Transcript
SMART Kapp 84” Guide Connecting to the SMART Kapp
1: 2:
Download the app ‘SMART kapp’ from the Apple App Store or the Google Play Store. Open the app and scan the QR code on the bottom right corner of the SMART board.
5:
To save a screenshot to a flash drive, first insert it into the USB port on the side of the board and then press the USB button near the bottom right corner of the board.
6:
To disconnect from the SMART Kapp, press and hold the bluetooth button near the bottom right corner of the board until it turns red.
Using the SMART Kapp
3:
Use the Smart Kapp as you would any ordinary dry erase board.
4:
To save a screenshot to your phone of everything written on the board, press the camera button near the bottom right corner of the board.
(See Circulation Desk for markers and eraser)
Cleaning • Spray a small amount of water or cleaner (non-alcohol based) onto a clean lint-free cloth or paper towel and wipe the board. • DO NOT SPRAY LIQUIDS DIRECTLY ONTO THE SURFACE OF THE BOARD.
4.
5.
6.
2.
Best Use • Do not put your hand or arm on the board while writing; inaccuracies may arise. • DO NOT USE PERMANANT MARKERS ON THIS BOARD. DRY ERASE ONLY.
If you have any classroom technology questions or concerns please contact the IT Service Desk X5500 or www.stevens.edu/servicedesk
