Transcript
Teccor® brand Thyristors 25 Amp Standard SCRs
SK625xD Series
RoHS
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. Features & Benefits • RoHS compliant • Voltage capability up to 1600 V • Surge capability up to 250 A Applications
Agency Approval Agency
• Electrically isolated package “LD -Package” and UL recognized for 2500VRMS
Typical applications are AC solid-state switches, industrial power tools, line rectification 50/60Hz.
Agency File Number
Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage.
E71639
Main Features Schematic Symbol Symbol IT(RMS) VDRM /VRRM IGT
Value
Unit
25
A
1600
V
35
mA
A
K
G
SK625xD Series
©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/20/15
Teccor® brand Thyristors 25 Amp Standard SCRs
Absolute Maximum Ratings — 25A SCR Symbol
Parameter
Test Conditions
VDRM /VRRM
Repetitive Peak off-state/Reverse Voltage
VDSM/VRSM
Non-repetitive peak off-state/Reverse voltage
IT(RMS)
RMS on-state current
IT(AV)
Average on-state current
SK625RD
TC = 90°C
SK625LD
TC = 60°C
SK625RD
TC = 90°C
V
1700
V
25
A
16
A
250
single half cycle; f = 60Hz; TJ (initial) = 25°C
300
tp = 8.3 ms
375
A 2s
Critical rate of rise of on-state current
100
A/μs
Peak gate current
TJ = 125°C
1.5
A
Average gate power dissipation
TJ = 125°C
Peak non-repetitive surge current
I 2t
I2t Value for fusing
IGM PG(AV)
A
1
W
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
Value
Unit
35
mA
Tstg TJ
TC = 60°C
Unit
1600
single half cycle; f = 50Hz; TJ (initial) = 25°C
ITSM
di/dt
SK625LD
Value
Notes : x = package
Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol IGT VGT
Test Conditions MAX.
VD = 12V; RL = 30Ω
MAX.
1.5
V
MIN.
2000
V/μs
dv/dt
VD = 2/3 VDRM; gate open; TJ = 125°C
VGD
VD = VDRM; RL = 3.3 kΩ; TJ = 125°C
MIN.
0.2
V
IH
IT = 500mA (initial)
MAX.
120
mA
TYP.
25
μs
TYP.
5
μs
IT=0.5A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs
tq
IG = 2 x IGT; PW = 15µs; IT = 50A
tgt Notes : x = package
Static Characteristics Symbol VTM IDRM / IRRM
Test Conditions IT = 50A; tp = 380μs
Unit
1.8
V
MAX. TJ = 25°C
VDRM / VRRM
Value
TJ = 125°C
MAX.
10
μA
4
mA
Thermal Resistances Symbol Rθ(J-C)
SK625xD Series
Parameter Junction to case (AC)
Value SK625RD
1.0
SK625LD
1.9
Unit °C/W
©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/20/15
Teccor® brand Thyristors 25 Amp Standard SCRs
Figure 2: N ormalized DC Gate Trigger Voltage vs. Junction Temperature
2.5
2.0
2.0
1.6 Ration of VGT /VGT (TJ=125o C)
Ration of IGT /IGT (TJ =125o C)
Figure 1: Normalized DC Gate Trigger Current vs. Junction Temperature
1.5
1.0
0.5
0.0
1.2
0.8
0.4
-40
-15
10
35
60
85
0.0
110 125
-40
Junction Temperature (TJ)-(o C)
Intantaneous On-state Current (iT) – Amps
Ration of I H /IH (TJ=125o C)
1.6
1.2
0.8
0.4
-15
10
35
60
85
70 60 50 40 30 20 10 0
0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9
Figure 6: M aximum Allowable Case Temperature vs. RMS On-State Current Maximum Allowable Case Temperature (TC) - °C
Average On-State Power Dissipation [PD(AV)] - (Watts)
25 20 15 10 5
10
15
20
RMS On-State Current [IT(RMS)] - (Amps)
SK625xD Series
110 125
Instantaneous On-state Voltage (vT) – Volts
30
5
85
80
110 125
Figure 5: Power Dissipation (Typical) vs. RMS On-State Current
0
60
90
Junction Temperature (TJ)-(o C)
0
35
Figure 4: O n-State Current vs. On-State Voltage (Typical)
2.0
-40
10
Junction Temperature (TJ)-(o C)
Figure 3: Normalized DC Holding Current vs. Junction Temperature
0.0
-15
25
130 120 110 SK625RD
100 90 80
SK625LD
70 60 50 40
CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180°
0
10
20
30
RMS On-State Current [IT(RMS)] - Amps
©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/20/15
Teccor® brand Thyristors 25 Amp Standard SCRs
Figure 7: Maximum Allowable Case Temperature vs. Average On-State Current Maximum Allowable Case Temperature (TC) - °C
130 120 110 100 SK625RD
90 80
SK625LD
70 60 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180°
50 40
0
2
4
6
8
10
12
14
16
18
Average On-State Current [IT(AVE)] - Amps
Peak Surge (Non-repetitive)On-state Current (ITSM) – Amps
Figure 8: Surge Peak On-State Current vs. Number of Cycles 350
SUPPLY FREQUENCY: 50 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature
tp=10ms One cycle
300 250
Notes: 1. G ate control may be lost during and immediately following surge current interval. 2. O verload may not be repeated until junction temperature has returned to steady-state rated value.
200 150 100 50 0 1
10
100
1000
Surge Current Duration - Full Cycles
Environmental Specifications Test AC Blocking Temperature Cycling Temperature/ Humidity
Specifications and Conditions JESD22-A108C, 80% VDRM @125°C for 168 hours MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time EIA / JEDEC, JESD22-A101 168 hours; 100V - DC: 85°C; 85% rel humidity
Resistance to Solder Heat
JESD22-B106C
Solderability
J-STD-022, category 3, test A
SK625xD Series
Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage.
©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/20/15
Teccor® brand Thyristors 25 Amp Standard SCRs
Dimensions — TO-220AB (RD-Package) — Non-Isolated Mounting Tab Common with Center Lead Dimension
ax
E
m 8m
3.
ØM
A
H
D
V1
L3
F
C2
L1
C3 L2
Note: Maximum torque to be applied to mounting tab is 3 in-lbs (0.3Nm).
Min.
Typ.
Max.
4.40
4.60
0.173
0.181
0.61
0.88
0.024
0.035
C
0.46
0.70
0.018
0.028
C2
1.21
1.32
0.048
0.052
C3
2.40
2.72
0.094
0.107
D
8.60
9.70
0.339
0.382
E
9.60
10.4
0.378
0.409
F
6.20
6.60
0.244
0.260
29.8
1.102
1.70
0.045
2.95
0.104
2.54 28.0
L1 C
Inches Max.
B
G
B
Typ.
A
H G
Millimeters Min.
0.1
3.75
L2
1.14
L3
2.65
V1
1.173 0.148
45°
0.067 0.116 45°
Dimensions — TO-220AB (LD-Package) — Isolated Mounting Tab Dimension
ax
E
3.
C2
D
V1
L3 H L1
C3 L2
Min.
4.40
4.60
0.173
B
0.61
0.88
0.024
0.035
C
0.46
0.70
0.018
0.028
B
SK625xD Series
0.181
1.21
1.32
0.048
0.052
2.40
2.72
0.094
0.107
D
8.60
9.70
0.339
0.382
E
9.80
10.4
0.386
0.409
F
6.55
6.95
0.258
2.54 28.0
L1
Note: Maximum torque to be applied to mounting tab is 7 in-lbs. (0.8 Nm).
Max.
C3
G
C
Typ.
C2
H G
Typ.
Inches Max.
A A
F
ØM
m 8m
Millimeters Min.
29.8
1.102
3.75 1.14
1.70
0.045
L3
2.65
2.95
0.104
45°
1.173 0.148
L2 V1
0.274 0.1
0.067 0.116 45°
©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/20/15
Teccor® brand Thyristors 25 Amp Standard SCRs
Product Selector Gate Sensitivity
Type
Package
SK625LD
Part Number
35mA
Standard SCR
TO-220L
SK625RD
35mA
Standard SCR
TO-220R
Packing Options Part Number
Marking
Weight
SK625LDTP
SK625LD
2.2g
Tube
1000
SK625RDTP
SK625RD
2.0g
Tube
1000
Part Numbering System
Packing Mode
Base Quantity
Part Marking System
S K6 25 LD TP DEVICE TYPE S: SCR
PACKAGING TYPE TP: Tube Pack
SK625RD YMMXXX
VOLTAGE RATING K6: 1600V
CURRENT RATING 25: 25A
®
PACKAGE TYPE LD: TO-220 Isolated RD: TO-220 Non-Isolated
Date Code Marking Y:Year Code MM: Month Code XXX: Lot Trace Code
SK625xD Series
©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised: 08/20/15
Mouser Electronics Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Littelfuse: SK625LDTP SK625RDTP
