Preview only show first 10 pages with watermark. For full document please download

Single-phase On-line Double Conversion Vfi

   EMBED

Share

Transcript

WHAD Conventional UPS - Single-phase On-line double conversion VFI 3 100 87 3 100 88 3 100 89 3 100 90 3 100 91 3 100 92 Nominal power (VA) 800 Active power (W) 560 Item 3 100 93 3 100 94 3 100 95 3 100 96 3 101 09 3 101 10 3 100 97 3 101 11 3 101 12 3 100 98 3 100 99 3 101 00 3 101 01 1000 1500 2000 2500 3000 4000 5000 6000 700 1050 1400 1750 2100 2800 3500 4200 General Features Technology On-Line Double Conversion VFI-SS-111 Waveform Sinusoidal UPS architecture Conventional UPS systems with expandable back up time Input Input voltage 230 V Input frequency 50-60 Hz ±2% Autosensing Input Voltage Range 184V÷265V at 100% of the load THD Input current 3% Input power factor › 0,99 Output Output voltage 230V ± 1% Output frequency (nominal) 50/60 Hz synchronised Crest Factor 3,5 : 1 THD Output voltage 1% Allowed Overload Bypass 300% for 1 sec., 200% for 5 sec., 150% for 30 sec. Electromechanical, automatic and internally synchronised (due to overload or operating fault) Batteries Back up time Expansion yes Battery series Type/Voltage Back up time with 80% load (min) VRLA - AGM 48Vdc 20 15 VRLA - AGM 36Vdc 10 12 8 VRLA - AGM 144Vdc 18 VRLA - AGM 192Vdc 12 13 10 Configuration and management Display and Signals Multicolored LED status indicator, alarms and acoustic signals Communication Ports 1 RS232 serial port 1 logical level port 1 RS232 serial port Remote Management 1 RS232 serial port, 1 logical level port, 1 slot for network interface connection (CS121) UPS Communicator free to download software Mechanical features Dimensions (H x W x D) (mm) 355 x 88 x 390 460 x 160 x 425 Battery Cabinet Dimensions (H x W x D) (mm) 319 x 160 x 402 319 x 160 x 402 12 23 Net Weight (kg) 475 x 270 x 570 319 x 160 x 402 55 65 Environmental conditions Operating temperature (°C) 0÷40 Relative humidity (%) 20÷80 non-condensing Degree of protection IP21 ‹ 40 Noise level at 1 m (dBA) Heat Loss (BTU/h) 150 190 ‹ 42 287 380 ‹ 40 478 570 760 952 1140 Environmental conditions Standards EN 62040-1, EN 62040-2, EN 62040-3 Warranty Standard Warranty 2 years NOTE: back up time values, expressed in minutes, are measured during optimal operating conditions. CONVENTIONAL UPS WWW.UPS.LEGRAND.COM UPS 43