Transcript
SMART CYCLING HELMET
MENU
CLICK ANY SECTION TO BEGIN
ABOUT THE HELMET
BLUETOOTH MODULE
PAIRING WITH DEVICES
MOBILE PHONE USAGE
STEREO MUSIC
INTERCOM SETUP
USING THE FM RADIO
GENERAL SETTINGS
REMOTE CONTROL
TROUBLESHOOTING
MAINTENANCE AND CARE
LEGEND: HOLD
= Function TAP
1x
=
1s
Highlighted Button(s) to Tap or Hold
Tap button the specified number of times
“Hello”
HOLD
10s
Press and Hold button for the specified amount of time
Audible prompt from the Bluetooth Module
TABLE OF CONTENTS 1. ABOUT THE X1 SMART CYCLING HELMET 1.1 General Information 1.2 Product Details 1.3 Wearing the Helmet 1.3.1 How to Wear The Helmet 1.3.2 Helmet Fitment Check
2. GETTING STARTED: BUILT-IN BLUETOOTH SYSTEM 2.1 Button Functions 2.2 Powering On and Off 2.3 Charging 2.4 Checking the Bluetooth Module’s Battery Level 2.5 Volume Adjustment 2.6 Downloadable Sena Software 2.6.1 Sena Device Manager 2.6.2 Sena Smartphone App
6 6 9 10 10 14
16 16 17 17 19 20 21 21 21
2.7 Configuration Menu
22
3. PAIRING THE HELMET WITH OTHER BLUETOOTH DEVICES
25
3.1 Mobile Phone 3.2 Additional Mobile Phones or MP3 Player 3.3 Advanced Selective Pairing: Hands-Free or A2DP Stereo 3.3.1 Phone Selective Pairing — Hands-Free Profile 3.3.2 Media Selective Pairing — A2DP Profile
26 27 29 29 30
TABLE OF CONTENTS CONTINUED
4. MOBILE PHONE USAGE
32
4.1 Making and Answering Calls 4.2 Speed Dialing
32 33
4.2.1 Assigning Speed Dial Presets 4.2.2 Using Speed Dial Presets
5. STEREO MUSIC
33 36
38
5.1 Playing Music with Bluetooth Devices 38 5.2 Music Sharing 39 6. INTERCOM SETUP
40
6.1 Intercom Pairing 6.2 Two-Way Intercom 6.3 Multi-Way Intercom
40 43 44
6.3.1 Starting a Three-Way Intercom Conference 44 6.3.2 Starting a Four-Way Intercom Conference 46 6.3.3 Ending Multi-Way Intercom 46
6.4 Three-Way Conference Phone Call with Intercom Users 6.5 Group Intercom 6.6 Universal Intercom 6.7 Advanced Noise Control™ (Default: Enable)
46 48 49 51
7. USING THE FM RADIO
53
7.1 7.2 7.3 7.4
53 54 56 57
FM Radio On/Off Seek and Save Radio Stations Scan and Save Radio Stations Temporary Station Preset
TABLE OF CONTENTS CONTINUED
7.5 Navigating Preset Stations 7.6 Region Selection (Default: Worldwide) 7.7 Radio Data System(RDS) Alternative(AF) Setting (Default: Enable) 7.8 FM Station Guide (Default: Enable)
58
8. GENERAL SETTINGS
62
8.1 8.2 8.3 8.4
59 59 61
Function Priority 62 Firmware Updates 62 Voice Prompts 62 Deleting All Bluetooth Pairing Information 64
9. REMOTE CONTROL
65
9.1 Pairing with the Remote Control
65
10. TROUBLESHOOTING
67
10.1 Fault Reset 10.2 Factory Reset
67 68
11. MAINTENANCE AND CARE
69
MENU
1. ABOUT THE X1 SMART CYCLING HELMET 1.1 General Information General Information Product Details Wearing the Helmet
This product is a bicycle helmet. Do not use it for any other purpose than riding a bicycle. If you use the helmet for anything else, it may not provide sufficient protection in an accident. Sena recommends that you choose a helmet which provides the most coverage, as a helmet that covers more of your head may provide additional protection. Always wear your bicycle helmet low in the front to protect the forehead, as this area is most likely to be impacted in a bicycle crash. Make sure the helmet fits comfortably and is tightly fastened at all times. WARNING: •Y our helmet will not protect against injury in all types of accidents. Even while wearing a helmet, low speed accidents may result in serious head injury or death. A bicycle helmet will not protect against injuries to the spine, neck or face. In the event of any impact, do not use this helmet. There may be damage invisible to you, which may reduce the ability of the helmet to reduce the harmful effects of a blow to the head. Such helmet should be returned to Sena for inspection, or destroyed and replaced. •D o not modify or remove any original part of the helmet. Do not use heat damaged helmets. Heat damaged helmets will appear to have uneven or have bubbly surfaces.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 6
MENU
1. ABOUT THE X1 SMART CYCLING HELMET General Information Product Details Wearing the Helmet
WARNING: •T his User’s Guide and the stickers inside your helmet contain many instructions and warnings about your helmet. It is important for you to understand everything communicated in them before your first ride. If you do not, please contact your authorized Sena Retailer with any questions you may have. Failure to follow any of the provided instructions or warnings could void your warranty, and most importantly, could result in severe personal injury or death. If you are a parent or guardian and this helmet is for your child, please take the time to read this manual as you should make sure your child understands everything in this User’s Guide. •F or maximum protection, the Sena X1 Smart Cycling Helmet must fit properly on the head and its chinstrap securely fastened under the chin. With the retention system comfortably but firmly adjusted, the helmet should allow sufficient peripheral vision when secured. If the helmet is too large, it may move on your head while riding. If the helmet can be moved when pulled from the back in an upward and forward direction, then the helmet is not fitted properly. This could cause the helmet to obstruct your vision while riding or come off in an accident, resulting in personal injury or death. Please refer to Section 1.3: “Wearing the Helmet” for more details about properly securing and wearing your helmet.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 7
MENU
1. ABOUT THE X1 SMART CYCLING HELMET General Information Product Details Wearing the Helmet
WARNING: •T he contents of this Sena X1 Smart Cycling Helmet User’s Guide are subject to change without notice. Its illustrations may differ from the actual product. The copyrights for the User’s Guide belong to Sena Technologies, Inc. Reproduction or copying of the User’s Guide without permission is strictly prohibited. For United States Consumers, this helmet has been tested and certified to meet and exceed the Bicycle Safety Standard for Bicycle Helmets, 16 CFR Part 1203. A copy of this regulation can be obtained by visiting CPSC.gov. For European Consumers, this helmet has been tested and certified to meet and exceed European Committee for Standardization, CE EN1078. A copy of this regulation can be obtained by visiting CEN.eu. For Australian and New Zealand Consumers, this helmet has been tested and certified to meet and exceed the Standards Australia, AS/NZS 2063:2008. A copy of this regulation can be obtained by visiting Standards.org.au for Australia and standards.govt. nz for New Zealand.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 8
MENU
1. ABOUT THE X1 SMART CYCLING HELMET 1.2 Product Details General Information Product Details
Bluetooth Communication Module
DC Power Charging & Firmware Upgrade Port
Wearing the Helmet
Retention System
Buckle
Strap Adjuster
Microphone
Speakers
Sena X1 Smart Cycling Helmet Firmware v1.0 | 9
MENU
1. ABOUT THE X1 SMART CYCLING HELMET 1.3 Wearing the Helmet General Information Product Details Wearing the Helmet
1.3.1 How to Wear The Helmet For proper use, the helmet must sit level on the head and low on the forehead. The Sena helmet uses a simple, quick-release buckle system that, once adjusted, can be buckled and unbuckled without changing the adjustment. For proper use, the straps must be tight and evenly tensioned. To properly wear your helmet: 1. Position the helmet on your head with the front covering your forehead. If the helmet is tipped back and is not covering your forehead then the helmet is not in the proper position.
WARNING: Always wear the helmet in the proper position on your head with the front of the helmet covering your forehead for maximum protection. Never wear the helmet tipped back as the helmet will be in the improper position causing your forehead to be exposed. All fitment adjustments need to be made with the helmet in the proper position.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 10
MENU
1. ABOUT THE X1 SMART CYCLING HELMET General Information Product Details
2. Position the strap adjuster centered, just below your ears. 3. Position the helmet low on your forehead with the buckle under the chin and back against the throat. The straps should fit comfortably around both ears.
Wearing the Helmet
Strap Adjuster Buckle
Sena X1 Smart Cycling Helmet Firmware v1.0 | 11
MENU
1. ABOUT THE X1 SMART CYCLING HELMET General Information Product Details Wearing the Helmet
4. With the strap adjuster in the proper position, adjust the chinstrap tension at the buckle. Adjust the tension so the chinstrap is tight and comfortable by pulling the chinstrap end through the buckle to either tighten or loosen as needed. Use the “O-Ring” to secure the excess strap. Always wear the helmet with the chinstrap buckle fastened and the chinstrap pulled tight and positioned back against the throat. With the strap buckled and the helmet positioned, you should feel the chinstrap pull firmly against your chin as you open your mouth. When properly adjusted the helmet will wrap around your head and cradle it with firm, but comfortable pressure. Chinstrap
O-Ring
Sena X1 Smart Cycling Helmet Firmware v1.0 | 12
MENU
1. ABOUT THE X1 SMART CYCLING HELMET General Information Product Details Wearing the Helmet
5. Your Sena X1 Smart Cycling Helmet is equipped with an adjustable retention system which helps stabilize the helmet in the correct position when you ride. When wearing the helmet, turn the retention system knob clockwise to tighten the helmet or counterclockwise to loosen the helmet.
Retention System Knob
6. To change the height of the retention Retention system, firmly pull or push the retention System Knob system upward or downward to a different position.
Retention System
Retention System
Sena X1 Smart Cycling Helmet Firmware v1.0 | 13
MENU
1. ABOUT THE X1 SMART CYCLING HELMET General Information Product Details Wearing the Helmet
WARNING: For maximum protection, this helmet must be fitted and attached properly to the wearer’s head in accordance with the following instructions. If after adjustment the helmet does not fit properly, do not use the helmet. Return it to the retailer or Sena. 1.3.2 Helmet Fitment Check With the retention system knob turned clockwise until comfortably tight and the chinstrap buckled under the chin and back against the throat, grab the helmet with both hands and try to remove it by rolling the helmet forward and backward as far as you can. This is an important test to ensure that the helmet fits correctly. When you do this, you should feel the chinstrap pull against the underside of your chin and the helmet will resist any movement. If this isn’t the case, tighten the chinstrap and try it again until this happens. If you cannot achieve the proper fit, DO NOT USE THIS HELMET. Replace it with a different size until the correct fit is achieved. Also, for a proper Helmet Fitment Check if you can roll the helmet forward such that it blocks your vision or if you can roll the helmet backwards such that your forehead is not covered, tighten the chinstrap and the retention system and try again until you cannot roll the helmet forward or backwards.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 14
MENU
1. ABOUT THE X1 SMART CYCLING HELMET General Information Product Details Wearing the Helmet
WARNING: • Do not wear anything underneath your helmet, such as a cap, hood, bundled hair, headphones, or barrettes, as the helmet may loosen or come off. Do not wear anyone else’s helmet and don’t loan your helmet to anyone else. • Always make sure the buckle is properly fastened before you ride. Failure to follow this instruction could result in serious personal injury, as the helmet may not stay in position while riding or during a fall. For proper use, make sure the loose end of the chinstrap is tucked through the rubber “O” ring. • Check for proper fit and adjustment often, including each time you wear it, and periodically during use. • This helmet has been designed for recreational bicycling. This helmet has not been approved and is not intended for extreme uses such as downhill racing at high speeds, jumping or leaping with a fully suspended bicycle, snow sports, water sports, motor sports, street hockey, playground activities, or other activities where face, ear, or greater protection or coverage is desired. • Always wear a helmet when bicycling. When you get off your bicycle, remove your helmet. Do not wear a helmet while climbing trees, in play areas, on playground equipment, or, at any time while not riding a bicycle. Parents: Instruct children to follow this warning. Failure to follow this warning could result in serious personal injury, death or death by strangulation.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 15
MENU
2. G ETTING STARTED: BUILT-IN BLUETOOTH SYSTEM 2.1 Button Functions Button Functions Powering On and Off
(-) Button
(+) Button
Decrease Volume Track Back FM Tuner On/Off
Increase Volume Track Forward Scan Radio Stations Speed Dial
Charging Checking the Bluetooth Module’s Battery Level Volume Adjustment Downloadable Sena Software Configuration Menu
Blue, Red and Green LED Lights
Fault Reset Button
Center Button Answer/End Phone Call Reject an Incoming Phone Call Start/End Intercom Conversation Play/Pause Music Enter Intercom Pairing Mode Enter Voice Configuration Settings
Sena X1 Smart Cycling Helmet Firmware v1.0 | 16
MENU
2. G ETTING STARTED: BUILT-IN BLUETOOTH SYSTEM 2.2 Powering On and Off Button Functions Powering On and Off
Press and hold the Center Button and the (+) Button at the same time for 1 second to turn the headset on or off. Powering On
Charging Checking the Bluetooth Module’s Battery Level
=
Configuration Menu
1s
POWER ON DEVICE
Powering Off
Volume Adjustment Downloadable Sena Software
HOLD
TAP
=
1x
POWER OFF DEVICE
2.3 Charging The Bluetooth Communication Module can be charged using many common methods via the supplied USB power & data cable: 1. Plugged into a computer’s USB port. 2. With a USB-equipped AC adapter via a walloutlet charger. Note: Please make sure to take off your helmet while charging. The headset automatically turns off during charging.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 17
MENU
2. G ETTING STARTED: BUILT-IN BLUETOOTH SYSTEM Button Functions
Charging the Bluetooth Communication Module
Powering On and Off Charging Checking the Bluetooth Module’s Battery Level
DC Power Charging & Firmware Upgrade Port
Volume Adjustment Downloadable Sena Software Configuration Menu
Depending upon the charging method, the Bluetooth Module will be fully charged in about 2.5 hours.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 18
MENU
2. G ETTING STARTED: BUILT-IN BLUETOOTH SYSTEM Button Functions Powering On and Off
2.4 Checking the Bluetooth Module’s Battery Level There are two ways to check battery level: 1. Visually, with LEDs when powering on. Battery Level — Visual Method
Charging Checking the Bluetooth Module’s Battery Level Volume Adjustment
=
1s
VISUAL METHOD
= HIGH
Downloadable Sena Software Configuration Menu
HOLD
= MEDIUM
= LOW
Battery Level — Audible Method
Note: Blinking LEDs alternate from blue to red when battery power is low.
HOLD
=
3s
AUDIBLE METHOD
“Battery level high/medium/low”
Sena X1 Smart Cycling Helmet Firmware v1.0 | 19
= HIGH
MENU
2. G ETTING STARTED: = BUILT-IN BLUETOOTH SYSTEM MEDIUM
Button Functions Powering On and Off
2. Audible method: Press and hold the Center = Button and the (+) Button for 3 more seconds as the headset powers on. A prompt will LOW announce the remaining battery level. Battery Level — Audible Method
Charging Checking the Bluetooth Module’s Battery Level Volume Adjustment Downloadable Sena Software Configuration Menu
HOLD
=
3s
AUDIBLE METHOD
“Battery level high/medium/low”
2.5 Volume Adjustment You can raise or lower the volume by tapping the (+) Button or the (-) Button. Volume is set and maintained independently at different levels for each audio source (i.e., phone, intercom), even when the headset is rebooted. Volume Up
=
TAP
1x
VOLUME UP
Volume Down
=
TAP
1x
VOLUME DOWN
Sena X1 Smart Cycling Helmet Firmware v1.0 | 20
MENU
2. G ETTING STARTED: BUILT-IN BLUETOOTH SYSTEM 2.6 Downloadable Sena Software Button Functions Powering On and Off Charging Checking the Bluetooth Module’s Battery Level Volume Adjustment Downloadable Sena Software Configuration Menu
2.6.1 Sena Device Manager The Sena Device Manager allows you to upgrade the Bluetooth Communication Module’s firmware and configure its settings directly from your PC or Apple computer. Using this software, you can assign speed dial presets, FM radio station presets and more. For more information on downloading the Sena Device Manager, please visit sena.com.
Click Here to Visit Sena.com 2.6.2 Sena Smartphone App The Sena Smartphone App allows you to configure the Bluetooth Communication Module’s settings, as well as access the User’s and Quick Start Guides. To do so, pair your mobile phone with your X1 Smart Cycling Helmet (please refer to Section 3: “Pairing the Helmet with other Bluetooth Devices” for more details). Run the Sena Smartphone App and configure the settings directly from your smartphone. You can download the Sena Smartphone App for Android and Apple operating systems.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 21
MENU
2. G ETTING STARTED: BUILT-IN BLUETOOTH SYSTEM 2.7 Configuration Menu Button Functions Powering On and Off Charging Checking the Bluetooth Module’s Battery Level Volume Adjustment Downloadable Sena Software Configuration Menu
The Bluetooth Communication Module can be configured by following a series of voice prompts. Further details about each of these settings will be explained on the following pages. 1. To access the Configuration Menu, press and hold the Center Button for 10 seconds until you hear the voice prompt, “Configuration menu.” Accessing the Configuration Menu
HOLD
= ACCESS CONFIG. Accessing MENU
10s
the Configuration Menu
Navigating Forward through the Menu
HOLD
2. Tap the (+) = Button or the (-) Button to navigate 10s between the menus. You will hear voice prompts TAP for each menu item. The list of functions is shown ACCESS = CONFIG. 1x in the Configuration Menu Chart on page page MENU 24. NAVIGATE
FORWARD Navigating Forward through the Menu
“[Menu prompt]”
=
TAP
1x
NAVIGATE Navigating Backward through the Menu FORWARD
=“[Menu prompt]”
TAP
1x
NAVIGATE
BACKWARD Backward through the Menu Navigating
“[Menu prompt]”
=
TAP
1x
NAVIGATE Enable/Disable or Execute a Feature BACKWARD
Sena X1 Smart Cycling Helmet Firmware v1.0 | 22
Navigating Forward through the Menu =
TAP
1x
MENU
= 2. G ETTING STARTED: 1x BUILT-IN BLUETOOTH “[Menu prompt]” SYSTEM NAVIGATE FORWARD
TAP
NAVIGATE FORWARD
Button Functions Powering On and Off
“[Menu through prompt]” Navigating Backward the Menu
Navigating Backward through the Menu = NAVIGATE BACKWARD
Charging Checking the Bluetooth Module’s Battery Level Volume Adjustment Downloadable Sena Software Configuration Menu
NAVIGATE BACKWARD
TAP
1x TAP
=
1x
“[Menu prompt]”
“[Menu prompt]” Enable/Disable or Execute a Feature 3. You can enable/disable the feature or execute the command by tapping the Center Button. Enable/Disable or Execute a Feature ENABLE OR DISABLE
ENABLE OR DISABLE
TAP
=
1x
=
TAP
1x
EXECUTE
EXECUTE
Sena X1 Smart Cycling Helmet Firmware v1.0 | 23
MENU
2. G ETTING STARTED: BUILT-IN BLUETOOTH SYSTEM Configuration Menu Chart
Button Functions Powering On and Off
Tap the (+) Button or (-) Button the specified number of times TAP
1x
TAP
Charging
2x
TAP
Checking the Bluetooth Module’s Battery Level
3x
Volume Adjustment
5x
TAP
4x
TAP
TAP
6x
Downloadable Sena Software Configuration Menu
TAP
7x
TAP
8x
TAP
6x
TAP
5x
TAP
4x
TAP
3x
TAP
2x
TAP
1x
Tap the Center Button
Phone Pairing
Execute
Second Mobile Phone Pairing
Execute
Phone Selective Pairing
Execute
Media Selective Pairing
Execute
Speed Dial
Execute
Voice Prompt
Enable/Disable
RDS AF Setting
Enable/Disable
FM Station Guide
Enable/Disable
Advanced Noise Control
Enable/Disable
Delete All Pairings
Execute
Remote Control Pairing
Execute
Universal Intercom Pairing
Execute
Factory Reset
Execute
Exit Configuration
Execute
Sena X1 Smart Cycling Helmet Firmware v1.0 | 24
3. P AIRING THE HELMET WITH OTHER BLUETOOTH DEVICES Mobile Phone Additional Mobile Phones or MP3 Player Advanced Selective Pairing: Hands-Free or A2DP Stereo
MENU
Before using X1’s Bluetooth system with other Bluetooth devices for the first time, they’ll need to be “paired.” This enables them to recognize and communicate with one another whenever they’re within range. The helmet’s Bluetooth Module can pair with multiple Bluetooth devices such as a mobile phone, GPS, MP3 player or Sena SR10 Two-Way Radio Adapter via Mobile Phone Pairing and Second Mobile Phone Pairing. The Bluetooth Helmet module can also be paired with up to three other Sena headsets. Bluetooth Communication Module
Pairs with up to three Sena Headsets
Also pairs with:
Mobile Phone
MP3 Player
GPS Devices
Sena X1 Smart Cycling Helmet Firmware v1.0 | 25
3. P AIRING THE HELMET WITH OTHER BLUETOOTH DEVICES
MENU
3.1 Mobile Phone Mobile Phone Additional Mobile Phones or MP3 Player Advanced Selective Pairing: Hands-Free or A2DP Stereo
1. Execute Phone Pairing in the Configuration Menu. Access Phone Pairing in the Configuration Menu
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
TAP
=
1x
NAVIGATE FORWARD 1X
“Phone pairing”
Alternating blue and red = flashing lights indicate device is now discoverable. LED STATUS
2. With your mobile phone in Bluetooth-pairing = mode, select Sena X1 in the list of devices detected. PIN NUMBER
Sena X1 Smart Cycling Helmet Firmware v1.0 | 26
FORWARD 1X
3. P AIRING“Phone THE pairing” HELMET WITH OTHERAlternating BLUETOOTH blue and red = flashing lights indicate DEVICES
MENU
device is now discoverable.
3. If your mobile phone asks for a PIN, enter 0000. LED STATUS
Mobile Phone Additional Mobile Phones or MP3 Player Advanced Selective Pairing: Hands-Free or A2DP Stereo
= PIN NUMBER
3.2 Additional Mobile Phones or MP3 Player Before using X1’s Bluetooth system with other Bluetooth devices for the first time, they’ll need to be “paired.” This enables them to recognize and communicate with one another whenever they’re within range. The helmet’s Bluetooth Module can pair with multiple Bluetooth devices such as a mobile phone, for hearing navigational directions from a GPS app or health and training information from apps such as Strava and Cyclometer, or an MP3 player via Mobile Phone Pairing and Second Mobile Phone Pairing. The Bluetooth Helmet module can also be paired with up to three other Sena headsets. 1. Execute Second Mobile Phone Pairing in the Configuration Menu. Access Second Mobile Phone Pairing in the Configuration Menu
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
= NAVIGATE
TAP
2x Sena X1 Smart Cycling Helmet Firmware v1.0 | 27
HOLD
=
3. P AIRING THE Access Phone Pairing in the Configuration Menu HELMET WITH OTHER BLUETOOTH DEVICES = “Configuration menu”
10s
MENU
ACCESS CONFIG. MENU
Mobile Phone Additional Mobile Phones or MP3 Player Advanced Selective Pairing: Hands-Free or A2DP Stereo
ACCESS CONFIG. MENU
HOLD
10s TAP
=
2x “Configuration menu”
NAVIGATE FORWARD 2X
NAVIGATE FORWARD 1X
TAP
=
“Second mobile phone pairing”1x
=
Blue flashing lights indicates device is now discoverable. “Phone pairing”
LED STATUS
2. With your mobile phone inblue Bluetooth-pairing and red = Alternating mode, select Sena X1 in the list of devices = flashing lights indicate detected.
device is now discoverable.
PIN NUMBER
3. If your mobile phone asks for a PIN, enter 0000. LED STATUS
= PIN NUMBER
Sena X1 Smart Cycling Helmet Firmware v1.0 | 28
3. P AIRING THE HELMET WITH OTHER BLUETOOTH DEVICES Mobile Phone Additional Mobile Phones or MP3 Player Advanced Selective Pairing: Hands-Free or A2DP Stereo
MENU
3.3 Advanced Selective Pairing: Hands-Free or A2DP Stereo Phone Pairing allows the Bluetooth Module to establish two Bluetooth profiles: Hands-Free or A2DP Stereo. Advanced Selective Pairing allows the module to separate the profiles to enable connection with two devices. 3.3.1 Phone Selective Pairing — Hands-Free Profile 1. Execute Phone Selective Pairing in the Configuration Menu. Access Phone Selective Pairing in the Configuration Menu
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
TAP
=
3x
NAVIGATE FORWARD 3X
“Phone selective pairing”
=
Blue flashing lights indicates device is now discoverable.
LED STATUS
= PIN NUMBER
Sena X1 Smart Cycling Helmet Firmware v1.0 | 29
TAP
=
3. P AIRING THE HELMET WITH OTHER BLUETOOTH DEVICES“Phone selective pairing” NAVIGATE FORWARD 3X
Mobile Phone Additional Mobile Phones or MP3 Player
3x MENU
2. With your hands-free device in BluetoothBlue flashing lights pairing mode, select Sena X1 in theindicates list of = devices detected. device is now discoverable. 3. If it asks for a PIN, enter 0000. LED STATUS
= PIN NUMBER
Advanced Selective Pairing: Hands-Free or A2DP Stereo
3.3.2 Media Selective Pairing — A2DP Profile 1. Execute Media Selective Pairing in the Configuration Menu. Access Media Selective Pairing in the Configuration Menu
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
TAP
=
4x
NAVIGATE FORWARD 4X
“Media selective pairing”
=
Red flashing light indicates device is now discoverable.
LED STATUS
= PIN NUMBER
Sena X1 Smart Cycling Helmet Firmware v1.0 | 30
=
3. P AIRING THE HELMET WITH OTHER BLUETOOTH DEVICES“Media selective pairing”
TAP
4x MENU
NAVIGATE FORWARD 4X
Mobile Phone Additional Mobile Phones or MP3 Player Advanced Selective Pairing: Hands-Free or A2DP Stereo
2. With your A2DP device in Bluetooth-pairing mode, selectRed SenaflX1 in thelight list ofindicates devices ashing detected.= device is now discoverable. 3. If it asks for a PIN, enter 0000. LED STATUS
= PIN NUMBER
Sena X1 Smart Cycling Helmet Firmware v1.0 | 31
MENU
4. MOBILE PHONE USAGE 4.1 Making and Answering Calls Making and Answering Calls Speed Dialing
Answer a Call
TAP
=
1x
ANSWER
End/Reject a Call
HOLD
=
2s
END/REJECT
Make a Call with Voice Dialer
=
HOLD
3s
VOICE DIAL
Note: If you have a GPS device connected, you will not hear its voice navigations during a phone call.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 32
MENU
4. MOBILE PHONE USAGE 4.2 Speed Dialing Making and Answering Calls Speed Dialing
4.2.1 Assigning Speed Dial Presets 1. Execute Speed Dial in the Configuration Menu by holding down the Center Button for 10 seconds, then using the (+) and (-) Buttons to scroll through the menu. Please refer to Section 2.7: “Configuration Menu” for more details. Assigning Speed Dial Presets
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
TAP
=
5x
NAVIGATE FORWARD 5X
“Speed dial”
TAP
=
1x
EXECUTE
Navigate Forward through Preset Numbers
=
TAP
1x
NAVIGATE FORWARD 1X
Sena X1 Smart “Speed dialCycling (#)” Helmet Firmware v1.0 | 33
TAP
=
5x MENU
NAVIGATE FORWARD 5X
“Speed dial”
4. MOBILE PHONE USAGE Making and Answering Calls
2. Tap the (+) Button or the (-) Button to TAP set = available Speed Dial Presets. 1x up the three You will hear the voice prompt, “Speed EXECUTE dial” followed by the preset number. Navigate Forward through Preset Numbers
Speed Dialing
TAP
=
1x
NAVIGATE FORWARD 1X
“Speed dial (#)”
Navigate Backward through Preset Numbers
TAP
=
1x
NAVIGATE BACKWARD 1X
“Speed dial (#)”
On Your Mobile Phone, Dial Number
3. On your mobile phone, call the number to which you want to assign a Speed Dial the phone number Dial Preset. call will be terminated = onThe your mobile phone immediately. Then, you will hear the voice MOBILE prompt, “Save speed dial (#).” This PHONE confirms that the number was saved. “Save speed dial (#)”
Exit Menu
TAP
=
1x
EXIT MENU
Sena X1 Smart Cycling Helmet Firmware v1.0 | 34
“Cancel”
NAVIGATE FORWARD 1X
TAP
=
1x
“Speed dial (#)”
NAVIGATE BACKWARD 1X
MENU
Navigate Backward through Preset Numbers
dial (#)” 4. MOBILE “Speed PHONE USAGE TAP
=
On Your Mobile Phone, Dial Number
Making and Answering Calls Speed Dialing
NAVIGATE BACKWARD 1X
1x
Dial the phone number
= on your mobile phone
MOBILE PHONE
“Speed dial (#)”
dial (#)” On Your Mobile “Save Phone,speed Dial Number
Dial the phone number = on your mobile phone 4. Use this procedure to save other Speed Dial Presets. MOBILE Exit Menu
TAP
= menu, tap the (+) Button or1x 5. To exit the the PHONE
(-) Button until you hear the voice prompt, EXIT “Save speed dial (#)” “Cancel,” then tap the Center Button to MENU confirm. “Cancel”
Exit Menu
EXIT MENU
TAP
= =
1x TAP 1x
CONFIRM CANCEL
“Cancel”
=
TAP
1x
CONFIRM CANCEL
Sena X1 Smart Cycling Helmet Firmware v1.0 | 35
MENU
4. MOBILE PHONE USAGE 4.2.2 Using Speed Dial Presets
Making and Answering Calls Speed Dialing
1. Press and hold the (+) Button for 3 seconds to enter into the Speed Dial menu. You will hear the voice prompt, “Speed dial.” Enter Speed Dial Mode
Enter Speed= Dial Mode
HOLD
3s
SPEED DIAL HOLD
= “Speed dial”
3s
SPEED DIAL
Navigate Forward through Speed Dial Preset Numbers
2. Tap the (+)“Speed Buttondial” or the (-) Button to navigate between the Speed Dial Presets. TAP
= through Speed Dial Preset Numbers 1x Navigate Forward NAVIGATE FORWARD
TAP
=
1x
Navigate Backward through Speed Dial Preset Numbers NAVIGATE FORWARD TAP
= 1x Navigate Backward through Speed Dial Preset Numbers NAVIGATE BACKWARD
TAP
=
Call a Speed Dial Preset Number
1x
NAVIGATE BACKWARD
“Speed dial (#)”
Call a Speed Dial Preset Number
=
“Speed dial (#)”
TAP
1x
SPEED DIAL TAP
=
Redial Last Number
1x
SPEED DIAL
“Last number redial”
Redial Last Number
Sena X1 Smart Cycling Helmet Firmware v1.0 | 36
NAVIGATE BACKWARD
Call a Speed Dial Preset Number
MENU
Enter Speed Dial Mode
“Speed dial (#)” HOLD
=
3s 4. MOBILE PHONE USAGE TAP
SPEED DIAL
3. To redial=the last number called, tap the 1x
Making and Answering Calls
Center Button when you hear the prompt, “Speed dial” “Last number redial.”
SPEED DIAL
Redial Last Number Navigate Forward through Speed Dial Preset Numbers
Speed Dialing
= NAVIGATE FORWARD
“Last number redial”
TAP
1x TAP
=
1x
Navigate Backward through Speed Dial Preset Numbers REDIAL TAP
=
1x
4. To call one of your Speed Dial Presets, tap the Center Button when you hear the NAVIGATE BACKWARD prompt, “Speed dial (#).” Call a Speed Dial Preset Number
“Speed dial (#)”
TAP
=
1x
SPEED DIAL
Redial Last Number
“Last number redial”
=
TAP
1x
REDIAL
Sena X1 Smart Cycling Helmet Firmware v1.0 | 37
MENU
5. STEREO MUSIC 5.1 Playing Music with Bluetooth Devices Playing Music with Bluetooth Devices
1. To play or pause music, press and hold the Center Button for 1 second until you hear a double beep. Play/Pause Music
Music Sharing
HOLD
=
1s
PLAY/PAUSE
“[Beep, Beep]”
Next adjust Track the volume, tap the (+) Button or the 2. To (-) Button. Volume Up
SKIP TRACK FORWARD
=
HOLD
=
TAP
1s
1x
Previous VOLUME UPTrack Volume Down
SKIP TRACK BACKWARD
=
HOLD
=
TAP
1s
1x
VOLUME DOWN
3. To track forward or back, press and hold the (+) Button or the (-) Button for 1 second.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 38
HOLD
=
1s
MENU
PLAY/PAUSE
“[Beep, Beep]”
5. STEREO MUSIC Playing Music with Bluetooth Devices Music Sharing
Next Track
HOLD
=
1s
SKIP TRACK FORWARD
Previous Track
HOLD
=
1s
SKIP TRACK BACKWARD
5.2 Music Sharing You can share the music you’re listening to with an Intercom Friend during an intercom conversation. To start or terminate sharing music, press the Center Button for 1 second during an intercom conversation until you hear a double beep. Both you and your Intercom Friend can control music playback. Sharing Music with an Intercom Friend during Intercom Conversation
HOLD
=
1s
SHARE MUSIC
“[Beep, Beep]”
Sena X1 Smart Cycling Helmet Firmware v1.0 | 39
TAP
=
or
1x MENU
B
INTERCOM FRIEND B
6. INTERCOM SETUP Intercom Pairing Two-Way Intercom
6.1 IntercomBlue Pairing flashing LED confirms = Up to three people can communicate via intercom intercoms are paired.
with the X1 Smart Cycling Helmet simply by pairing LED STATUS their headsets. Pairing with Intercom Friends
A
Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom
B
D
1. Press and hold the Center Buttons of two Bluetooth Modules for 5 seconds until you hear the voice prompt, “Intercom pairing”. Pairing with Intercom B
Universal Intercom Advanced Noise Control™
C
A
YOU HOLD
=
&
5s
B
INTERCOM FRIEND B
“Intercom pairing”
=
Red flashing light indicates device is now discoverable.
LED STATUS
Sena X1 Smart Cycling Helmet Firmware v1.0 | 40
&B
HOLD
=
5s
B
MENU
INTERCOM FRIEND B INTERCOM FRIEND B
“Intercom pairing” 6. INTERCOM SETUP “Intercom pairing”
Intercom Pairing Two-Way Intercom Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom Universal Intercom Advanced Noise Control™
LED STATUS
Red flashing light indicates = device is now discoverable. Red flashing light indicates = device is now discoverable.
LED STATUS
2. Tap the Center Button on either Bluetooth On Either One of the Devices Module and wait until the LEDs of both turn blue.
A One of the Devices On Either A YOU
or
YOU
or
B
TAP
=
1x
=
TAP
1x
B INTERCOM FRIEND B INTERCOM FRIEND B
Blue flashing LED confirms intercoms are paired. Blue flashing LED confirms = intercoms are paired.
= LED STATUS
Pairing with Intercom Friends LED STATUS Pairing with Intercom Friends
A A
B
C
D
B
C
D
Sena X1 Smart Cycling Helmet Firmware v1.0 | 41
MENU
6. INTERCOM SETUP Intercom Pairing Two-Way Intercom Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom Universal Intercom
3. Repeat steps 1 and 2 to pair with Intercom Friends C & D. Last-Come, First-Served
A
YOU
A
YOU
A
YOU
B
Intercom Friend 1
C
B
Intercom Friend 1
Intercom Friend 2
D
C
B
Intercom Friend 1
Intercom Friend 2
Intercom Friend 3
Advanced Noise Control™
Sena X1 Smart Cycling Helmet Firmware v1.0 | 42
MENU
6. INTERCOM SETUP 6.2 Two-Way Intercom Intercom Pairing
You can start or end an intercom conversation with an Intercom Friend by tapping the Center Button.
Two-Way Intercom
1. Tap once for Intercom Friend 1.
Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom Universal Intercom Advanced Noise Control™
Start/End Two-Way Intercom with Intercom Friend 1 Start/End D Two-Way Intercom with Intercom Friend 1
TAP
=
1x
=
TAP
Start/End Two-Way Intercom with Intercom Friend 1
D
INTERCOM FRIEND 1
D
1x TAP 1x
=
INTERCOM Start/End FRIEND 1
Two-Way Intercom with Intercom Friend 2
INTERCOM FRIEND 1 Start/End
Two-Way Intercom with Intercom Friend 2
2. Tap twice for Intercom Friend 2.
C
=
TAP
2x
Start/End Two-Way Intercom with Intercom Friend 2
C
INTERCOM FRIEND 2
C
INTERCOM Start/End FRIEND 2
= =
TAP
2x TAP 2x
Two-Way Intercom with Intercom Friend 3
INTERCOM FRIEND 2
Start/End with Intercom Friend 3 B Two-Way 3. Tap three times Intercom for Intercom Friend 3. TAP
=
3x
=
TAP
Start/End Two-Way Intercom with Intercom Friend 3
B
INTERCOM FRIEND 3
B
INTERCOM FRIEND 3
=
3x TAP 3x
INTERCOM FRIEND 3
Sena X1 Smart Cycling Helmet Firmware v1.0 | 43
MENU
6. INTERCOM SETUP 6.3 Multi-Way Intercom Intercom Pairing Two-Way Intercom Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom Universal Intercom Advanced Noise Control™
Multi-Way Intercom enables conference-call-style conversations with up to three Intercom Friends at the same time. While Multi-Way Intercom is in progress, mobile phone connection is temporarily disconnected. However, as soon as Multi-Way Intercom terminates, the mobile phone connection will be reestablished. 6.3.1 Starting a Three-Way Intercom Conference You (A) can have a Three-Way Intercom Conference with two other Intercom Friends (B & C) by establishing two intercom connections simultaneously. 1. Pair your headset (A) with those of two other Intercom Friends (B & C). Please refer to Section 6.1: “Intercom Pairing” for pairing instructions. Pair with Intercom Friends B & C
A B
C
You
Intercom Friend B
Intercom Friend C
Starting an Conversation 2. Start anIntercom intercom conversation with one of with Intercom Friend B the two friends in your intercom group. For example, you (A) may start an intercom A conversation with the Intercom Friend (B). Or, Intercom Friend (B) may start an B C intercom call with you (A). You
Intercom Friend B
Intercom Friend C
Starting an Intercom Conversation with Intercom Friend C
A Sena X1 Smart Cycling Helmet Firmware v1.0 | 44
Pair with Intercom Friends B & C
A B
MENU
C
You
Pair with Intercom Friends B & C
A 6. INTERCOM SETUP Intercom Friend B
Intercom Pairing Two-Way Intercom Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom Universal Intercom Advanced Noise Control™
Pair with Intercom Friends B&C Ban Starting Intercom Conversation You with Intercom Friend B
A A
Intercom FriendB B
You
B Starting an Intercom Conversation with Intercom Friend B
You
Intercom Friend B Intercom Friend B
A
Starting an Intercom Conversation with Intercom Friend B StartingBan Intercom Conversation You the 3. Then, youFriend (A) can with Intercom C call
Intercom Friend C
C
Intercom FriendC C
C Intercom Friend C Intercom Friend C
C second Intercom A Intercom Friend Friend (C), or the second A by making Intercom (C) may join the intercom an Intercom FriendB B FriendC C intercom call to you (A). You B C Starting an Intercom Conversation with Intercom Friend C
You
Intercom Friend B Intercom Friend B
A
Starting an Intercom Conversation with Intercom Friend C B Conference Three-Way You
Intercom FriendB B
B
Three-Way Conference
Intercom Friend C Intercom Friend C
C
A A Intercom FriendC C
C
You You
4. Now you (A) and two Intercom Friends Intercom Intercom (B & C) are having a Three-Way Intercom A Intercom Intercom Friend B Friend C Friend B Friend C Conference. Three-Way B Conference
Intercom FriendB B
Intercom Friend B
You
You
C A Intercom FriendC C
Intercom Friend C
Sena X1 Smart Cycling Helmet Firmware v1.0 | 45
MENU
6. INTERCOM SETUP Intercom Pairing Two-Way Intercom Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users
6.3.2 Starting a Four-Way Intercom Conference With three Intercom Friends connected, a new participant (D) can make it a Four-Way Intercom Conference by making an intercom call to either (B) or (C). Starting a Four-Way Intercom
A
C
B
D YOU
Intercom Friend C
Intercom Friend B
Intercom Friend D
6.3.3 Ending Multi-Way Intercom
Group Intercom
1. Press the Center Button for 1 second until you hear a beep to terminate all intercom connections.
Universal Intercom
2. Tap the Center Button to disconnect from your first Intercom Friend. Double tap the Center Button to disconnect from your second Intercom Friend.
Advanced Noise Control™
6.4 Three-Way Conference Phone Call with Intercom Users You can have a Three-Way Conference Phone Call by adding an Intercom Friend to the mobile phone conversation. 1. During a mobile phone call, tap the Center Button to invite one of your Intercom Friends to the conversation.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 46
MENU
6. INTERCOM SETUP Intercom Pairing Two-Way Intercom Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom Universal Intercom Advanced Noise Control™
Invite an Intercom Friend into Phone Conference
Invite an Intercom Friend into Phone Conference
=
ADD AN INTERCOM FRIEND Invite an Intercom TO CALL
=
TAP
1x TAP
Friend into Phone Conference
1x
ADD AN INTERCOM Disconnect Intercom from during Conference TAP FRIEND 2. To disconnect theFriend intercom a conference TO CALL
=
phone call, tap the Center Button.
Disconnect Intercom Friend from Conference ADD AN
INTERCOM FRIEND TO CALL DISCONNECT INTERCOM
TAP
=
1x
=
TAP
Disconnect Intercom Friend from Conference
End Phone DISCONNECT INTERCOM
1x
1x
Call TAP
= 1x HOLD End Phone Call the mobile phone call during a 3. To disconnect = 2s DISCONNECT conference phone INTERCOM for 2 seconds. END MOBILE EndCALL Phone Call END MOBILE CALL
call, press the Center Button
=
HOLD
=
HOLD
2s 2s
END MOBILE CALL
Note: When you have an incoming intercom call during a mobile phone call, you will hear a voice prompt, “Intercom requested.”
Sena X1 Smart Cycling Helmet Firmware v1.0 | 47
MENU
6. INTERCOM SETUP 6.5 Group Intercom Intercom Pairing Two-Way Intercom Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom Universal Intercom Advanced Noise Control™
Group Intercom allows you to instantly create a Multi-Way Conference Intercom with three of the most recently paired headsets. 1. Pair intercoms with up to three people you want in the Group Intercom. 2. Tap the (+) Button and the (-) Button simultaneously to begin Group Intercom. The alternating blue and red flashing lights indicates that the device is now in Group Intercom mode and you will hear a voice prompt, “Group intercom.” Start Group Intercom
TAP
= Start Group Intercom START GROUP INTERCOM
START GROUP INTERCOM LED STATUS
1x TAP
=
1x
= Greeen LED Flashing
LED Flashing = Greeen “Group intercom” LED STATUS
3. When all of the headsets are connected together, intercom” connected” everyone will“Group hear theintercom voice prompt, “Group intercom connected.” End Group Intercom
“Group intercom connected” HOLD
= End Group Intercom
1s
END GROUP INTERCOM
=
HOLD
1s
Sena X1 Smart Cycling Helmet Firmware v1.0 | 48
“Group intercom terminated”
= Greeen LED Flashing
MENU
LED STATUS
“Group intercom”
6. INTERCOM SETUP Intercom Pairing Two-Way Intercom
4. To terminate Group Intercom, press the Center Button for 1 “Group second intercom during Group Intercom. connected” You will hear a voice prompt, “Group intercom terminated.” End Group Intercom
Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom Universal Intercom Advanced Noise Control™
HOLD
=
1s
END GROUP INTERCOM
“Group intercom terminated”
6.6 Universal Intercom Universal Intercom allows you to have intercom conversations with users of non-Sena Bluetooth headsets. You can pair the X1 Smart Cycling Helmet with only one non-Sena headset at a time. The intercom distance depends on the performance of the Bluetooth headset to which it’s connected. When a non-Sena Bluetooth headset is paired with the Bluetooth Helmet, if another Bluetooth device is paired via Second Mobile Phone Pairing, it will be disconnected. 1. Execute Universal Intercom in the Configuration Menu. Please refer to Section 2.7: “Configuration Menu” for more details.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 49
MENU
6. INTERCOM SETUP Intercom Pairing Two-Way Intercom Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users Group Intercom
Access Universal Intercom in the Configuration Menu
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
TAP
=
3x
NAVIGATE BACKWARD 3X
“Universal intercom”
Universal Intercom Advanced Noise Control™
=
TAP
1x
EXECUTE
2. Put the non-Sena Bluetooth headset in Pairing Mode. The X1 Smart Cycling Helmet will automatically pair with a non-Sena Bluetooth headset.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 50
MENU
6. INTERCOM SETUP Intercom Pairing
3. You can have Two-Way Intercom or MultiWay Intercom communication with up to three Intercom Friends using non-Sena headsets by following the procedures described below.
Two-Way Intercom
Example of a Three-Way Universal Intercom Example of a Three-Way Universal Intercom
Multi-Way Intercom Three-Way Conference Phone Call with Intercom Users
You You Non-Sena Non-Sena Headset Headset
Example of a Four-Way Universal Intercom Example of a Four-Way Universal Intercom
Group Intercom Universal Intercom Advanced Noise Control™
Sena Sena Headset Headset
You You
Sena Sena Headset Headset Non-Sena Non-Sena Headset Headset
Non-Sena Non-Sena Headset Headset
6.7 Advanced Noise Control™ (Default: Enable) An Advanced Noise Control setting can be found in the Configuration Menu. Please refer to Section 2.7: “Configuration Menu” for more details. If Advanced Noise Control is enabled, background noise is reduced during intercom conversations. If Advanced Noise Control is disabled, the background noise is mixed with your voice while using the intercom
Sena X1 Smart Cycling Helmet Firmware v1.0 | 51
MENU
6. INTERCOM SETUP Intercom Pairing
Access Advanced Noise Control in the Configuration Menu
=
Two-Way Intercom Multi-Way Intercom
10s
ACCESS CONFIG. MENU
“Configuration menu”
Three-Way Conference Phone Call with Intercom Users Group Intercom
HOLD
TAP
=
6x
NAVIGATE BACKWARD 6X
Universal Intercom
“Noise control”
Advanced Noise Control™
=
TAP
1x
ENABLE OR DISABLE
Sena X1 Smart Cycling Helmet Firmware v1.0 | 52
MENU
7. USING THE FM RADIO 7.1 FM Radio On/Off FM Radio On/Off Seek and Save Radio Stations Scan and Save Radio Stations
To turn on or shut off the FM radio, press the (-) Button for 1 second until you hear a double beep. FM Radio On
=
Region Selection Radio Data System(RDS) Alternative (AF) Setting
1s
FM RADIO ON
Temporary Station Preset Navigating Preset Stations
HOLD
“[Beep, Beep]”
FM Radio Off
HOLD
=
1s
FM RADIO OFF
“[Beep, Beep]”
FM Station Guide
Sena X1 Smart Cycling Helmet Firmware v1.0 | 53
MENU
7. USING THE FM RADIO 7.2 Seek and Save Radio Stations FM Radio On/Off Seek and Save Radio Stations Scan and Save Radio Stations Temporary Station Preset Navigating Preset Stations Region Selection Radio Data System(RDS) Alternative (AF) Setting FM Station Guide
The “Seek” feature searches for radio stations.
1. Double tap the (+) Button or the (-) Button to search for radio stations. Seek Stations Forward
TAP
=
2x
=
TAP
2x
=
TAP
2x
=
TAP
Seek Stations Forward SEEK FORWARD
Seek Stations Backward SEEK FORWARD
Seek Stations Backward SEEK BACKWARD
Enter Preset Selection Mode
2x
2. To save the current station, press and hold the SEEK Center Button for 3 seconds until you hear the BACKWARD HOLD voice prompt, “Preset (#).”
=
3s
=
HOLD
Enter Preset Selection Mode ENTER PRESET MODE
ENTER PRESET MODE
3s
“Preset (#)”
Navigate Forward through Preset Stations
“Preset (#)”
TAP
=
1x
=
TAP
Navigate Forward through Preset Stations NAVIGATE FORWARD
Navigate Backward through Preset Stations NAVIGATE FORWARD
1x
Sena X1 Smart Cycling Helmet Firmware v1.0 | 54
Enter Preset= Selection Mode
2x
SEEK BACKWARD
HOLD MENU
=
3s
Enter Preset Selection Mode ENTER PRESET MODE
7. USING THE FM RADIO =
HOLD
3s
FM Radio On/Off Seek and Save Radio Stations Scan and Save Radio Stations Temporary Station Preset Navigating Preset Stations Region Selection Radio Data System(RDS) Alternative (AF) Setting FM Station Guide
3. Tap the (+) Button or the (-) Button to navigate “Preset (#)” ENTER through the preset numbers that you want to PRESET MODE store. Navigate Forward through Preset Stations
“Preset (#)” TAP
=
1x
Navigate Forward through Preset Stations NAVIGATE FORWARD
Navigate Backward through Preset Stations = NAVIGATE FORWARD
TAP
1x TAP
=
1x
Navigate Backward through Preset Stations NAVIGATE BACKWARD
Save Station=to the Preset Number
TAP
4. Press and hold the (+) Button for 1 second 1x to save the station in the preset number you choose. NAVIGATE Or, press and hold the (-) Button for 1 second HOLDto BACKWARD = station from memory. delete the 1s Save Station to the Preset Number SAVE TO PRESET #
Delete Station = from Memory SAVE TO PRESET #
HOLD
1s
HOLD
=
1s
Delete Station from Memory DELETE STATION
=
HOLD
1s
DELETE STATION
Sena X1 Smart Cycling Helmet Firmware v1.0 | 55
MENU
7. USING THE FM RADIO 7.3 Scan and Save Radio Stations FM Radio On/Off Seek and Save Radio Stations Scan and Save Radio Stations Temporary Station Preset Navigating Preset Stations Region Selection Radio Data System(RDS) Alternative (AF) Setting FM Station Guide
The “Scan” function automatically searches for radio stations, starting with the current station’s frequency, then up from there. 1. Press and hold the (+) Button for 1 second to scan for stations. Scan and Save Radio Stations
HOLD
=
1s
START SCANNING
Scan and Save Radio Stations Save the Current Station
2. The Sena tuner pauses at each station it finds for 8 seconds before moving to the next. HOLD
= TAP 1s 3. To save the current station, tap the Center = 1x Button. The station will be saved as the next START preset number. SCANNING SAVE STATION
Save the Current Station
“Preset (#)”
=
TAP
1x
Stop Scanning SAVE STATION
=
HOLD
“Preset (#)”
1s
STOP SCANNING
Stop Scanning
=
HOLD
1s
STOP SCANNING
Sena X1 Smart Cycling Helmet Firmware v1.0 | 56
Save the Current Station
MENU TAP
=
1x
SAVE STATION
7. USING THE FM RADIO FM Radio On/Off
“Preset (#)” 4. To stop scanning, press the (+) Button for 1 second. Stop Scanning
Seek and Save Radio Stations Scan and Save Radio Stations
HOLD
=
1s
STOP SCANNING
7.4 Temporary Station Preset
Temporary Station Preset
The Temporary Preset feature automatically finds and saves the nearest 10 radio stations without changing your existing preset stations.
Navigating Preset Stations
1. Tap the (+) Button three times to automatically find and save 10 stations. Temporary Stations
Region Selection Radio Data System(RDS) Alternative (AF) Setting FM Station Guide
=
TAP
3x
TEMPORARY STATIONS
2. The temporary preset stations will be cleared when the Bluetooth Module reboots.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 57
MENU
7. USING THE FM RADIO 7.5 Navigating Preset Stations FM Radio On/Off Seek and Save Radio Stations
Using the methods above, up to 10 radio stations can be stored. Press and hold the Center Button for 1 second to navigate through the saved stations. Navigate through Preset Stations
Scan and Save Radio Stations Temporary Station Preset Navigating Preset Stations
=
HOLD
1s
NAVIGATE FORWARD
Note: You can use the Sena Device Manager or the Sena Smartphone App to save the preset stations.
Region Selection Radio Data System(RDS) Alternative (AF) Setting FM Station Guide
Sena X1 Smart Cycling Helmet Firmware v1.0 | 58
MENU
7. USING THE FM RADIO FM Radio On/Off Seek and Save Radio Stations Scan and Save Radio Stations Temporary Station Preset Navigating Preset Stations Region Selection Radio Data System(RDS) Alternative (AF) Setting FM Station Guide
7.6 Region Selection (Default: Worldwide) You can select the proper FM frequency range for your location from the Sena Device Manager or the Sena Smartphone App. Using the region setting, you can optimize the seek function to avoid unnecessary frequency ranges. Region
Frequency range
Step
Worldwide
76.0 ~ 108.0 MHz
± 100 kHz
North America, South America and Australia
87.5 ~ 107.9 MHz
± 200 kHz
Asia and Europe
87.5 ~ 108.0 MHz
± 100 kHz
Japan
76.0 ~ 95.0 MHz
± 100 kHz
7.7 Radio Data System(RDS) Alternative(AF) Setting (Default: Enable) The RDS AF setting can be found in the Configuration Menu. Please refer to Section 2.7: “Configuration Menu” for more details. When radio station signals get too weak for good reception, with RDS AF enabled, the Sena radio receiver re-tunes to a station with better reception. If RDS AF is disabled, you’ll have to find stronger stations manually.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 59
MENU
7. USING THE FM RADIO FM Radio On/Off Seek and Save Radio Stations
Access RDS AF Setting in the Configuration Menu
=
“Configuration menu”
Temporary Station Preset
TAP
=
7x
NAVIGATE FORWARD 7X
Region Selection
“RDS AF setting”
Radio Data System(RDS) Alternative (AF) Setting FM Station Guide
10s
ACCESS CONFIG. MENU
Scan and Save Radio Stations
Navigating Preset Stations
HOLD
=
TAP
1x
ENABLE OR DISABLE
Sena X1 Smart Cycling Helmet Firmware v1.0 | 60
MENU
7. USING THE FM RADIO 7.8 FM Station Guide (Default: Enable) FM Radio On/Off Seek and Save Radio Stations Scan and Save Radio Stations
The FM Station Guide setting can be found in the Configuration Menu. Please refer to Section 2.7: “Configuration Menu” for more details. When FM Station Guide is enabled, FM station frequencies are given by voice prompts as you select preset stations. When FM Station Guide is disabled, the voice prompts on FM station frequencies will not be given as you select preset stations. Access FM Station Guide in the Configuration Menu
Temporary Station Preset Navigating Preset Stations
=
10s
ACCESS CONFIG. MENU
Region Selection
“Configuration menu”
Radio Data System(RDS) Alternative (AF) Setting FM Station Guide
HOLD
TAP
=
8x
NAVIGATE FORWARD 8X
“FM Station Guide setting”
=
TAP
1x
ENABLE OR DISABLE
Sena X1 Smart Cycling Helmet Firmware v1.0 | 61
MENU
8. GENERAL SETTINGS 8.1 Function Priority Function Priority Firmware Updates Voice Prompts Deleting All Bluetooth Pairing Information
The headset prioritizes connected devices in the following order: (highest)
Mobile phone
Intercom
Music sharing via Bluetooth stereo
FM radio (lowest)
Bluetooth stereo music
A lower-priority function gets interrupted by a higher-priority function. For example, stereo music will be interrupted by an Intercom Conversation; an Intercom Conversation will be interrupted by an incoming mobile phone call.
8.2 Firmware Updates The X1 Smart Cycling Helmet supports firmware upgrades. You can upgrade the firmware using the Sena Device Manager. Please refer to Section 2.6.1: “Sena Device Manager” for more details. Please visit sena.com to check for the latest software downloads.
Click Here to Visit Sena.com 8.3 Voice Prompts A Voice prompt setting can be found in the Configuration Menu. Please refer to Section 2.7: “Configuration Menu” for more details. If Voice prompt is enabled, you can hear Voice prompts for different kinds of features. If Voice prompt is disabled, Voice prompts are silenced except for those in the Configuration Menu, battery level indication, speed dial, and FM radio functions.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 62
MENU
8. GENERAL SETTINGS Function Priority Firmware Updates Voice Prompts
Access Voice Prompt in the Configuration Menu
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
Deleting All Bluetooth Pairing Information
TAP
=
6x
NAVIGATE FORWARD 6X
“Voice prompt”
=
TAP
1x
ENABLE OR DISABLE
Sena X1 Smart Cycling Helmet Firmware v1.0 | 63
MENU
8. GENERAL SETTINGS Function Priority Firmware Updates Voice Prompts Deleting All Bluetooth Pairing Information
8.4 Deleting All Bluetooth Pairing Information A Delete All Bluetooth Pairing Information setting can be found in the Configuration Menu. Please refer to Section 2.7: “Configuration Menu” for more details. Tap the Center Button when in this menu to Delete All Bluetooth Pairing Information stored in the headset. Access Delete All Pairings in the Configuration Menu
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
TAP
=
5x
NAVIGATE BACKWARD 5X
“Delete all pairings”
=
TAP
1x
EXECUTE
Sena X1 Smart Cycling Helmet Firmware v1.0 | 64
MENU
9. REMOTE CONTROL Pairing with the Remote Control
You can remotely control the Bluetooth Module using Sena Remote Control devices (sold separately) such as a Handlebar Remote or a Wristband Remote. This eliminates the need to remove your hands from the handlebars for button operations.
9.1 Pairing with the Remote Control 1. Turn on the Bluetooth Module and the Remote Control device. 2. Execute Remote Control Pairing in the Configuration Menu. Please refer to Section 2.7: “Configuration Menu” for more details. Access Remote Control Pairing in the Configuration Menu
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
TAP
=
4x
NAVIGATE BACKWARD 4X
“Remote control pairing”
=
TAP
1x
EXECUTE
Enter Pairing ModeSena X1 Smart Cycling Helmet Firmware v1.0
| 65
ACCESS CONFIG. MENU
TAP
=
4x
MENU
NAVIGATE BACKWARD 4X
“Configuration menu”
9. REMOTE CONTROL “Remote control pairing” Pairing with the Remote Control
NAVIGATE BACKWARD 4X
EXECUTE
TAP
=
4x
=
TAP
1x “Remote control pairing”
Enter Pairing Mode
3. Enter pairing mode in the Remote Control device. The Bluetooth Module will automatically connect with Enter the Remote Control device in TAP Pairing Mode = You will hear a voice prompt,1x pairing mode. on Remote Control. “Remote control connected,” when they are EXECUTE REMOTE successfully paired. CONTROL Enter Pairing Mode
“Remote control connected”
Enter Pairing Mode
= on Remote Control. REMOTE CONTROL
“Remote control connected”
Sena X1 Smart Cycling Helmet Firmware v1.0 | 66
MENU
10. TROUBLESHOOTING Fault Reset Factory Reset
Please visit sena.com for answers to frequently asked questions. This detailed online FAQ section deals with troubleshooting, illustrates case studies and contains tips on using the Sena X1 Smart Cycling Helmet.
Click Here to Visit Sena.com 10.1 Fault Reset When the helmet’s Bluetooth Module is not working properly, you can easily reset the unit: 1. Locate the pinhole reset button below the (+) Button. 2. Gently insert a paper clip into the hole and press and Fault Reset Button for 1 second with light pressure. Fault Reset
=
TAP
1x
FAULT RESET
3. The communication module will shut down. Note: Fault Reset will not restore the Bluetooth Module to factory default settings.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 67
MENU
10. TROUBLESHOOTING 10.2 Factory Reset Fault Reset Factory Reset
To erase all of your settings and start fresh, the headset can be restored to factory default settings using the Factory Reset feature in the Configuration Menu. Please refer to Section 2.7: “Configuration Menu” for more details. Access Factory Reset in the Configuration Menu
HOLD
=
10s
ACCESS CONFIG. MENU
“Configuration menu”
TAP
=
2x
NAVIGATE BACKWARD 2X
“Factory reset”
=
TAP
1x
EXECUTE
Sena X1 Smart Cycling Helmet Firmware v1.0 | 68
MENU
11. MAINTENANCE AND CARE The inner lining of the Sena X1 Smart Cycling Helmet is completely removable. Its headliner can be washed by hand using only water, mild soap, at a maximum temperature of 30ºC (86ºF), and nonabrasive cloths to clean the helmet’s shell, pads and retention system. Allow the padding to dry at room temperature. Store the helmet in a dry, dark, well-ventilated location, out of the reach of children and animals. High temperatures (above 110ºF, 43ºC) may melt the helmet’s shell. WARNING: •N ever use gasoline, diesel fuel, thinners or solvents to clean the helmet. These substances can cause serious damage to the helmet, even though the resulting damage may not be visible. This helmet can be damaged by contact with common substances (for example, certain solvents (ammonia), cleaners (bleach), paints, abrasives) and this damage may not be visible to the wearer. Do not use this helmet if it has been exposed to such substances. The full safety function of the helmet can no longer be guaranteed if exposed to damaging substances. •D o not store your helmet in your car or anywhere else near a heat source. Do not use if the shell has been melted or deformed. Always position the helmet so that it cannot fall to the floor. Damage that occurs in this way is not covered by the warranty. •D o not attach anything to your helmet, including mirrors or lights.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 69
MENU
11. MAINTENANCE AND CARE The shell of this helmet is constructed of expanded polymer foam. Ventilation holes may allow harmful objects to pass in the helmet interior. The protective capability of your helmet will diminish over time, dependent upon many factors such as dents, dings, and exposure to pollution, harmful chemicals and long term exposure to the sun. Sena recommends that helmets be replaced after five years. Note: The useful life of your helmet may be less than five years as a result of exposure to sunlight, rough, handling/storage that results in dents or cuts or as a result of heavy use.
Sena X1 Smart Cycling Helmet Firmware v1.0 | 70
MENU
Copyright © 2017 Sena Technologies, Inc. All rights reserved. © 1998–2017 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. Prism™, Bluetooth Audio Pack for GoPro®, Cavalry™, X1™, X1 Pro™ FreeWire™, Tufftalk™, 30K™, 20S™, 10S™, 10C™, 10C Evo™, 10U™, 10Upad™ 10R™, 3S™, SMH10™, SMH10R™, SMH5™, SMH5-FM™, SPH10™, SPH10H™, SPH10H-FM™, Expand™, Bluetooth Mic & Intercom™, RC1™, RC3™, RC4™, Handlebar Remote™, Wristband Remote™, SM10™, SR10™, SR10i™ are trademarks of Sena Technologies, Inc. or its subsidiaries. These trademarks may not be used without the express permission of Sena. GoPro® is a registered trademark of Woodman Labs of San Mateo, California. Sena Technologies, Inc. (“Sena”) is not affiliated with Woodman Labs, Inc. The Sena Bluetooth Pack for GoPro® is an aftermarket accessory specially designed and manufactured by Sena Technologies, Inc. for the GoPro® Hero3 and Hero4 allowing for Bluetooth capabilities. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. iPhone® and iPod® touch are registered trademarks of Apple Inc. Version 1.0.0
Sena X1 Smart Cycling Helmet Firmware v1.0 | 71
