Transcript
: Hookup for Playback and VCR Recording Before hookup Check your tuner This DVD-VCR does not include a tuner. To record TV programs on the DVD-VCR from a connected device, you need to connect the DVD-VCR to a tuner that has audio/video output jacks.
SLV-D380P SLV-D281P
You have :
Cable Box With Video/Audio Output See below – or – Satellite Receiver With Video/Audio Output hint If you have been using your VCR connected to an antenna, connect this DVD-VCR to the VCR using an audio/video cord. This way, you can record TV programs.
Follow the three steps below to connect, setup and make recordings on your DVD-VCR.
If you have neither of the above tuners : You have :
Cable Box/Satellite Receiver Without Video/Audio Output
Please contact your cable service or satellite service company to ask cable box or satellite receiver with video/audio output.
Cable With No Cable Box
Please contact your cable service to ask cable box with video/ audio output.
Antenna Only (No Cable TV/No Satellite Receiver)
You need to subscribe to a cable TV or satellite TV service and to get a cable box or satellite receiver with video/audio output.
©2007 Sony Corporation
3-093-966-11(1) AK68-01306A
Printed in China
hint For any inquiry, please visit the Sony web site : http://esupport.sony.com/
You will need:
Select a connection
A
To enjoy DVD/VCR playback, select connection A. In addition, if you want to record TV programs from a connected tuner, make additional connections by referring to connection B.
B
X2
(one audio/video cord is supplied)
X2
(antenna cable: not supplied)
TV
DVD-VCR
: Hookup for Playback You will need:
LINE IN
LINE OUT
DVD Only
IN
(FROM ANT) LINE OUT
R AUDIO L
COMPONENT Pr
L
OUT
(TO TV)
RF
VIDEO OUT
Y DIGITAL AUDIO
OUT OUT S VIDEO
AUDIO Pb
R
COAXIAL
VIDEO
A
Cable Box / Satellite Receiver
X1
(one audio/video cord is supplied) CAVLE IN
OUT TO TV
VIDEO/ AUDIO OUT
TV
DVD-VCR
LINE IN
LINE OUT
DVD Only
IN
(FROM ANT) LINE OUT
R AUDIO L
L
OUT
RF
(TO TV)
COMPONENT Pr
VIDEO OUT
Y DIGITAL AUDIO
OUT OUT S VIDEO
AUDIO R
Pb
LINE IN 1
VIDEO/AUDIO
COAXIAL
VIDEO
OUT
LINE OUT
LINE OUT
IN
A
A LINE IN 1
LINE
LINE IN
Wall Jack CABLE OUT TO IN TV
A
B
VHF /UHF IN
B
Connect all power cords last!
Connect all power cords last! go to
go to
Plug the DVD-VCR power cord into an AC outlet.
Display pictures on the TV 1
Select DVD or VIDEO
Press / to turn on the DVDVCR and turn on your TV.
Which do you want to use?
2 Switch the TV input using the
TV’s remote (usually INPUT or TV/VIDEO) so that the signal from the DVD-VCR appears on the TV screen.
TV
SELECT DVD VIDEO
Clock set
1
The “Clock Set” setup allows you to make clock settings for the recorder.
1
Press SET UP, then press / to select OPTION and press ENTER.
2
Language Clock Set/Adjust Auto Power Off
:
English
CH/ TRACKING
3
5
6
7
8
9
AUDIO
Press SELECT VIDEO. “VIDEO” is lit in the display window.
Record a TV program from the connected device 1 Press SELECT VIDEO to control the VCR.
MUTING/ ZOOM
REPEAT/ SEARCH TV/VIDEO
3 Press INPUT SELECT to select a input source.
6 Press REC.
SUBTITLE/ INPUT TIMER SURROUND SELECT
REPLAY SKIP
VIDEO
REC
SP/EP
SHUTTLE PREV NEXT
4 Select a channel on your cable box or satellite receiver.
PROGRAM
RETURN
SETUP
2 Press / to select “Clock Set/
PLAY
PAUSE
STOP
Adjust,” and press ENTER. Language Clock Set/Adjust Auto Power Off
:
Press STOP.
English [Off]
ENTER
DVD
Record a TV program form the connected device using the timer
VIDEO
PROGRAM
ENTER
RETURN
SETUP
DISPLAY
3
Press / to set the time, and press . Set the date and year in sequence. The day of the week is set automatically. Time 12 : 00 AM
Date 1 / 01
Year 2007
Mon
DVD
VIDEO
PROGRAM
ENTER
RETURN
TOP MENU
RETURN MENU
1 Press SELECT VIDEO to control the VCR.
2 Insert a tape with its safety tab in place.
CLOCK SET/ADJUST OPTION
Keep the channel you want to record set on your cable box or satellite receiver, and leave it turned on. To stop recording
OPTION SETUP OPTION
speed, SP (Standard Play) or EP (Extended Play).
[Off]
DVD
ENTER
5 Press SP/EP to select the tape
in place.
ENTER
ANGLE
Press SELECT DVD. “DVD” is lit in the display window.
2 Insert a tape with its safety tab
0
OPTION SETUP OPTION
VIDEO
4
SET UP
For operating the VCR
DVD
VOL
CLEAR
For operating the DVD player
3 Press TIMER. L1/L2
START
END
---------
-- : --- : --- : --- : --- : --- : --- : --- : --
-- : --- : --- : --- : --- : --- : --- : --- : --
DATE ---------
SPEED
---------
---------
SETUP
4 Press ENTER to start the clock.
menu.
The indicator appears in the display window and the VCR stands by for recording. Timer recording will operate properly regardless if the DVD-VCR is turned on or off.
8 Keep the channel you want to
record set on your cable box or satellite receiver, and leave it turned on.
To cancel the setting
RETURN
Press CLEAR in STEP 4.
4 Set L1 or L2, start and stop
times, date, and tape speed. Press / to select each item, and / to set it.
5 Select a channel on your cable box or satellite receiver.
hint Don’t know which device you are operating? If the remote does not seem to function, you may be operating your TV, not the DVD-VCR. Set the TV/DVD-VIDEO switch on the remote. Also, some buttons work only for the DVD player or the VCR. Be aware of the one you are controlling: check the “DVD” or “VIDEO” indicator in the display window and select by pressing SELECT DVD or SELECT VIDEO.
7 Press RETURN to exit the
6 Press to confirm the setting. L1/L2 L1 --------
START 1 0 : 0 0 AM -- : --- : --- : --- : --- : --- : --- : --
END 1 2 : 0 0 AM -- : --- : --- : --- : --- : --- : --- : --
DATE
SPEED
10 / 13 -- --- --- --- --- --- --- --
Auto --------
RETURN
CLEAR
hint Why is the indicator flashing in the display window? The indicator flashes when a timer setting is set with no tape to record on. Insert a tape with its safety tab in place.
