Preview only show first 10 pages with watermark. For full document please download

Sitransfm Wallmountkit Maned1

   EMBED

Share

Transcript

Contents INSTRUCTIONS ENGLISH SITRANS F M MAGFLO Electromagnetic flowmeter Wall mounting kit 083R9102 083R9102 s 1 stainless steel mounting bracket with polyamide terminal box. 4 polyamide cable glands Dimensions Wall mounting Mount the wall bracket on a wall or in the back of a panel. Vertical pipe mounting Mount the wall bracket on a vertical or horizontal pipe using an ordinary hose clip or a duct strap. Horizontal pipe mounting Order no.: FDK:521H0141 SFIDK.PI.026.C2.52 SITRANS F M MAGFLO Electromagnetic flowmeter, Wall mounting kit Take the SENSORPROM unit from the terminal box. Fit the SENSORPROM unit on the connection plate. The SENSORPROM unit must be mounted correctly, i.e. the text must be turned away from the connection plate. Fit the sensor cables, supply cable and output cable through the cable glands at the bottom of the wall bracket. Locate the connection plate in the wall bracket as shown and connect the cables. (See electrical connection diagram in the handbook). The unscreened cable leads must be as short as possible. The electrode cable and the coil cable must be kept separate to prevent interference. Mount the signal converter on the wall bracket. 2 - this page has been updated (new drawing) 2004.01