Sls-500 Extension

Transcript

World of Automation Chapter 3: SLS-500 Extension www.hiquel.com Index Index 3 Chapter 3: SLS-500 Extension .01 SLS-500-D .02 SLS-500-D..-16A .03 SLS-500-DBI-16A .04 SLS-500-DVR .05 SLS-500-8DI .06 SLS-500-8D .07 SLS-500-FBR .08 FBR - remote room control unit .09 SLS-500-DIM .10 SLS-500-PT100 .11 SLS-500-PT1000 .12 SLS-500-AU .13 SLS-500-AI .14 SLS-500-AU-AU .15 SLS-500-AI-AI .16 SLS-500-AI-AU .17 SLS-500-AU-AI .18 SLS-500-SIO .19 SLS-500-SMS .20 SLS-500-GW .21 SLS-500-T1 .22 SLS-500-MBUS .23 SLS-500-Modbus .24 Accessories - sensors HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:00 overview digital I/O expansion module supply voltage 24V= 4 4 digital inputs 24V= in 4 outputs SPNO or transistor (PNP) or photomos 230V~= max. 5A 24V= max. 800mA 60V~= max. 2A local LED indicators for inputs and outputs RS485 interface 4 out 1 potentiometer pre-programmable timer functions DIN 45mm DIN rail mount housing RS485 specification supply voltage 24V= ±10% power consumption 0,5W nominal max. 5A 230V~ 120V/1,5A 240V/1A output relay specification Ue/Ie AC-15 remote 9 * 9=81 24V/1A Ue/Ie DC-13 expected life time 7 4 1 0 SPNO 7 1x10 operations 5 1x10 operations max. 800mA 24V= PNP output photomos spec. max. 2A 60V= 24V= / * + weight 140g dimensions 45 x 85 x 75mm operating conditions -15 to +55°C non condensing L L L C- L DI4 0,6..0,8 Nm DO4 screw tightening torque DI2 ROM BUS RS485 *EN 60947-5-1 VDE 0435 C1-4 IP50 pozidrive 1 DI3 housing screws DO2 IP20 DO3 terminals DI1 - min. 5 mA protection class DO1 input specification 9 6 3 = + M- electrical output transistor spec. L+ mechanical 8 5 2 . SLS-500-D digital I/O module SLS-500-D + L N ordering information part no type supply input inp. galv. iso.* output SLS-500-DR-C local 24V= 4x 24V= yes 4x SPNO SLS-500-DR-D remote 24V= 4x 24V= yes 4x SPNO yes C SLS-500-DT-C local 24V= 4x 24V= yes 4x trans. PNP no C SLS-500-DT-D remote 24V= 4x 24V= yes 4x trans. PNP no C SLS-500-DS-C local 24V= 4x 24V= yes 4x photomos yes C SLS-500-DS-D remote 24V= 4x 24V= yes 4x photomos yes C outp. galv. iso.* yes housing types C * measurement input galvanically isolated from the power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:01 overview digital I/O expansion module universally for switching devices requiring mains power supply voltage 24V= 4 in 4 digital inputs 24V= or 230V~ 4 outputs 230V~/16A 4 3 roots for 4 relay contacts out MANUAL-OFF-AUTOMATIC switch LED indicators for inputs and outputs DIN RS485 interface 67.5mm DIN rail mount housing RS485 specification 9 * 9=81 +/~ / * + supply voltage power consumption 24V= 0,5W l output relay specification max. 16A 250V~ Ue/Ie AC-15 120V/3A Ue/Ie DC-13 24V/1,5A expected life time mechanical -/~ 230V~ / 24V= min. 1 mA / min. 3 mA protection class terminals housing screws screw tightening torque pozidrive 1 K3 weight dimensions 230g operating conditions -15 to +55°C non condensing Di4 C3-4 I O A K4 K3 K4 IP20 IP50 0,6..0,8 Nm 67,5 x 85 x 75mm *EN 60947-5-1 VDE 0435 24 14 I O A K2 13/23 L+ K1 Di3 Di2 K2 43 I O A 7 1x10 operations 44 RS485 K1 34 BUS I O A SPNO input specification - ROM 240V/3A 4 7x10 operations electrical 33 9 6 3 = Di1 8 5 2 . M- 7 4 1 0 C1-2 digital I/O module SLS-500-D..-16A SLS-500-D..-16A + L N L L L L ordering information part no inp. galv. iso.* output 24V= 4x 230V~ yes 4x SPNO outp. galv. iso.* yes housing types SLS-500-DRR-16A-C local type supply SLS-500-DRR-16A-D remote SLS-500-DR-16A-C local 24V= 24V= 4x 230V~ 4x 24V~ yes yes 4x SPNO 4x SPNO yes yes E E SLS-500-DR-16A-D remote 24V= 4x 24V~ yes 4x SPNO yes E input E * measurement input galvanically isolated from the power supply 3:02 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview supply voltage 24V= 4 digital inputs 4 4 outputs / bistable SPNO max. 16A in LED indicators for inputs and outputs RS485 interface manuel of automatic switch pre-programmable timer functions 4 out 67.5mm DIN rail mount housing DIN RS485 specification supply voltage 24V= power consumption 0,5W output relay specification Only for resistive and capacitive max. 16A 230V~ t< 20ms max. 165A loads suited expected life time SPNO L t< 200µms max. 800A 9 * 9=81 N 7 4 1 0 6 230g 67,5 x 85 x 75mm -15 to +55°C non condensing *EN 60947-5-1 VDE 0435 RS485 K2 K1 L N K3 C3-4 I O A Di4 Di3 I O A K4 K2 K3 K4 9 6 3 = / * + 44 weight dimensions operating conditions BUS I O A 34 0,6..0,8 Nm K1 43 screws screw tightening torque I O A 33 ROM Di2 M- IP20 13/23 terminals housing IP50 pozidrive 1 L+ protection class C1-2 - 230V~ min. 1mA 24 3x104 operations Di1 3x10 operations electrical input specification 14 mechanical 8 5 2 . SLS-500-DBI-16A digital input module SLS-500-DBI-16A + 16A Fuse C - Last ordering information part no inp. galv.iso.* output SLS-500-DBI-16A-C local type supply 24V= 4x 230V~ input yes 4x SPNO SLS-500-DBI-16A-D remote 24V= 4x 230V~ yes 4x SPNO outp. galv. iso.* yes yes housing types E E * measurement input galvanically isolated from the power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:03 SLS-500-DVR overview digital I/O expansion module in used to control up to 3 DC motors like shutters and skylights supply voltage 24V= 4 4 digital inputs 24V= 3 outputs for DC motor 3 LED indicators for inputs and outputs out pre-programmable timer functions RS485 interface 67.5mm DIN rail mount housing DIN RS485 specification supply voltage 24V= power consumption 0,5W output relay specification 9 * 9=81 +/~ / * + -/~ 7 4 1 0 8 5 2 . 9 6 3 = Ue/Ie DC-13 expexted life time mechanical SPNO 2x107 operations electrical 7x104 operations input specification 24V~ min. 3 mA protection class screws terminals IP20 housing IP50 pozidrive 1 screw tightening torque 0,6..0,8 Nm C3-4 Di4 Di3 Di2 Di1 C1-2 M- - ROM BUS RS485 K2 K3 K4 K1 weight 140g dimensions operating conditions 67,5 x 85 x 75mm -15 bis +55°C non condensing L+ K1 max. 5A 250V~ 24V/1,5A + MC+ MC- COM M1 M2 M3 M M M ordering information part no 3:04 type supply inp.galv.iso.* output SLS-500-DVR-C local 24V= 4x 24V~ - yes 1xSPCO SLS-500-DVR-D remote 24V= 4x 24V~ - yes 3xSPNO input outp.galv.iso.* yes yes housing types E E HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview digital input expansion module supply voltage 24V= 8 digital inputs 24V= 8 in LED indicator for input RS485 interface 1 potentiometer pre-programmable timer functions DIN local 45mm DIN rail mount housing RS485 specification supply voltage 24V= ±10% power consumption 0,5W nominal 24V= min. 5 mA input specification protection class terminals screws housing IP50 pozidrive 1 9 * 9=81 remote 7 4 1 0 IP20 screw tightening torque 0,6..0,8 Nm weight dimensions 140g 45 x 85 x 75mm operating conditions -15 to +55°C non condensing + 8 5 2 . 9 6 3 = / * + SLS-500-8DI digital input module SLS-500-8DI Di4 Di8 C- Di2 Di3 Di6 Di1 Di5 Di7 ML+ - ROM RS485 C- BUS + + ordering information part no type supply input SLS-500-8DI-C local 24V= 8x 24V= SLS-500-8DI-D remote 24V= 8x 24V= Gehäusetypen inp. galv. iso.* output outp. galv. iso.* yes yes - - housing types C C * measurement input galvanically isolated from the power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:05 SLS-500-8D digital output module SLS-500-8D overview digital output expansion module supply voltage 24V= 8 digital outputs 8 out SPNO 230V~= max. 5A or transistor (PNP) 24V= max. 800mA or photomos 60V~= max. 2A DIN LED indicator for output local RS485 interface 1 potentiometer pre-programmable timer functions RS485 45mm DIN rail mount housing specification 9 * 9=81 7 4 1 0 8 5 2 . 9 6 3 = remote / * + supply voltage 24V= ±10% power consumption 0,5W nominal output relay specification 120V/1,5A Ue/Ie DC-13 24V/1A expected life time mechanical L L L L L C1-4 Do4 Do2 Do3 M- Do1 RS485 max. 800mA 24V= PNP output photomos spec. protection class max. 2A 60V= terminals IP20 screws IP50 housing pozidrive 1 screw tightening torque 0,6..0,8 Nm weight 120g dimensions 45 x 85 x 75mm operating conditions -15 to +55°C non condensing Do7 Do8 L L L L C5-6 Do5 Do6 *EN 60947-5-1 VDE 0435 L+ BUS SPNO 7 1x10 operations output transistor spec. - ROM 240V/1A 5 1x10 operations electrical N max. 5A 230V~ Ue/Ie AC-15 + L N ordering information part no type supply input local 24V= - - 8x SPNO outp. galv. iso.* yes housing types SLS-500-8DR-C SLS-500-8DR-D remote 24V= - - 8x SPNO yes C SLS-500-8DT-C 24V= - - 8x trans. PNP no C SLS-500-8DT-D local remote 24V= - - 8x trans. PNP C SLS-500-8DS-C local 24V= - - 8x photomos no yes SLS-500-8DS-D remote 24V= - - 8x photomos yes C inp. galv. iso.* output C C * measurement input galvanically isolated from the power supply 3:06 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview digital room controller expansion module supply voltage 24V= 4 4 FBR room controller inputs 24V= 4 outputs in SPNO 230V~= max. 5A or transistor (PNP) 24V= max. 800mA FBR LED indicators for inputs and outputs room temperature controller with day/nightand auto-switch, temperature setting and temperature correction local RS485 interface 1 potentiometer pre-programmable timer functions 45mm DIN rail mount housing 4 out DIN specification supply voltage 24V= ±10% power consumption 0,5W nominal max. 5A 230V~ Ue/Ie AC-15 120V/1,5A Ue/Ie DC-13 24V/1A FBR SPNO room controller module 2-wire connection to SLS-FBR module 7 mechanical 1x10 operations electrical 1x105 operations output transistor spec. max. 800mA 24V= PNP input specification 24V= protection class min. 5 mA terminals IP20 package IP50 FBR FBR FBR DI3 DI4 C- DO3 DO4 C1-4 45 x 85 x 75mm M- dimensions operating conditions 0,6..0,8 Nm DI1 140g DI2 screw tightening torque weight - DO1 pozidrive 1 + DO2 screws FBR L+ expected life time 240V/1A FBR output relay specification RS485 remote L L L L ROM -15 to +55°C non condensing *EN 60947-5-1 VDE 0435 BUS RS485 SLS-500-FBR digital room controller module SLS-500-FBR + L ordering information N Gehäusetypen inp. galv. iso.* output outp. galv. iso.* part no type supply input SLS-500-FBR-R-C local 24V= 4x 24V= yes 4x SPNO yes C SLS-500-FBR-R-D remote 24V= 4x 24V= yes 4x SPNO yes C SLS-500-FBR-T-C local 24V= 4x 24V= yes 4x trans. PNP no C SLS-500-FBR-T-D remote 24V= 4x 24V= yes 4x trans. PNP no C FBR please refer to page 03:08 housing types * measurement input galvanically isolated from the power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:07 FBR-remote room control unit FBR-room control overview digital remote room control unit supply voltage 24V= two-wire connection room temperature measuring, party-switch and ideal value adjustment with button and 2 LEDs available various printing options are possible 2-piece housing for easy installation mountable on a standard flush box FBR-DS-PO 0 L+ Out FBR specification + - 3 FBR-DS-PO-S 2 1 0 weight 80g Switch Out L+ 100% -5 to +40°C width height + 3 24Vdc +-10% duty cycle temperature range dimensions FBR - supply voltage depth operating conditions FBR-DS-PO-S-LG 2 1 Title: Switch L+ Out LÜFTUNG EIN/AUS LED green FBR 0 -20 bis +40°C non condensing Programming LÜFTUNG AKTIV SLS-500-FBR R1.DAY1 R1.DAY1 Day Day FBR_DAY FBR_DAY R1.AUTO1 R1.AUTO1 Auto Auto FBR_Auto FBR_Auto R1.NIGHT1 R1.NIGHT1 Night Night Digital switch of the FBR FBR_Night FBR_Night + - R1.OPEN1 R1.OPEN1 Open Open 3 FBR-DS-PO-S-LG-LR R1.TEMP1 R1.TEMP1 Temp Temp FBR_Open FBR_Open FBR_Temp FBR_Temp Temperatue of the FBR Potentiometer of the FBR 2 1 ordering information Bestellinformationen + - FBR_Corr FBR_Corr Led red L+ Out Switch FBR LED green R1.CORR1 R1.CORR1 Corr Corr 0 part no 85mm 85mm 25mm digital switch potentiometer button LED Gehäusetypen left green LED right red housing type FBR - - - - - special FBR-DS-PO-S FBR-DS 1 1 - 1 - - - special FBR-PO - 1 - - - FBR-DS-PO 1 1 - - - special special special FBR-DS-PO-S 1 1 1 - - FBR-DS-PO-S-LG 1 1 1 1 - special FBR-DS-PO-S-LG-LR 1 1 1 1 1 special * At request are also other Labeling and assembly variants available 3:08 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview lighting dimmer expansion module 1 supply voltage 24V= out 1 dimmed output 600Watt 230V~ RS485 interface pre-programmable timer functions DIN 45mm DIN rail mount housing local RS485 specification 9 * 9=81 7 4 1 0 power consumption 24V= ±10% 0,5W nominal mains voltage rated output 230 Vac 600 VA rated current 2,5 A load type ohmic, inductice, automatic load detection control type phase control 1% pozidrive 1 screw tightening torque 0,6..0,8 Nm weight 155g - X LA screws L N PE N < 1mA (OFF-State) terminals IP20 housing IP50 L leakage current protection class M- resolution remote PE supply voltage 8 5 2 . 9 6 3 = / * + SLS-500-DIM lighting dimmer module SLS-500-DIM ROM dimensions 45 x 85 x 75mm operating conditions -15 to +55°C non condensing L+ RS485 + ordering information part no type supply input local 24V= - - 1x dimmer outp. galv. iso.* yes housing types SLS-500-DIM-C SLS-500-DIM-D remote 24V= - - 1x dimmer yes C inp. galv. iso.* output C * measurement input galvanically isolated from the power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:09 overview temperature input expansion module supply voltage 24V= 2 2 PT100 inputs in 4 transistor outputs (PNP) LED indicators for outputs RS485 interface local 4 out 1 potentiometer pre-programmable timer functions 45mm DIN rail mount housing C PT100 DIN specification RS485 remote 1 PT100 4-wire connection PT100 supply voltage 24V= ±10% power consumption 0,5W nominal output transistor spec. max. 800mA 24V= PNP input specification PT100 element -50°C to +300°C 1 3 2 5 4 0,1°C repeat accuracy protection class terminals screws IP50 housing pozidrive 1 2 PT100 3-wire connection PT100 1 PT100 3 2 4 5 Remark: Unused inputs are replaced by connections. IP20 screw tightening torque 0,6..0,8 Nm weight dimensions 120g 45 x 85 x 75mm operating conditions -15 to +55°C non condensing 4 T T T DO2 DO3 DO4 L L L L 5 2 3 T 1 M- - DO1 SLS-500-PT100 temperature input module SLS-500-PT100 ROM C 1-4 L+ RS485 + - ordering information Gehäusetypen inp. galv. iso.* output outp. galv. iso.* part no type supply input SLS-500-PT100-C local 24V= 2x PT100 no 4x trans. PNP no C 24V= 2x PT100 no 4x trans. PNP no C SLS-500-PT100-D remote housing types * The ordering information for various sensors you will find on page 03:23 * measurement input galvanically isolated from the power supply 3:10 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview temperature input expansion module 4 supply voltage 24V= up to 4 PT1000 inputs in 4 transistor outputs (PNP) LED indicators for outputs local RS485 interface 1 potentiometer 4 out pre-programmable timer functions 45mm DIN rail mount housing C PT1000 DIN specification RS485 remote supply voltage 24V= ±10% power consumption 0,5W nominal output transistor spec. max. 800mA 24V= PNP input specification PT1000 element 4 PT1000 2-wire connection -50°C to +300°C PT1000 PT1000 PT1000 PT1000 0,1°C repeat accuracy 1 screws screw tightening torque pozidrive 1 weight 120g dimensions 45 x 85 x 75mm -15 to +55°C non condensing 5 4 Remark: Unused inputs are replaced by connections. 0,6..0,8 Nm 4 T T T T DO4 L L L L 5 2 3 - M- operating conditions 3 2 DO3 IP50 1 IP20 housing DO1 terminals DO2 protection class ROM C 1-4 L+ RS485 SLS-500-PT1000 temperature input module SLS-500-PT1000 + - ordering information part no type supply input inp. galv. iso.* output outp. galv. iso.* housing types SLS-500-PT1000-C local 24V= 4x PT1000 no 4x trans. PNP no C SLS-500-PT1000-D remote 24V= 4x PT1000 no 4x trans. PNP no C * The ordering information for various sensors you will find on page 03:23 * measurement input galvanically isolated from the power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:11 overview analogue I/O expansion module 4 supply voltage 24V= 4 analogue inputs 0-10V in 1 analogue output 0-10V 4 transistor outputs (PNP) local 4 out LED indicators for outputs RS485 interface 1 potentiometer pre-programmable timer functions U 45mm DIN rail mount housing 0-10V DIN specification RS485 remote supply voltage 24V= power consumption 0,5W nominal max. 800mA 24V= PNP transistor output spec. max. 8kHz analogue output spec. resolution repeat accuracy - AO1 010V AI4 AI2 010V 010V 010V AI3 M- AI1 010V ROM RS485 T T T DO2 DO3 DO4 L L L L 12 bit 0,1% ±0,5% resolution input resistance 10 bit 0 - 10V= protection class 50kOhm terminals screws IP50 housing pozidrive 1 IP20 screw tightening torque 0,6..0,8 Nm weight 120g dimensions 45 x 85 x 75mm -15 to +55 °C non condensing C1-4 T 0 - 10V= max. 2mA precision analogue input spec. operating conditions DO1 BUS L+ SLS-500-AU analogue I/O module (voltage) SLS-500-AU + - ordering information Gehäusetypen inp. galv. iso.* output outp. galv. iso.* part no type supply input SLS-500-AU-C local 24V= 4x 0-10V no 4x trans. PNP no C SLS-500-AU-D remote 24V= 4x 0-10V no 4x trans. PNP no C housing types * The ordering information for various sensors you will find on page 03:23 * measurement input galvanically isolated from the power supply 3:12 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview analogue I/O expansion module supply voltage 24V= 4 4 analogue inputs 0-20 mA in 1 analogue output 0-10 V 4 transistor outputs (PNP) LED indicators for outputs local RS485 interface 1 potentiometer 4 out pre-programmable timer functions I 45mm DIN rail mount housing 4-20mA DIN specification 0,5W nominal output transistor spec. max. 800mA 24V= PNP max. 8kHz - 0,1% 0 - 20mA screw tightening torque weight 120g dimensions operating conditions 45 x 85 x 75mm -15 to +55°C non condensing 0,6..0,8 Nm AI3 housing IP50 pozidrive 1 AI4 screws T T T T DO4 250 Ohm terminals IP20 M- protection class AI2 L L L L ROM RS485 L+ BUS C1-4 input resistance 010V 020mA AO1 10 bit DO3 resolution ±0,5% AI1 precision analogue input spec. DO2 repeat accuracy + 0 - 10V= max. 2mA 12 bit DO1 analogue output spec. resolution RS485 remote 24V= ±10% supply voltage power consumption SLS-500-AI analogue I/O module (current) SLS-500-AI + - ordering information part no type supply input inp. galv. iso.* output outp. galv. iso.* housing types SLS-500-AI-C local 24V= 4x 0-20mA no 4x trans. PNP no C SLS-500-AI-D remote 24V= 4x 0-20mA no 4x trans. PNP no C * The ordering information for various sensors you will find on page 03:23 * measurement input galvanically isolated from power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:13 overview analogue I/O expansion module supply voltage 24V= 4 4 analogue inputs 0-10V in 4 analogue outputs 0-10V RS485 interface 4 1 potentiometer pre-programmable timer functions local out 45mm DIN rail mount housing U 0-10V DIN specification RS485 remote supply voltage 24V= ±10% power consumption 0,5W nominal analogue output spec. resolution repeat accuracy V A V A Ai AI4 AI3 AI2 AI1 M- - ROM resolution input resistance 10 bit 0 - 10V= 50kOhm terminals IP20 housing IP50 pozidrive 1 screw tightening torque 0,6..0,8 Nm weight 120g dimensions operating conditions 45 x 85 x 75mm -15 to +55°C non condensing RS485 Ao V A AO4 V A AO3 AO1 V A T L+ V A AO2 BUS 0,1% ±0,5% screws V A 0 - 10V= max. 2mA 12 bit precision analogue input spec. protection class V A T SLS-500-AU-AU analogue I/O module (voltage) SLS-500-AU-AU + ordering information Gehäusetypen inp. galv. iso.* output outp. galv. iso.* part no type supply input SLS-500-AU-AU-C local 24V= 4x 0-10V no 4x 0-10V no C 24V= 4x 0-10V no 4x 0-10V no C SLS-500-AU-AU-D remote housing types * The ordering information for various sensors you will find on page 03:23 * measurement input galvanically isolated from the power supply 3:14 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview analogue I/O expansion module supply voltage 24V= 4 4 analogue inputs 0-20mA in 4 analogue outputs 0-20mA RS485 interface 1 potentiometer local pre-programmable timer functions 45mm DIN rail mount housing 4 out I 4-20mA DIN specification 24V= ±10% 0,5W nominal analogue output spec. resolution 0 - 10V= max. 2mA 10 bit repeat accuracy RS485 remote supply voltage power consumption 0,1% precision analogue input spec. ±0,5% resolution input resistance 12 bit 250 Ohm protection class terminals screws housing IP50 pozidrive 1 0 - 20mA V A IP20 V A V A AI4 AI3 AI2 AI1 M- ROM RS485 V A Ao V A AO4 AO1 V A T L+ V A AO3 BUS AO2 45 x 85 x 75mm -15 to +55°C non condensing T 120g dimensions operating conditions Ai V A - 0,6..0,8 Nm screw tightening torque weight + SLS-500-AI-AI analogue I/O module (current) SLS-500-AI-AI ordering information part no type supply input inp. galv. iso.* output outp. galv. iso.* housing types SLS-500-AI-AI-C local 24V= 4x 0-20mA no 4x 0-20mA no C SLS-500-AI-AI-D remote 24V= 4x 0-20mA no 4x 0-20mA no C * The ordering information for various sensors you will find on page 03:23 * measurement input galvanically isolated from the power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:15 overview analogue I/O expansion module supply voltage 24V= 4 4 analogue inputs 0-20mA in 4 analogue outputs 0-10V RS485 interface 1 potentiometer 4 pre-programmable timer functions local out 45mm DIN rail mount housing U 0-10V I 4-20mA specification DIN remote supply voltage 24V= ±10% power consumption 0,5W nominal 0 - 10V= max. 2mA analogue output spec. resolution RS485 repeat accuracy V A V A Ai AI4 AI3 AI2 M- T ROM resolution input resistance 12 bit 0 - 10V= 250 Ohm terminals IP20 housing IP50 screw tightening torque pozidrive 1 0,6..0,8 Nm weight 120g dimensions 45 x 85 x 75mm -15 to +55°C non condensing operating conditions RS485 Ao V A AO4 V A AO3 AO1 V A T L+ V A AO2 BUS 0,1% ±0,5% screws V A - 10 bit precision analogue input spec. protection class V A AI1 SLS-500-AI-AU analogue I/O module SLS-500-AI-AU + ordering information Gehäusetypen inp. galv. iso.* output outp. galv. iso.* part no type supply input SLS-500-AI-AU-C local 24V= 4x 0-20mA no 4x 0-10V no C SLS-500-AI-AU-D remote 24V= 4x 0-20mA no 4x 0-10V no C housing types * The ordering information for various sensors you will find on page 03:23 * measurement input galvanically isolated from the power supply 3:16 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview analogue I/O expansion module supply voltage 24V= 4 4 analogue inputs 0-10V in 4 analogue outputs 0-20mA RS485 interface 1 potentiometer pre-programmable timer functions 4 local 45mm DIN rail mount housing out U 0-10V I 4-20mA specification supply voltage power consumption 24V= ±10% 0,5W nominal analogue output spec. resolution 0 - 10V= max. 2mA RS485 0,1% ±0,5% 0 - 20mA input resistance protection class 12 bit 50 kOhm terminals screws IP50 housing pozidrive 1 screw tightening torque 0,6..0,8 Nm weight 120g dimensions operating conditions -15 to +55°C non condensing V A IP20 V A V A AI3 AI4 M- T 45 x 85 x 75mm Ai V A AI2 ROM RS485 V A V A Ao AO1 V A T L+ V A AO4 BUS AO3 analogue input spec. resolution 10 bit AO2 precision remote AI1 repeat accuracy DIN SLS-500-AU-AI analogue I/O module SLS-500-AU-AI + ordering information part no type supply input inp. galv. iso.* output outp. galv. iso.* housing types SLS-500-AU-AI-C local 24V= 4x 0-10V no 4x 0-20mA no C SLS-500-AU-AI-D remote 24V= 4x 0-10V no 4x 0-20mA no C * The ordering information for various sensors you will find on page 03:23 * measurement input galvanically isolated from the power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:17 overview serial I/O interface expansion module DIN supply voltage 24V= 2 open-protocol serial ports can be used as RS232 or RS485 the following baud rates are available: 1200, 2400, 4800, 9600, 19200, 38400 status LED for RS232 RS485 pre-programmable timer functions remote 45mm DIN rail mount housing Programming RS232 Title: Initialization Possible Modes for SIO1 and SIO2: SIO1_BAUDRATE SIO1_BAUDRATE 19200 19200 SIO1_MODE SIO1_MODE 0x01 0x01 9600 9600 SIO2_BAUDRATE SIO2_BAUDRATE 0x0B 0x0B SIO2_MODE SIO2_MODE 8,N,1=0x01 7,N,1=0x00 8,N,2=0x09 7,N,2=0x08 8,E,1=0x03 7,E,1=0x02 8,E,2=0x0B 7,E,2=0x0A 8,O,1=0x05 7,O,1=0x04 8,O,2=0x0D 7,O,2=0x0C Possible Baudrates for SIO1 and SIO2 1200 2400 4800 9600 19200 38400 specification supply voltage power consumption Connection to a PC (9 pin SUB-D socket): Programming/ Device1 Sub-D 24V= ±10% 0,5W nominal protection class terminals screws housing IP50 pozidrive 1 IP20 screw tightening torque 0,6..0,8 Nm weight 140g dimensions operating conditions 45 x 85 x 75mm -15 to +55°C non condensing M- => PIN 5 Tx1 => PIN 2 Rx1 => PIN 3 Tx1 Rx1 RS232 Boot Rx2 - Tx2 Device2 SLS-500-SIO M- SLS-500-SIO serial I/O interface module SLS-500-SIO RS232 B1 A1 Device1 B2 A2 M- RS485 + Device2 L+ RS485 ordering information part no type supply input SLS-500-SIO-D remote 24V= - SLS-550-SIO-D remote 24V= - Gehäusetypen inp. galv. iso.* output outp. galv. iso.* - - - housing types C C SLS-500-PC-RS232-SIO download cable * measurement input galvanically isolated from the power supply 3:18 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview GSM (Text) modem interface expansion module supply voltage 24V= connection to a SIEMENS TC35 GSM-terminal SMS (Text) message sending on the basis of a GSM protocol received SMS will perform control functions DIN RS485 remote LED indicators for RS232 RS485 interface RS232 45mm DIN rail mount housing For instance use with: Siemens TC35 GSM-module + aerial + cable (see below): specification pozidrive 1 screw tightening torque weight 0,6..0,8 Nm 140g dimensions 45 x 85 x 75mm -15 to +55°C non condensing M- - RS232 programming SLS-500-SMS Sub-D M- => PIN 5 Tx1 => PIN 2 Rx1 => PIN 3 Tx1 operating conditions Connection to a PC (9 pin SUB-D socket): Rx1 IP50 screws Boot IP20 housing GSM-Modem TC35 0,5W terminals protection class Tx2 24V= ±10% power consumption Rx2 supply voltage RS232 A1 M- B1 A2 B2 L+ RS485 RS485 + ordering information part no type supply input SLS-500-SMS-D remote 24V= - SLS-500-PC-RS232-SIO TC35 output - outp. galv. iso.* - housing types C connecting cable SLS-500-TC35-SMS TC35-PS inp. galv. iso.* - SLS-500-SMS interface module for GSM modem SLS-500-SMS download cable power supply cable for TC35 GSM module and aerial * measurement input galvanically isolated from the power supply HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:19 SLS-500-GW Gateway SLS-500-GW overview Gateway expansion module supply voltage 24V= DIN remote RS485 Gateway for EnOceon Radio Receiver Gateway for SLS-500-MBUS up to 4 values Gateway for Dali-Lighting controls SLS-500-GW SLS-500-GW RS232 and RS485 interface 45mm DIN rail mount housing RS232 specification supply voltage 24V=±10% power consumption 0,5W protection class SLS-500-GW terminals IP20 housing IP50 screws pozidrive 1 screw tightening torque 0,6..0,8 Nm weight 140g dimensions operating conditions 45 x 85 x 75mm -15 bis +55°C non condensing ordering information part no type supply housing types SLS-500-GW-D remote 24V= C *measurement input galvanically isolated from the power supply 3:20 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS SLS-500-T1 button and LED expansion module SLS-500-T1 overview button and LED expansion module supply voltage 24V= over bus connection RS485 Ideal for industrial and building automation 8 free programmable buttons 8 free programmable LEDs Each LED can display 4 states Connectable as an expansion module on every SLS-500-CAN base module Free selectable label for every button and LED Print design for customer specific applications available specification Programming Title: Programming R1.LED1A R1.LED1A LED1 LED1 green green R1.KEY2 R1.KEY2 Key2 Key2 R1.LED2A R1.LED2A LED2 LED2 green green R1.KEY3 R1.KEY3 Key3 Key3 R1.LED2B R1.LED2B LED2 LED2 red red 11 11 nominal voltage +10% / -15% duty cycle protection class 100% IP54 (front) weight 660g dimensions width height 195mm 110mm depth operating conditions -20 bis +40°C non condensing 40mm TOGGLE:R1.LED1A TOGGLE:R1.LED1A LED1 LED1 green green R1.KEY1 R1.KEY1 Key1 Key1 Error Error supply voltage In In Reset Reset Time1 Time1 Time2 Time2 Out Out TIMER TIMER Recycler Recycler Hi Hi R1.LED1B R1.LED1B LED1 LED1 red red R1.LED3B R1.LED3B LED3 LED3 red red ordering information part no type SLS-500-T1-D remote SLS-500-T1-D-A remote remote SLS-500-T1-D-AP 3:21 supply 24V= Gehäusetypen construction print housing type special 24V= print with Alu-front special 24V= print with Alu-front and housing special HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS overview MBUS-MODBUS-protocol-converter allows you to read of MBUS-counter via Modbus-RTU Up to 8 counter per converter readable Readout interval adjustable Readout of the counter values via Modbus register with RS232 or RS485 interface DIN RS485 easy programming via Windows-Utility It is also possible to upgrade the counter definitions by your own RS232 specification supply voltage power consumption 24V=±10% 0,5W nominal Modbus-interface RS232 or RS485 Modbus-RTU MODBUS-RTU-Master (z.B.: SPS, PC, ....) 9600 to 57600 Baud, MBUS-interface 8 data bits, no parity,1 stop bit max. 8 members á 1,5 mA per member -RTU IP50 screws screw tightening torque weight dimensions pozidrive 1 operating conditions -15 bis +55 °C non condensing 0,6..0,8 Nm 80g - counter 22,5 x 75 mm ordering information part no interface supply (max. 1,5mA per counter housing RS232/RS485 up to 8 counter per converter protection class 300 to 38400 Baud, 8 data bits, no parity,1 stop bit max. cable length 350m terminals IP20 SLS-500-MBUS protocol converter SLS-500-MBUS Gehäusetype housing types SLS-500-MBUS-232 RS232-Modbus RTU 24V= A SLS-500-MBUS-485 RS485-Modbus RTU 24V= A SLS-500-PC-RS232-SIO configuration cable for SLS-500-Mbus-RS232 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:22 overview Modbus converter expansion module supply voltage 24V= RS232 RS232 / modbus converter the following baud rates are available: 9600, 19200, 38400 you can choose a modbus address from ID 0x0000 - ID 0x7F RS485 SLS-500-Configurator configuration cable and SLS-500 cable are delivered with the modbus converter LED indicators for receiving (Rx) and transmission (Tx) 45mm DIN rail mount housing Configuration: S4 8 R 32 5 SLS-500-Configurator is available for programming and configuration: : R S2 DIN specification supply voltage 24V= ±10% 1W nominal 9600 baud SLS-500-memory type modbus power consumption settings SLS used addresses 0x0000 to Config/RS232 - 0x0000 to Tx1 Boot Rx1 Rx2 Tx2 0x7F M- SLS-Universal interface converter SLS-500-Modbus RS232 0x7F terminals protection class housing dimensions Modbus Do not connect a module to A1 and B1 during SLS-ModbusConverter configuration analogous-variables IP20 IP50 0,6..0,8 Nm 120g weight + bit-variables pozidrive 1 screws screw tightening torque A1 M- B1 B2 A2 L+ Modbus } } 45 x 85 x 75mm -15 to +55 °C non condensing operating conditions Modbus is a protocol based on Master/Slave architecture which has been developed for industrial control networking. Due to the trouble-free exchange of data between Modbus and a wide range of serial interfaces, this system has widespread consumer acceptance. part no SLS-500-Modbus-Conv. supply input 24V= - ordering information inp. galv. iso.* - Gehäusetypen output outp. galv. iso.* - - housing types C * measurement input galvanically isolated from the power supply 3:23 HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS Accessories Accessories rain sensor wind sensor outdoor sensor cable sensor surface-contacting sensor ordering information part no supply rain sensor RM1 24Vdc/Vac relay NO/NC 30V/4A wind sensor WS1 24Vdc 0...10Vdc part no with silicon cable weather station temperature sensor passive output output measuring range 0,7...40m/s measuring range cable surface -contacting sensor ALTF1-PT1000 no PT1000 cable surface-contacting sensor ALTF1-PT1000-S yes PT1000 -30...+180°C surface-contacting sensor ALTF2-PT1000 no PT1000 -30...+110°C outdoor temperature sensor ATF1-PT1000 -50...+90°C HTF-PT1000 no no PT1000 cable temperature sensor PT1000 -10...+105°C cable temperature sensor HTF-PT1000-S yes PT1000 -50...+180°C temperature sensor active part no voltage output 0..10Vdc sensor surface-contacting sensor ALTM2-U PT1000 outdoor temperature sensor ATM1-U PT1000 temperature sensor active part no current output 4..20mA sensor surface-contacting sensor ALTM2-I PT1000 outdoor temperature sensor ATM1-I PT1000 light intensity sensor part no voltage ouput 0..10Vc sensor -10...+105°C measuring range -50..+50°C 5 ranges adjustable -50..150°C measuring range -50..+50°C 5 ranges adjustable -50..150°C measuring range Brightness sensor AHKF-0,5-U 0...500Lux outdoor light intensity sensor AHKF-60-U 0...60000 Lux Light intensity sensor part no current output 4..20mA sensor measuring range Brightness sensor AHKF-0,5-I 0...500Lux outdoor light intensity sensor AHKF-60-I 0...60000 Lux * At request are also other sensor types and measuring ranges available HIQUEL 2009 X01.00 HIGH QUALITY ELECTRONICS 3:24