Transcript
L A U N
SM 600XLR
S
INDEX: 1........................................................................................Safety Information
N
T
R
U
C
T
I
O
N
M
A
Wired Microphone
3........................................................................................Connections
I
2........................................................................................Features 4........................................................................................Maintenance 5........................................................................................Service 6........................................................................................Technical Specifications. .
SM 600XLR High quality microphone specially designed with three special operational modes for perfect speech and vocal reproduction.
Safety Information •
Protect the microphone from moisture, liquids, fire and sudden impacts. Exposing it to such elements could damage the microphone.
•
Do not blow into the microphone to test/check the same. It is advisable to carry out a speech trial.
•
When using wired microphones always ensure that the microphone cable is laid so that it does not present a hazard.
Features •
1
2
3 operational modes for quick sound variation.
3
-7 db
1) Low Cut: Use this mode for a quick Low roll-off. This mode reduces unwanted low frequencies & enhances mids.
(Selectivity switch for the 3 operational modes)
2) Flat: This mode simply bypasses all kind of attenuation. Use this mode for a fuller more natural tone. 3) -7dB: This mode reduces the sensitivity of the microphone. Use this mode to reduce ‘Proximity Effect’ & unpleasant ‘Pops’. •
Extra wide frequency response (30Hz~16KHz) designed to suit every professional vocal applications.
•
Dynamic super- cardioid pickup pattern minimizes off-axis pick-up, reduced feedback and higher system gain.
•
Suspended cartridge shock-mount system, to minimize handling noise.
•
Low-failure magnetic on-off switch.
•
Rugged body and dent-proof steel grill that withstands, physical shocks.
•
Comes with a 6.5M flexible XLR-Jack cable, leatherette bag, mic holder & plastic case.
Connection The SM600XLR is supplied with a 3-pin XLR Plug to connect to any microphone input (on a professional mixer, amplifier, processor etc).
Maintenance For cleaning the microphone body and basket use a soft, damp cloth. If necessary use a mild cleansing agent. No solvent agents should be used. Take care not to allow any water into the microphone.
Service In the unlikely event of equipment failure, kindly contact your Studiomaster Professional Dealer/Distributor.
2
Frequency Response Curve Flat Mode
Low Cut Mode SM 600XLR
0°
180°
-7dB Mode
Polar Pattern
0 30
330 300
60
270
90
240
120 210
150 180 3
Technical Specifications: Transducer type
Dynamic
Operating principle
Dynamic mic style
Frequency response
30Hz~16KHz
Sensitivity
-50dB ±3dB(at 1KHz)
Sensitivity Pad
-7dB(at 1KHz)
Low Frequency Pad
-5dB(at 100Hz)
Polar pattern
Super-Cardiod
Rear attenuation at 1 kHz
15dB
Open circuit voltage at 1 kHz
3.16mV
Nominal impedance
350 O ±30%
Connection
3-pin XLR male
Dimensions Length
210mm
Shaft diameter
50 x 25mm
Head diameter
55mm
Weight without cable
315gms
Accessories included
6.5M XLR-F to XLR-M mic cable, leatherette bag, mic holder, plastic case + color sleeve packaging.
*Design and specification are subject to change without notice.
is a registered trademark of Audioplus in India. © Copyright Audioplus, 2008. All rights reserved. Any unauthorised reproduction or use of logos, images or design elements is strictly prohibited by law. No part of the compilation may be reproduced in any manner or translated without written permission.
B r o u g h t
t o
y o u
b y :
A1/A2, Giriraj Industrial Estate, Mahakali Caves Road, Andheri (East), Mumbai - 400 093. India Tel.: 022 - 30880743 / 776 Fax: 022-26871453 E
[email protected] W www.audioplus-india.com
