Transcript
Synthesized Intelligent IP outdoor PIR detectors
SIP-3020-IP SIP-4010-IP SIP-404-IP The SIP-3020-IP SIP-4010-IP and SIP-404-IP are outdoor, middle-range, IP infrared sensors which are POE compliant and integrate seamlessly with major Video Management Systems (VMS) providers*. These sensors are specifically designed to trigger outdoor IP CCTV systems where high performance is required; and make the visual verification for remote video monitoring, easier and more accurate. The SIP-3020-IP SIP-4010-IP and SIP-404-IP cover a detection area of respectively 30x20m, 40x10m, and 40x4m; and all provide two independent sensitivity selectors for near and far areas. The SIP-3020-IP, SIP-4010-IP SIP-404-IP feature an intelligent detection system that uses data from the ambient environment such as temperature and illuminance to automatically adjust the sensitivity and minimise false alarms. They are also equipped with anti-masking and anti-rotation features to detect vandalism and tampering.
FEATURES • Intelligent PIR detection system • Detection of ambient temperature and illuminance for automatic sensitivity management • Advanced detection algorithm • Three dual pyro-elements with patented Double Conductive Shielding • Anti-vandalism functions Anti-rotation function with accelerometer Anti-masking function with photo-beam Reinforced polycarbonate housing
• Max. 4m (13ft.) installation height • Independent sensitivity selector for near/far areas • Adjustable alarm interval time • BS8418 Compliant - U.K. • POE compliant • IP sensors integrated with major VMS providers* *The SIP-3020-IP, SIP-4010-IP SIP-404-IP are currently fully integrated with Milestone XProtect® and the REDWALL event code is integrated with Genetec Security Center. Please check the latest status by consulting the integration list on our website.
OPTIONS SIP-AT - SIP Adjustment tools (include AVF-1 Area view finder and AWT-3 Audible walk tester) SIP-HU - Heating Unit (When the SIP-HU is used, the power for SIP series should be 22-26VAC.)
SIP-MINI HOOD - Sun/Snow shield
SPECIFICATIONS Model
SIP-3020-IP
Detection method Coverage
SIP-4010--IP
SIP-404-IP
Passive infrared 30 x 20 m (100 x 65 ft.)
40 x 10 m (130 x 33 ft.)
40 x 4 m (130 x 13ft)
Power supply
PoE * (IEEE802.3af/at compliant)
Current draw
40mA max, 75mA, 415mA max with optional heating unit
Mounting height Sensitivity selector Detection logic selector Alarm output (main area) Alarm interval period
2.3 to 4 m (7.6 to 13 ft.) Far: SH/H/M/L Near: SH/H/M/L AND / OR Redwall event Code (UDP/TCP) Off/15, 30, 60 sec
Alarm period
Approx. 2 sec
Warm-up period
Approx. 60 sec
Operating temperature IP rating Dimensions (H x W x D) Weight Supported protocols Function setting
-25 to +60 C, -40 to +60 C with optional heating unit (-13 to +140 F, -40 to +140 F with optional heating unit) If the heater is used, it should be external 22-26V AC (not POE) Main unit:IP65 / Chassis:IP55 248 x 102 x 266 mm (9.8 x 4.0 x 11.4 in.) 1.7 kg IPv4, ARP, UDP, TCP, ICMP, HTTP Use web browser • Specifications and design are subject to change without prior notice.
DETECTION AREAS SIP-3020-IP
SIP-4010-IP
SIP-404-IP
SYSTEM DIAGRAM Redwall IP detectors communicate with major video management software by Redwall Event Code protocol via Power-over-Ethernet. Alarm signal information generated by Redwall IP detectors can be used to control IP camera for automatic tracking of intruder’s movement, or alarm management on video management software.
REDWALL-IP
REDBEAM-IP
Quality detection system for video surveillance
Unrivalled performance
PoE IP Encoder
PIE-1 PIE-1 is an encoder that converts analog relay outputs to original ASCII code (Redwall Event Code) for Redwall and Fiber SenSys detectors. Detectors can be connected to Video Management Software platforms with PIE-1 and control IP cameras. PIE-1 is generating Redwall Event Code using the analog alarm inputs from the Redwall and Fiber SenSys detectors. Video Management Software receives the event code and sends a command to reposition to a pre-set and/or start recording with a camera. PIE-1 is compatible with Power over Ethernet (PoE). IEEE802.3 af/at making it possible to supply power using a PoE hub or switch. Only one LAN cable is needed to connect PIE-1 to a PoE hub or switch reducing your installation time and cost.
FEATURES
• Change Analog to IP PIE-1 changes analog relay output signals (N.C.) to original ASCII code.
• Compatible with Power over Ethernet PIE-1 can supply power to detector using a PoE hub or switch.
SPECIFICATIONS PIE-1 Power supply
PoE (IEEE802.3af/at compliant)
Power output
24 VDC 800 mA max, 12 VDC 50 mA max
Signal input
5 input for dry contacts (N.C. only)
Place of use
Outdoor (Inside of the waterproof case)
Alarm output
Redwall Event Code (UDP / TCP)
Operating temperature
-40 to +60˚C (-40 to +140˚F )
Operating humidity
95%RH. max
Operation LED (Normal)
Green light is ON when the power is supplied by PoE
Operation LED (When communicating)
Yellow light blinks during communication
Switch
Ethernet converter / LAN through
Function setting
Use web browser
Dimension
67.5 mm x 94.7 mm x 33 mm (3.66” x 3.73” x 1.30”)
Weight
270 g (8.8 oz: including all parts) Main unit: 90 g (3.2 oz)
Supported protocols
IPv4, ARP, UDP, TCP, ICMP, HTTP Accessories Power output cable x2, Alarm input cable x3, Installation instruction, Mounting plate for a Double Gang Box, Gasket sheet for Gang Box, Mounting Screws x6 ∗ Specifications and design are subject to change without prior notice.
PoE IP Encoder
PIE-1 FEATURES
Control IP camera Via Video Management Software IP camera PIE-1
“PIE126” AND “A1” = Preset1
SIP Series
Detect!
Preset1
Video Management Software Redwall Event Code PIE126MOA1_
Go to Preset1
Video Management Software
Camera Connector for dry contact Connector for the power Redwall Event Code Redwall Event Code & PoE
Redscan series (PoE only)
PoE hub or switch
SIP series Photo electric detector Fiber sensys detector (1 or 2 channels model only)
DIMENTIONS 94.7(3.73)
33(1.3) 67.5(2.26)
Unit: mm(inch)
OPTEX CO., LTD. (ISO 9001 Certified / ISO14001 Certified) 5-8-12 Ogoto, Otsu, Shiga, 520-0101 Japan TEL +81(0)77 579 8670 FAX +81(0)77 579 8190
http://www.optex.co.jp/e/
OPTEX INCORPORATED (USA) OPTEX (EUROPE) LTD. (UK)
http://www.optexamerica.com/
OPTEX SECURITY SAS (FRANCE) OPTEX SECURITY Sp. z o.o. (POLAND)
http://www.optex-security.com/
http://www.optex-europe.com/ (ISO9001 Certified)
http://www.optex.com.pl/
No.77033-00-17440-1207
