CC/W (Wall Mount)  IA-SE-CC  IA-SE-CC/W (Wall Mount) Single Remote Mounted Controls for Horizontal or Inclined Mixer Kettles Cleveland Standard Features I Floor or wall mounting models (please specify) I Variable mixer speed control I Mixer start/stop button I Solid state temperature control with digital read-out I Time/Temperature Chart Recorder to provide permanent record of Batch Processing I Control for automatic and manual steam I Control for automatic and manual water cooling I Simmer control for delicate products I Automatic water meter with accumulative “add on” button and digital readout (for cold water only) I All stainless steel construction I Type 4X rating I U.L. Listed I Accepted for use in U.S.D.A. Inspected Facilities Options & Accessories Ë Lockable cover over controls Ë Water meter for hot and cold kettle fill Ë Computer interface connections Model HA-SE-CC shown Short Form Specifications Shall be Cleveland Model _____-SE-____, COOK/CHILL CONTROL CENTER with single controls as follows; Solid State Temperature Control with Digital Read-Out; Time/Temperature Chart Recorder; Controls for Automatic and Manual Water Cooling; Simmer Control; Automatic Water Meter with accumulative “add on” button and digital readout; Variable Mixer Speed Control and Mixer Start/Stop Button. SECT. 1333 East 179 St., Tel: 1-216-481-4900 Web Site: www.ClevelandRange.com Cleveland, Ohio, U.S.A. 44110 Fax: 1-216-481-3782 Email: [email protected] XIV 15 PAGE 0609 MINIMUM CLEARANCE FRONT SIDE REAR 15" INVERTERS ARE EXTERNIALY MOUNTED FOR WALL MOUNTED CONTROL PANELS 36" 12" 0" 18 3/4" PLAN VIEW 24" WALL MOUNTED CONTROL PANEL HEIGHT DIMENSION 51" 69" 18" AFF FRONT VIEW SINGLE CONTROL PANEL MODEL HA-SE-CC (floor mount) HA-SE-CC/W (wall mount) IA-SE-CC (floor mount) IA-SE-CC/W (wall mount) ELECTRICAL 208V/ 3PH/60Hz AMPERAGE BASED ON KETTLE SIZE ELECTRICAL POWER TO AND FROM CONTROL PANEL • CONTRACTOR MUST CUT ENTRY HOLE • TOP OR BOTTOM POWER ENTRY RECOMMENDED • MUST USE PROPER CONNECTIONS TO MAINTAIN U.L. LISTING THE DEPTH AND WIDTH DIMENSIONS ARE THE SAME FOR BOTH THE FLOOR MOUNT AND WALL MOUNT CONTROL PANELS. XIV 16 (NOT TO SCALE) SECT. Cleveland Range reserves right of design improvement or modification, as warranted. PAGE 0609 Litho in USA