Preview only show first 10 pages with watermark. For full document please download

Sma Dc Instructions E1 060712_final (, 633 Kb)

   EMBED

Share

Transcript

Easy Fit EF-Series Alarm System Wirefree 433MHz Yale EF-DC Door/Window contact Knockouts Sensor Yale LED Magnet Learn/Test button Gap no more than 10mm Description: • Learn/Test Button: Use for testing the radio performance and for learning-in. • LED Indicator • Knockouts for Wall / Corner Mounting • Jumper (on PCB)= Supervision Enable / Disable Jumper • Magnet Pack contents • 1 x Door/Window contact • 2 x wall plugs & screws • 2 x Adhesive pads Programming & Location Program your door/window contact before installation and test afterwards. Please see your current system instruction book Locate the Door/Window contact accessory taking into account the following points: • Mount as high as possible • Do not aim a PIR at this door or window Installation The Door/Window contact can be either screw Please see the kit manual for instruction. Supervision Enable/Disable Jumper 2 If enabled, the DC will automatically transmit Supervisory signals periodically to the Control Panel at random intervals. The Control Panel needs to enable supervision before it can monitor these periodic signals. Jumper On= Supervision Disabled (Default) Jumper O = Supervision Enabled Environmental conditions: -10c to 40c , relative humidity 85% noncondensing. Indoor use only Radio: 433MHz 2 Year Warranty: E1 09/12 For the full Warranty statement please refer to the EF-IPBox manual or visit wwwsecurity-merchants.com Note: Waste electrical products and batteries should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. RoHS