Single Oven Slide In Gas Range Pgs920sef Ge Profile

Transcript

SINGLE OVEN SLIDE IN GAS RANGE PGS920SEF GE Profile™ Series 30" Slide-In Gas Range withSINGLE WarmingOVEN DrawerSLIDE IN30"GAS RANGE 31 1/4" Dimensions and Installation Information (in inches) Note: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to 2 1/2"avoid interference with the handle. 2 1/2" Note: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194° temperature rating. GAS PIPE AND ELECTRICAL OUTLET LOCATIONS 4 1/2" GAS PIPE AND ELECTRICAL 31 1/4" OUTLET LOCATIONS Recommended area for 120V outlet on rear wall and area for through-the-wall conection of pipe stub and shut-off valve. 4" 5" 8" Recommended area for 120V outlet on rear wall and area for through-the-wall conection of pipe stub and shut-off valve. 26 7/8" w/o handle 29 3/8" w/ handle 47 5/8" Minimum to cabinets on either side of the range. 26 7/8" 29 3/8" w/ handle 47 5/8" for through-the-floor connection of pipe stub and shut-off valve. Recommended area for 120V outlet on rear wall and area for Minimum to through-the-wall conection of cabinets onpipe stub and shut-off valve. 35 3/4" - 37 1/4" w/o handle Recommended area for through-the-floor connection of pipe stub and shut-off valve. 30" 30" 47 5/8" w/ handle 18" 6" Minimum clearance to left 30" wall either side of the range. 30" 30" Minimum 4" 14 1/2" 3" 18" 30" cabinets above6" Minimum 9" Minimum countertops clearance to Minimum clearance to left wall 24" 8" 2" 14 1/2" 13" 3" 5/8" right wall 6" Minimum Recommended13" area for through-the-floor connection of pipe stub and shut-off 36"valve. Front edge of the range side panel forward from cabinet clearance to right wall appliance questions, visit our website at geappliances.com or call GE Answer 30" Center® 6" service, 800.626.2000. Minimum Minimum 5/8" Maximum depth for cabinets above countertops depth for To cabinets below cooktop and at the range back clearance to left wall 8" 5" 30" Maximum 6" To cabinets below 0" 36" cooktop and at the range Minimum to back cabinets on either side For answers torange. your Monogram®30" or GE® of the 18" 4" 14 1/2" 9" 30" 9" 2" 3" 2" GAS PIPE AND ELECTRICAL OUTLET LOCATIONS Recommended area4 1/2" 31 1/4" w/o handle 24" 5" SINGLE OVEN SLIDE IN GAS RANGE 292 3/8" 1/2" 4 1/2" 24" Installation Information: Before installing, consult 5 3/4" - 37 1/4" 35 3/4" - 37 1/4" installation instructions packed with product for ­ current dimensional data. 26 7/8" 30" 0" * 6" Minimum *ADA qualified based on Uniform Federal Accessibility Standards clearance to right wall Front edge of the range side panel forward from cabinet 0" To cabinets below cooktop and at the range back 0" All GE ranges are equipped with Maximum To cabinets below cooktop an Anti-Tip device. The installation depth for and of this device is an important, at the range back step in the installation cabinets above required of the range. countertops 13" Specification Created 6/13 230126 PGS920SEF GE Profile™ Series 30" Slide-In Gas Range with Warming Drawer Features and Benefits • 20,000 BTU Tri-Ring Burner - Offers the flexibility of three different burners • C  enter Oval Burner - Large oval fifth burner is ideal for griddle or odd-size cookware • Reversible Cast-Iron Griddle/Grill - Two great ways to cook • Precise Simmer Burner - Delicate foods don’t burn with low, even heat • Gas Convection Oven - Circulates heat for high-quality results • Model PGS920SEFSS - Stainless steel PGS920SEF Specification Created 6/13 230126