Transcript
Version 1.1
www.skeye.com Tel. +49 511 6102-0 Fax. +49 511 6102-411 Mail.
[email protected] Web. www.skeye.com Serviceline. +49 1803 232829 (0.09 EUR per min. within Germany) Höft & Wessel AG Skeye Rotenburger Str. 20 30659 Hannover
Contact: HW 90240
skeye.dart with Windows Mobile 6.5
Quick Start Guide Views and Functions
Loudspeaker
Stylus
Loudspeaker
LEDs
Imager/Camera Locking mechanism Storage battery
Display
Charging contacts
Scan key
Reset key
Scan key Cursor keys
Show/Hide touch / keypad field
ENTER key
DC
1-Wire
GND
To trigger the reset, press the reset key together with the round Power on key in the front.
Scan key
Microphone
Power on key
ESC key
Power supply unit port
System interface
Headset port
Imager/Camera pane
Standby (press about 5 s)
Activate Backup Battery
Start a GPRS connection
Upper edge (display)
Lower edge
In the battery compartment, push the switch of the backup battery () towards the display using the stylus.
1. 2.
The backup battery is on.
Prerequisite: a SIM card is inserted and the mobile terminal is on. Launch: Start menu ⇒ Settings ⇒ Connections ⇒ Wireless Manager
…
Backup battery switch – on
Insert SIM card Remove the battery. Push the locking of the card holder down. Swing open the cover of the card holder.
Carefully insert the SIM card. The conical corner should be top left, the contacts of the SIM card should rest on the contacts of the board. Only slightly insert the SIM card into the holder. If you push it too far into the holder the hinges of the holder might block.
3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
Switch on the phone by clicking the "Phone" line. Enter the PIN and press [Enter]. Close all dialogs. Launch: Start menu ⇒ Settings ⇒ Connections ⇒ Connections Under "My ISP" start the "Add a new modem connection" function. Enter the name of the connection. Select the modem. Enter the "Access point name" (APN) of your provider. Enter "User name", "Password" and "Domain" (if required). Click the [Advanced] button. If required, adjust special TCP/IP settings. The new connection is displayed in the list under "My ISP". Tap and hold the stylus onto "My Connection". 15. Select "Connect". The connection is established. 16. Launch: Start menu ⇒ Internet Explorer When the phone is switched on ("Wireless Manager" menu) the modem connection will be automatically activated when a browser is called.
Push the locking upwards, thus locking card holder incl. inserted card.
Scan barcodes Insert Battery Note: Prior to initial operation, the storage battery should be completely charged. To do so, place the device into the docking station. Insert the storage battery with its noses at the rounded part into the relevant recesses inside the battery compartment. Press the battery until it audibly engages.
Call HWImagerTool to test the scanner function: Start ⇒ File Explorer ⇒ Windows ⇒ HWImagerTool.exe HWImagerTool executes in the background and can be identified as a symbol in the Notification Tray.
Calmly and angularly hold the skeye.dart in the direction of the barcode to be scanned. A peep indicates that the entry of the barcode has been successful. The distance should amount to about 5-10 cm. An aid to orientation could be the skeye.dart lettering: aim with the red dot. HWImagerTool can be used to scan into any text field (e.g. WordPad).
Data Synchronisation
Switch on Device To switch on the device, use the middle, round key.
Power on key
Install on your PC the program for data synchronisation of a PC with a mobile device. This program should be appropriate to your operational system. Microsoft ActiveSync ⇒ for Windows XP Windows Mobile Device Center (WMDC) ⇒ for Windows Vista Device Stage ⇒ for Windows 7
These programs are available for free via www.Microsoft.com/getstarted. With this program you can handle the following tasks: adding and removing programs on the skeye.dart synchronisation of files (e-mail, contacts, calendar, songs, pictures and internet favourites) transfer and copying of files
