Transcript
AC-S6T
AcousticCoverage™ Series AC-S6T
Small format, surface mount loudspeaker Features • High quality transducers provide exceptional clarity through the critical voice range. • Improved musicality often not seen in typical BGM class products. • Ported baffle for increased low frequency extension down to 70 Hz. • Low saturation 70/100V transformers with 8 ohm bypass. • 4-pole Euroblock connector eases system wiring. • Advanced voicing via QSC Intrinsic Correction™, applied using Q-Sys processing or CXD amplifier platforms. • Available in black (RAL 9011) or white (RAL 9010) • Complete EASE, CAD & BIM information available online
Wide Area Paging ∙ Background Music ∙ Office Buildings ∙ Healthcare Facilities ∙ Concourses ∙ Transportation Terminals ∙ Ancillary Support in Larger Systems The QSC AcousticCoverage™ AC-S6T is a surface mounted 6.5” two-way loudspeaker with 70/100V transformer, suitable for a wide variety of voice paging and background music sound reinforcement applications. AcousticCoverage™ is designed to offer integrators a cost effective solution for applications where voice reinforced coverage is of primary concern, while providing improved musicality often not seen in typical BGM class products. A high quality 165 mm [6.5 in] polypropylene cone transducer with butyl rubber surround and a 25 mm [1 in] aluminium dome tweeter offers pristine clarity through the critical vocal range for increased speech intelligibility. With 130 degrees of conical coverage, the AC-S6T reduces the number of loudspeakers required for even coverage in close proximity. The UV treated high impact ABS enclosure and ported baffle assembly has been optimally tuned for added musicality, creating low frequency extension down to 60 Hz. To maintain this frequency response, the AC-S6T utilizes a 30-watt lowsaturation and low-loss 70/100V transformer with varying selectable taps, including an 8Ω bypass.
To further enhance performance and speed of install with optimum result, advanced voicing via QSC Intrinsic Correction™ techniques are obtainable using Q-Sys™ networked audio processing platforms, including CXD amplifiers for a complete QSC systems solution. Installers will appreciate the 4-pole Euroblock connector for loop thru wiring, located on the rear of the enclosure. Eliminating the termination hassles of star topology wiring designs, the generous Euroblock of the AC-S6T can accept four 18AWG pairs. The AC-S6T features brass inserts to accept the included yoke mount and is secured using the supplied thumb bolts. The grille is adorned with a spring loaded and rotatable logo for installation convenience in either horizontal or vertical deployments. The AC-S6T is available in white (RAL 9010) or black (RAL 9011) to match complimenting QSC product families . The AC-S6T may also be painted to match any décor. To assist in successful systems integration, complete EASE, CAD, and BIM files are available for download online.
AC-S6T Details Beamwidth:
Impedance / Frequence Response:
Sound Pressure, Level (dB)
200
100 70
95
72
90
64
85
56
80
48
70
32
65
24
60
16 8
55
50
50
500
1k
2k
5k
10k
20
100
200
500
1k
2k
5k
0 20k
10k
Frequenc y (H z) Frequency Response (Raw)
Horizontal
Frequency Response (Intrinsic Correction™)
Vertical
Dimensions:
50
20k
Frequenc y (H z)
7
Impedance, Amplitude (ohm)
300
Beamwidth (-6 dB) (deg)
80
100
400
Impedance (8 Ohm Bypass)
6
5
4
3 Specifications:
2
1 REVISIONS
REV ECO System Details A Effective frequency range1
218 mm [8.6 in] 197 mm [7.8 in]
DESCRIPTION AC-S6T PRODUCTION RELEASE
BY MJ
60 Hz – 20 kHz
Rated noise power / voltage2
30 watts / 15.5 volts (rms)
Broad-band sensitivity3
86 dB SPL
Coverage angle (-6 dB)
130° conical (500 Hz - 5 kHz)
Directivity factor (Q)
6
Directivity Index
8 dB
Maximum continuous SPL4
101 dB
Maximum peak SPL4
107 dB
Rated impedance
8 ohms
Recommended amplifier
60 watts
Transformer taps
Input connector type
70 V: 30, 15, 7.5, 3.7, 1.9 watts 100V: 30, 15, 7.5, 3.8 watts 8 ohm bypass 165 mm [6.5 in] Polypropylene woofer 25 mm [1 in] voice-coil 25 mm [1 in] Aluminium dome tweeter 25 mm [1 in] voice-coil Euroblock connector with parallel output
Enclosure material
UV treated, high impact ABS polymer
Grille material
Powder coated steel
Yoke material
Powder coated steel, brass inserts
LF transducer HF transducer
EFF DATE
01-20-15
D
C
Enclosure Details 303 mm [11.9 in]
215 mm [8.5 in] FRONT VIEW
Ingress protection
IP-44
Operating environment
Designed for indoor use
Operating Temperature Range Net weight
-20 to 50° C [-4 to 122° F] 3.8 kg [8.3 lb]
Product dimensions
303 x 215 x 197 mm [11.9 x 8.5 x 7.8 in]
Shipping weight
8.4 kg [18.6 lb] (pair packed)
Shipping dimensions
359 x 267 x 470 mm [14.1 x 10.5 x 18.5 in] (pair packed)
B
Included accessories Yoke mount system, euroblock connector 1 Free-field, -10 dB from on-axis sensitivity 2 IEC60268-1 noise signal for 2 hours 3 On-Axis, free-field sensitivity, 2.83V, 1 m 4 Calculated from rated noise voltage and sensitivity REAR VIEW
3 PM-000412-00 2 PM-000842-00 1 WP-040004-00 ITEM PART NUMBER
2 1 2 QTY
POLYBAG, 12"X16"X3 MIL. THICK SHIPPING CARTON SPEAKER ASS'Y, AC-C4T
DESCRIPTION
BILL OF MATERIALS APPROVALS TOLERANCES ARE:
DRAWN
M. JEN CHECKED
M. JEN
MATERIAL
MFG ENG
M. JEN
QA CHECK
FINISH
M. JEN DRAWING INFO: MODEL INFO:
7
6
DATE (DD-MMM-YY)
10 10
10 10
18 18
/ 14
18
/ 14
18
/ 14
AC-S6T, SURFACE MOUNT SPEAKER CAGE CODE
SIZE
FG-060004-00
D
FG-060004-00
SCALE:
00PW4 1.5
DRAWING NO.
FG-060004-XX
DO NOT SCALE DRAWING
1675 MacArthur Boulevard • Costa Mesa, CA4 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174 5 3 2 © 2015 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. AcousticCoverage, DMT, Intrinsic Correction and Q-Sys are trademarks of QSC.
AC-S6T Spec Sheet 04/02/2015
A
QSC AUDIO PRODUCTS, LLC
1675 MACARTHUR BOULEVARD COSTA MESA, CA 92626
/ 14
SHEET
1please
REV
2 1 OF 1
recycle
