Transcript
Cat
®
914K
COMPACT WHEEL LOADER
FEATURES: Cat® Optimized Z-bar Loader Linkage – The new Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control. A High Lift version is also available. Work Tools – A new line of optimized Performance Series Buckets and high visibility pallet forks enhance productivity whether Pin-On, Integrated Toolcarrier (IT) or ISO (wide). Legacy coupler tools such as brooms, grapple buckets, multipurpose buckets and others remain compatible. Hydraulics and Controls – State of the art electrohydraulics provide low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator tunes for fine modulation or aggressive loading in one button.
Tuned Drivetrain – Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth and aggressive with one button. Cab – New, high visibility cab increases comfort with an available deluxe seat, intuitive controls and settings. Optional soft touch pad contains new electronic functions and settings including Implement Modulation and Hystat Aggressiveness, Ride Control, Return To Dig, Lift Kickout, Engine Speed Control, and Rim Pull Control. Built-in security on-board. Serviceability – Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.
Specifications Engine Engine Model Maximum Gross Power: SAE J1995 ISO 14396 Rated Net Power: SAE J1349 ISO 9249/EEC RPM at Rated Power Rated Torque Peak Torque Torque Rise RPM at Peak Torque Bore Stroke Displacement
Operating Specifications Cat C3.8 73 kW 72 kW
97 hp 97 hp
Non-Pneumatic 69 kW 72 kW 2,400 RPM 321 N·m 336 N·m 17% 1,500 RPM 100 mm 120 mm 3.8 L
92 hp 96 hp 237 lbf-ft 248 lbf-ft
3.9 in 4.7 in 231.8 in3
• The Cat C3.8 Turbo Electronic engine meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards.
Weights Operating Weight: Standard Lift High Lift
Tire Size: Standard Optional
8126 kg 8181 kg
17,910 lb 18,030 lb
• 914K with 1.5 m3 (2.0 yd3) bucket with bolt-on cutting edge.
Rated Bucket Capacity Breakout Force Full Turn Static Tipping Load: Standard Lift High Lift Dump Height @ Full Lift: Standard Lift High Lift
17.5-25 12PR 17.5-25 16PR 17.5-R25 53.5×9×16.5 (15.5/17.5×25 equivalent) 1.5 m3 2.0 yd3 78.3 kN 17,589 lbf 5504 kg 4412 kg
12,130 lb 9,722 lb
2820 mm 3174 mm
111.0 in 125.0 in
10 km/h 20 km/h 40 km/h
6.3 mph 12.5 mph 25.0 mph
Transmission Maximum Travel Speed: Low Range, Speed Range 1 Low Range, Speed Range 2 High Range
914K Compact Wheel Loader
Cab ROPS FOPS Sound, Enclosed Cab
Bucket Capacities
SAE J394, SAE J1040, ISO 3471 SAE J231, ISO 3449 75 dB(A)
General Purpose Bucket: Pin-On IT
Hydraulic System Main Relief Pressure Pump Flow Cycle Time: Lift Dump Rackback Float Lower, Float Lift Cylinders: Bore Diameter Rod Diameter Stroke Tilt Cylinder: Bore Diameter Rod Diameter Stroke
280 bar 125 L/min
4,061 psi 33 gal/min
ISO Multipurpose Bucket: IT
5.3 seconds 1.8 seconds 2.4 seconds 3.7 seconds 4.0 seconds
Material Handling Bucket: IT
100 mm 60 mm 593 mm
3.9 in 2.4 in 23.3 in
Coal Bucket: IT
100 mm 60 mm 578 mm
3.9 in 2.4 in 22.8 in
Carriage Forks: IT ISO
1.1 m3 1.6 m3
1.5 yd3 2.1 yd3
1.7 m3 2.2 m3 2.5 m3
2.3 yd3 2.9 yd3 3.3 yd3
2.5 m3
3.3 yd3
1550 mm 1550 mm
61 in 61 in
1050 mm 1220 mm 1350 mm
41 in 48 in 53 in
1220 mm 1220 mm
48 in 48 in
2000 mm 2370 mm 3940 mm
79 in 117 in 155 in
Fork Tines Lengths Fork Tine:
40° 60 mm 35 mm 400 mm
2.4 in 1.4 in 15.7 in
84 L/min 22 500 kPa
22.2 gal/min 3,263 psi
37 107 N·m 29 276 N·m
27,369 lbf-ft 21,593 lbf-ft
Fork Tine: 50 mm (2 in) Left Hand Offset 50 mm (2 in) Right Hand Offset
Material Handling Arm Length Material Handling Arm: Retracted Mid Extended
2.8 seconds 3.75 turns 5.75 turns
Service Refill Capacities Cooling System Fuel Tank Hydraulic System Hydraulic Tank (refill)
1.7 yd3 2.0 yd3 1.6 yd3 1.7 yd3 1.8 yd3 2.0 yd3 1.6 yd3 1.8 yd3
Carriage Fork Widths
Steering System Articulation Angle (each direction) Steering Cylinder, Double-Acting: Bore Diameter Rod Diameter Stroke Steering Pump: Maximum Flow Maximum Working Pressure Maximum Steering Torque: At 0° (straight) At 40° (full turn) Steering Cycle Times (stop to stop) At 2,400 RPM Engine Speed, 90 RPM Steering Wheel Speed Number of Steering Wheel Turns – stop to stop, turning wheel at >67 RPM – stop to stop, turning wheel at <27 RPM
1.3 m3 1.5 m3 1.2 m3 1.3 m3 1.4 m3 1.5 m3 1.2 m3 1.4 m3
16.5 L 150 L 85 L 60 L
4.4 gal 39.6 gal 22.5 gal 15.9 gal
2
914K Compact Wheel Loader
Dimensions (All dimensions are approximate. Dimensions vary with bucket, couplers, and tire choice.) 23
17
19
24
13
14 21
12
11
1
10
2
22
9 27
25
16
26
4
15
3
6
7 8
18 20
5
** ** ** ** *
1 2 3 4 5 6 7 8 * 9 ** 10 ** 11 ** 12 ** 13 * 14 15 ** 16 17 18 19 20 21 22 23 24 25 26 27
Height: Ground to Cab Height: Ground to Beacon Height: Ground Axle Center Height: Ground Clearance Length: Overall Length: Rear Axle to Bumper Length: Hitch to Front Axle Length: Wheel Base Clearance: Bucket at 45° Clearance: Load Over Height Clearance: Level Bucket Height: Bucket Pin Height: Overall Reach: Bucket at 45° Carry Height: Bucket Pin Dig Depth Width: Bucket Width: Tread Center Turning Radius: Over Bucket Width: Over Tires Turning Radius: Outside of Tires Turning Radius: Inside of Tires Rack Angle at Full Lift Dump Angle at Full Lift Rack Angle at Carry Departure Angle Articulation Angle Operating Weight
Standard Lift – Pin On 3093 mm 10'1" 3283 mm 10'9" 640 mm 2'1" 405 mm 1'3" 6291 mm 20'7" 1600 mm 5'2" 1300 mm 4'3" 2600 mm 8'6" 2820 mm 9'3" 3315 mm 10'10" 3447 mm 11'3" 3701 mm 12'1" 4621 mm 15'1" 790 mm 2'7" 317 mm 1'0" 89 mm 3.4" 2401 mm 7'10" 1800 mm 5'10" 5200 mm 17'0" 2259 mm 7'4" 4783 mm 15'8" 2442 mm 8'0" 57° 48° 41° 33° 40° 8126 kg 17,915 lb
High Lift – Pin On 3093 mm 10'1" 3283 mm 10'9" 640 mm 2'1" 405 mm 1'3" 6834 mm 22'5" 1600 mm 5'2" 1300 mm 4'3" 2600 mm 8'6" 3174 mm 10'4" 3429 mm 11'2" 3800 mm 12'5" 4055 mm 13'3" 4974 mm 16'3" 1009 mm 3'3" 483 mm 1'6" 272 mm 10.7" 2401 mm 7'10" 1800 mm 5'10" 5448 mm 17'10" 2259 mm 7'4" 4783 mm 15'8" 2442 mm 8'0" 59° 44° 49° 33° 40° 8181 kg 18,030 lb
*Vary with bucket. **Vary with tire. Dimensions listed are for a machine configured with general purpose Pin On buckets, bolt-on cutting edges, full fuel tank, 80 kg (176 lb) operator, and 17.5-R25 tires.
3
914K Compact Wheel Loader Dimensions (All dimensions are approximate. Dimensions vary with bucket, couplers, and tire choice.) 23
17
19
24
13 12
14
21
11 10
1
2
22
9 27
25
16
26
4
15
3
6
7 8
18 20
5
** ** ** ** *
1 2 3 4 5 6 7 8 * 9 ** 10 ** 11 ** 12 ** 13 * 14 15 ** 16 17 18 19 20 21 22 23 24 25 26 27
Height: Ground to Cab Height: Ground to Beacon Height: Ground Axle Center Height: Ground Clearance Length: Overall Length: Rear Axle to Bumper Length: Hitch to Front Axle Length: Wheel Base Clearance: Bucket at 45° Clearance: Load Over Height Clearance: Level Bucket Height: Bucket Pin Height: Overall Reach: Bucket at 45° Carry Height: Bucket Pin Dig Depth Width: Bucket Width: Tread Center Turning Radius: Over Bucket Width: Over Tires Turning Radius: Outside of Tires Turning Radius: Inside of Tires Rack Angle at Full Lift Dump Angle at Full Lift Rack Angle at Carry Departure Angle Articulation Angle Operating Weight
Standard Lift – IT 3093 mm 10'1" 3283 mm 10'9" 640 mm 2'1" 405 mm 1'3" 6362 mm 20'10" 1600 mm 5'2" 1300 mm 4'3" 2600 mm 8'6" 2775 mm 9'1" 3315 mm 10'10" 3446 mm 11'3" 3701 mm 12'1" 4674 mm 15'4" 847 mm 2'9" 317 mm 1'0" 89 mm 3.5" 2401 mm 7'10" 1800 mm 5'10" 5222 mm 17'1" 2259 mm 7'4" 4783 mm 15'8" 2442 mm 8'0" 57° 48° 41° 33° 40° 8467 kg 18,666 lb
High Lift – IT 3093 mm 10'1" 3283 mm 10'9" 640 mm 2'1" 405 mm 1'3" 6905 mm 22'7" 1600 mm 5'2" 1300 mm 4'3" 2600 mm 8'6" 3129 mm 10'3" 3429 mm 11'2" 3800 mm 12'5" 4055 mm 13'3" 5027 mm 16'5" 1066 mm 3'5" 483 mm 1'6" 273 mm 10.7" 2401 mm 7'10" 1800 mm 5'10" 5471 mm 17'11" 2259 mm 7'4" 4783 mm 15'8" 2442 mm 8'0" 59° 44° 49° 33° 40° 8521 kg 18,785 lb
*Vary with bucket. **Vary with tire. Dimensions listed are for a machine configured with general purpose bucket, IT quick coupler, bolt-on cutting edges, full fuel tank, 80 kg (176 lb) operator, and 17.5-R25 tires.
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
AEHQ7179 (01-14)
© 2014 Caterpillar All Rights Reserved Printed in U.S.A. Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
AEHQ7179.indd 4
1/22/14 11:17 AM
