Transcript
Reed Contact Magnetic Sensors Ø 12 REED CONTACT MAGNETIC PROXIMITY SENSORS • • • •
Metal and plastic housing 2 µS delay on activation 2 m integral cable Choiche of magnets
SM Series
Identification code
Wiring diagrams
07
SM
NO CONTACT
SERIES SM BROWN
NO - Length 30mm NO + NC - Length 30mm POWER NO - Length 30mm POWER NO - Length 70mm POWER NO+NC - Length 30mm NO - Length 100mm - plastic POWER NO - Length 100mm - plastic BISTABLE - Length 100mm - plastic
07 08 09 13 14 19 21 22
MAX. VOLTAGE MAX. CURRENT POWER SWITCHING FREQUENCY DELAY ON ACTIVATION REPEATABILITY TEMPERATURE LIMITS PROTECTION DEGREE CABLE LENGTH CABLE SECTION HOUSING MATERIAL
BLUE (2) (1)
NO + NC CONTACT BLUE
(3)
BROWN
(2)
BLACK (3)
230 V AC 0.5 A 10 W/VA 200 Hz 2 mS ± 0.3 mm -25 ÷ +70°C IP 67 2m 3 x 0.50 mm2
Reed contact sensor / magnet switching distance (mm) DIAMETER 12 Distance Hysteresis
24 12 (Power)
5 7 (Power)
22 10 (Power)
5 6 (Power)
6 0 (Power)
2.5 0 (Power)
22 22 (Power)
9 9 (Power)
20 20 (Power)
9 9 (Power)
MG01
MG02
Nickel-plated brass
(1) Power: 100W; l=3A (2) Power: 50W; l=1A (3) Power: 60W; l=3A
MG03
Plastic housing models dimensions (mm) MG04
MG05
WARNING: The data specified in this table have an approximate value because they depend on the magnet position, on the material on which it is applied (ferromagnetic or not) and because they are related to the magnet during the frontal approach. Reed contact sensors can be also activated laterally considering that switching distances are always influenced by the magnet position and orientation besides the material on which it is applied (ferromagnetic or not).
100
Magnets dimensions (mm) MG02 (Ferrite)
M5
MG01 (Ferrite)
4
7
40
10
22
MG03 (Alnico in aluminium housing)
18
7
12
42,5
6 10,5
3
8
63
20
10
MG04 (Ferrite in plastic housing)
32 6
LONG HOUSING
MG05 (Ferrite in plastic housing)
10
20
9 16
43
SHORT HOUSING
52
Metal housing models dimensions (mm)
33
15
18 27
4
10
3,2
70
7,5
2,5 2,5
15,5
9
6 3,2
www.siesamx.com
[email protected]
To locate additional product specifications and technical drawings go to www.asi-ez.com Automation Systems Interconnect, Inc.
l
P.O. Box 1230
l
Carlisle, PA 17013-1230
l
Phone (717) 249-5581 or (877) 650-5160
l
Fax (717) 249-5542
