Preview only show first 10 pages with watermark. For full document please download

Smart Fitness Scale Tx–41

   EMBED


Share

Transcript

Technaxx® Smart Fitness Scale TX–41 User Manual This product complies with the requirements of the standards referred to council directive R&TTE 1999/5/EC. Here you find the Declaration of Conformity: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using the device the first time, read the user manual carefully. Take control of your health by daily checkup of your physical fitness Smart Fitness Scale for measuring and analyzing your weight and BMI values (Body Mass Index); they can be saved in your personal My Fitness APP. Changes in weight and BMI can be shown as graphic in the My Fitness APP Battery Status Indicator & Overload Indicator Bluetooth 4.0 connection with mobile devices Free iOS and Android APP Supports by setting goals and to reduce weight Compete and share your success with friends via Facebook & Twitter Tempered 6mm glass platform, resistant to scratches and abrasion 2. Quick User Guide 1. 2. 3. 4. 5. Search for Technaxx “My Fitness” in the APP Store or in Google Play. Download the free APP and install it on your mobile device. Open the battery cover on the back and place the CR2032 lithium cell battery. Step on the scale to switch it on. Open the APP. Choose your personal account. Pair the scale with your mobile device (e.g. iPhone/iPad or Android) [see 3.3.] Step again on the scale. Your weight and your height will sync to your mobile device. After the Bluetooth connection, get off the scale. 3. Basic functions 3.1. When you use scale the first time, place the scale on a flat hard ground, after you installed the battery. The LCD display is ON after approx. 10 seconds. Step on the scale to switch it ON. While weighing, avoid any influence of scale veracity. When you get off, the digital display stays on. The scale will switch OFF in about 15 seconds automatically. 3.2. Open your mobile devices and start Bluetooth. 3.3. First you have to step on the scale, then start “My Fitness” and press the symbol at the right side of your mobile device. When you step on the scale and stand steady, the scale will measure automatically and transfer your weight to the APP “My Fitness” [see 7. User interface]. Please maintain your body balance and do not move. The numerical value of your weight will be locked after flicker for 2 times. This numerical value is your current weight. This weight will be sent out to your mobile device via Bluetooth. The scale can be used continuously. When your last weight is saved on your mobile device, you can re-weight or let another person weighing. If another person steps on the scale, your actual BMI (Body Mass Index) would be different with the BMI shown on your mobile device, because the height of each person and other factors are different. 4. Unit conversion The scale has 3 options of unit: kilogram (KG), pound (LB for Great Britain) and pound (ST for America). When the scale starts and becomes zero, you can press on the button of the bottom of the scale. Then you can change unit between KG, LB or ST. Choose the unit you need. When you start up again, the scale keeps the last unit. Example: A person’s weight is 80,7 KG. In normal LB it is shown on the display the following weight: When the unit is ST (Stones), the display shows 12:8 1/8 as LB for the above mentioned person’s weight. 5. Overload function When the scale is overloaded (more than 180 KG / 396 LB), the digital display will show the symbol (= Error). 6. Low battery indicator When the battery capacity is very low, the digital display will show the symbol ((LO = LOW). 7. User interface (Here you see pictures of the user interface) Technical specifications Bluetooth version 4.0 Your Hardware version must support BT 4.0 Display 1,25" LCD display (3,18 cm) Displays in 0.1 kg (0.21b) steps; kg/b selectable Power supply CR2032 lithium cell battery* (*included in delivery) Current DC 3V and ≤15mA Specific range & Unit 3 – 180 KG / 6.6 – 396 LB Division 1KG = 2.2 LB; 1D = 100g or 0.2 LB UART transfer Automatic Weight will be sent out to your mobile divice via Bluetooth module after locking-in. Switch ON (when you step on the scale) and automatic weigh / Switch OFF after ~10 seconds when you step of the scale. Low battery indicator Automatic shutdown after show ”LO” Material ABS and 6mm tempered glass (platform) Working temperature 10°C – 40°C Weight / Dimensions 1.8 kg / (L) 31.0 x (W) 30.0 x (H) 2.3 cm Smart Fitness Scale TX-41, 1x CR2032 cell battery, User Manual Apple iOS Devices: iPhone 4S / 5 / 5S / 5C, iPod touch 5, iPad 4, iPad mini / iPad mini with retina display / iPad Air Package Contents (Apple iPhone iOS version 7.0 or above) Android Devices: Samsung S3 / S4 / S5 / Galaxy Note 2 / Galaxy Note 3 (Android version 4.3 or above; approve which Android version your Smartphone is using) Security and Disposal Hints for Batteries: Hold children off batteries. When a child swallowed a battery go to a doctors place or bring the child into a hospital promptly! Look for the right polarity (+) and (--) of batteries! Always change all batteries. Never use old and new batteries or batteries of different types together. Never short, open, deform or load up batteries! Risk of injury! Never throw batteries into fire! Risk of explosion! Hints for Environment Protection: Packages materials are raw materials and can be recycled. Do not disposal old devices or batteries into the domestic waste. Cleaning: Protect the device from contamination and pollution (use a clean drapery). Avoid using rough, coarse-grained materials/solvents/other aggressive cleaner. Wipe the cleaned device. Important Notice: Should battery fluid leak from a battery, wipe the battery-case with a soft cloth dry. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany