Transcript
Here is the communication sample for PLANET SIP product line making calls through SIP-50. Please use the SIP-50 as the SIP proxy server in the SIP-series products, insert the IP address, registration username/password, the registration and voice communications will be completed, and established.
n
VIP-260 IP Address: 172.16.0.160 Line Number: 6006
n
n n
n
VIP-450 IP Address: 172.16.0.45 Line Number: 7007
SIP-50 IP Address: 172.16.0.50
VIP-150T IP Address: 172.16.0.150 Line Number: 1001 VIP-152T IP Address: 172.16.0.152 Line Number: 3003
n n n
VIP-150PT IP Address: 172.16.0.155 Line Number: 2002 VIP-153PT IP Address: 172.16.0.153 Line Number: 5005 VIP-153T IP Address: 172.16.0.154 Line Number: 4004
VIP-150T/ communication sample via SIP-50 SIP-50 Configurations: STEP 1: Adding a new number “1001” in SIP-50 Please log in SIP-50, and browse to the “Subscriber” configuration menu. Click on the “New” in the subscriber-listing screen. Add a subscriber “1001” in the SIP-50 database.
STEP 2: To verify the SIP client registration status, browse to the “Subscriber” -à “Phone Status”; then you may see the client registration status on the screen. The registered (online) client will be green, and the un-registered (offline) clients will be red.
Machine configurations on the VIP-150T/VIP-152T: STEP 1: Log in VIP-150T/VIP-152T via web browser, and browse to the SIP configuration menu. Select machine operation in “Proxy”, and fill the registration data in the SIP configuration page.
IP address of SIP-50
Phone Number Authorization Name
After completing the configurations, please reboot machine to activate the SIP proxy settings. To check the registration status: the red LED on VIP-150T/VIP-152T will be OFF when the registration is successful, and the LED will be FLASHING when the registration failed.
========================================= Test the scenario: To verify the VoIP communication, you may make calls from SIP client (VIP-150T) 1001 to the SIP client (VIP-152T) 3003 or reversely make calls from SIP client (VIP-152T) 3003 to the SIP client (VIP-150T) 1001 =========================================
Machine configurations on the VIP-150PT/VIP-153PT/VIP153T: STEP 1: Log in VIP-150PT/VIP-153PT/VIP-153T via web browser, and browse to the SIP configuration menu, and fill the registration data in the SIP configuration page.
Authorization Name Phone Number IP address of SIP-50
After completing the configurations, please reboot machine to activate the SIP proxy settings. To check the registration status: When the VIP-150PT/VIP-153PT/VIP153T is registering to a SIP proxy server successfully, and then LCD screen will display the following message: SIP (5005) Date Time
========================================= Test the scenario: To verify the VoIP communication, you may make calls from SIP client (VIP-150PT) 2002 to the SIP client (VIP-153PT) 5005 or reversely make calls from SIP client (VIP-153PT) 5005 to the SIP client (VIP-150PT) 2002 =========================================
Machine configurations on the VIP-160/VIP-260: STEP 1: Log in VIP-160/VIP-260 via web browser, and browse to the SIP configuration menu, and fill the registration data in the SIP configuration page. STEP 2: Please fill SIP proxy of your VIP-160 Server Address field. (In the SIP-50 case, the Server address is 172.16.0.50) STEP 3: Please fill SIP port of your VIP-160 Port field. (The Port number is 5060) STEP 4: Please be reminded: Due to the connection via SIP Proxy, please enable the ”Send Registration Request with Expire Times” option field and adjust the number to 60.
IP address of SIP-50
STEP 5: In the Gateway Settings field, please fill line number length in the Dial Plan field. (The line numbers in SIP-50 account are 6006; please setup the dialing string length to "xxxx")
Phone Number
Authorization Name
STEP 6: After these configurations, please “Done” and Reboot machine to make the settings effective and check registration status. Supposing the connection is success, this Status is ONLine.
========================================= Test the scenario: To verify the VoIP communication, you may make calls from SIP client (VIP-260) 6006 to the SIP client (VIP-153T) 4004 or reversely make calls from SIP client (VIP-153T) 4004 to the SIP client (VIP-260) 6006 =========================================
Machine configurations on the VIP-450/VIP-050: STEP 1: Please via telnet or console session to login VIP-450/VIP-050, and insert the following commands:
SIP REGISTRATION RELATED: set sip reg add [reg_num] [expires] [registrar nwa] reg_num -> local phone number expires -> in seconds nwa ->
================================================== ITG>set sip reg add 7007 60 172.16.0.1 5060 vip450 xxx ================================================== SIP DNS CONFIGURATION : set sip dns_ip [ip] ip -> |0 to remove dns ip ============================================== ITG>set sip dns_ip xxx.xxx.xxx.xxx OK!! THE SIP CONFIG NEEDS TO BE COMMITTED AND THE ITG NEEDS TO BE REBOOTED FOR THE SIP CONFIG TO TAKE EFFECT... ==============================================
PORT CONFIGURATION : set port cid number ================================================== ITG>set port x cid number 7007 ================================================== The related parameters must be saved via commands: config activate and config store in order to be effective. =============================================== ITG>config activate OK ITG>config store OK ITG>net reset
ITG>set sip actreg SIP register phone 7007 0 status: SUCCESS SIP register phone 7007 1 status: SUCCESS ==================================================
2) After SIP configurations, please add the registrations number in machine dial plan: ============================================= ITG>atpm req ITG>atpm aadd 7007 1 3 4 4 ITG>atpm done ITG>atpm store ============================================= 3) Supposing the register number is 288925 of remote machine, please refer to following dial plan setting for establish the proper calling party: ============================================== ITG>atpm req ITG>atpm aadd 1001 1 6 10 0 ITG>atpm hadd 10 2 10 ITG>atpm dadd 10 sip 172.16.0.1 ITG>atpm done ITG>atpm store =============================================
========================================= Test the scenario: To verify the VoIP communication, you may make calls from SIP client 6006 to the VIP-450 / VIP-050 7007 or reversely make calls from VIP-450 / VIP-050 7007 to the SIP client 6006 =========================================
VIP-280 to VIP-320 via SIP-50
SIP-50 IP Address: 172.16.0.50
n
VIP-280 IP Address: 172.16.0.28 Line Number: 280
n
Machine configurations on the VIP-280/VIP-320: STEP 1:
STEP 2:
VIP-320 IP Address: 172.16.0.32 Line Number: 320
STEP 3:
========================================= Test the scenario: To verify the VoIP communication, you may make calls from SIP client (VIP-280) 280 to the SIP client (VIP-320) 320 or reversely make calls from SIP client (VIP-320) 320 to the SIP client (VIP-280) 280 =========================================
Note: the mentioned parameters and network settings in this sample should be carefully modified to meet the real-world applications.
