Transcript
SMART OPTICAL FIBER SOLUTIONS www.free-wave.eu
|
www.ritar.com
Have you ever seen the light?
FLARE 2-WAYS OPTICAL FIBER WIDEBAND SYSTEM FLARE AS OPTICAL EXTENDER TERRESTRIAL
LNB HVHV
OPTICAL FIBER COAXIAL
FLARE is a bi-directional solution made up of 2-wavelength optical transmitter and receiver, capable of guaranteeing various installation options. The bandwidth ranges from 100 to 2.150 MHz and is suitable for both satellite and terrestrial signals. FLARE has been designed to manage also the SCR protocol. FLARE is such an effective system that it can virtually distribute the satellite and terrestrial signal to an endless number of user sockets. It is, therefore, suitable for household installations and holiday resorts to distribute both satellite and terrestrial signals to all end users. It has a high flexibility: the price-performance ratio makes it convenient for small/medium size installations (a few user sockets) as well as for big size installations. The basic configuration comprises a transmitter module (Head Unit) and a receiver module (Node Unit). It is possible to purchase separately further receiver modules to enlarge the distribution system. Up to 16 receivers can be connected to the transmitter unit through optical splitters. The ability to manage the SCR and DISEqC codes makes it particularly flexible, this translates into the possibility of being used in various installation solutions. It is a new product on the market, it hasn’t been realised by others before. FLARE is an idea of RITAR, which has taken care of its development, engineering and manufacturing; everything done in Italy. It is 100% Italian. FLARE has been designed to be able to work on two different wavelengths: 1.310 and 1.550 nm and, therefore, it is able to distribute the frequency range from 100 to 2.150 MHz as well as transmitting and receiving the SCR and DISEqC codes, which give the installers the possibility to plan mixed and complex solutions. In this way it is possible to send the DISEqC control signals from the decoder to the satellite dish on the same optical fiber used to transport the first IF Sat signals. The further possibility to work on two different wavelengths allows it to distribute the 4 Sat ranges (high and low in two polarities) wherever it is needed within the distribution network. Thanks to the optical fiber link, it is possible to install the receiving antennae at a distance ranging from several hundreds of metres to kilometres from the user sockets.
FLARE HEAD UNIT
SCR MULTISWITCH
COAXIAL SPLITTER
SCR MULTISWITCH
SCR MULTISWITCH
LNB HVHV
OTHER USERS CONNECTED WITH OPTICAL FIBER
COAXIAL SCR SYSTEM
FLARE AND SCR MULTISWITCH LNB HVHV
TERRESTRIAL
USERS
OPTICAL FIBER
The number of decoders depends by the number of the SCR router outputs. For example 8 outputs are connected to 8 decoders.
COAXIAL
DEMIX SAT TV
SCR MULTISWITCH
FLARE HEAD UNIT
FLARE NODE UNIT
FLARE NODE UNIT
COAXIAL SPLITTER
DEMIX SAT TV
DEMIX SAT TV
F101720
F925004
F926012
Kit LNB + optical fiber transmitter, frequency 950-5950 Mhz, output 2x32 PON (single mode fiber). The kit is made by: • 1 optical fiber LNB F925004 • F101632 fiber optical transmitter • 1 HF cable P700318
• universal LNB with optical fiber output; • it minimizes the losses on long distance (max. 0.3dB/km); • with 7dBm on optical fiber output it supports a split up to 32 points (optical fiber nodes); • second window 1310nm.
An innovative new design Fibre LNB that converts 4 Universal IF bands, to a single optical output, capable of supplying 32 Virtual Converters over a 10 kilometre radius. Designed for dishes supplied with their own feed-horn. Typically used with motorised dishes.
KIT LNB + Tx, WITH POWER SUPPLY
LNB WITH OPTICAL FIBer output
LNB C 120 WITH OPTICAL Tx
OPTICAL FIBER DISTRIBUTION 256 NODES OPTICAL FIBER LNB
TERRESTRIAL OPTICAL FIBER
ACTIVE SPLITTER 4 WAYS
COAXIAL FO = OPTICAL FIBER
SPLITTER ATTIVO 4 VIE
PSU OPTICAL FIBER TRANSMITTERS.
OPTICAL FIBER TRANSMITTER
Every transmitter combines the optical fiber LNB signal with the DVB-T signal.
FOUR 2-WAYS F.O. SPLITTERS F.O. spliters with 2 outputs. Every ouput is connected with one 4-way splitter.
EIGHT 4-WAYS FO SPLITTERS FO spliters with 4 outputs. Every ouput is connected with one 4-way splitter.
SIXTYFOYR 4-WAYS FO SPLITTERS FO splitter with 4 outputs. Every output manages a NODE. 64 splitters manage 256 NODES
WIDEBAND AMPLIFIER
OPTICAL FIBER TRANSMITTER
OPTICAL FIBER TRANSMITTER
OPTICAL FIBER TRANSMITTER
FO 2x 2-WAYS SPLITTERS
2x 2-WAYS SPLITTERS
2x 2-WAYS SPLITTERS
2x 2-WAYS SPLITTERS
FO 4x 4-WAYS SPLITTERS
FO 4x 4-WAYS SPLITTERS
FO 4x 4-WAYS SPLITTERS
FO 4x 4-WAYS SPLITTERS
FO FO 8x 8-WAYS 8x 8-WAYS SPLITTERS SPLITTERS
FO FO 8x 8-WAYS 8x 8-WAYS SPLITTERS SPLITTERS
FO FO 8x 8-WAYS 8x 8-WAYS SPLITTERS SPLITTERS
FO FO 8x 8-WAYS 8x 8-WAYS SPLITTERS SPLITTERS
256 NODES A node is made by a Quattro HVHV+TV FO receiver or by a conventional multiswitch
HOUSES/BUILDINGS Every NODE manages a house/building.
1-32 NODES
33-64 NODES
65-96 NODES
97-128 NODES
129-160 NODES
161-192 NODES
193-224 NODES
225-256 NODES
F101632
F101831
P700318
F101632 transmitter is designed to mix SAT and DVB-T signals. The combined signals are modulated on 2 different frequencies and they are transmitted over a single cable. The modulated signal is divided on two optical outputs. Each output can serve 32 points. The product is IP65 and can be mounted outdoors.
4-ways HF spliiter, connector type “N”, 950-5950Mhz, for F101632.
HF cable connector typo “N”, 950-5950Mhz, it connects F700356 and F101632. Lenght 2 meters.
OPTICAL TRANSMITTER + DTT-DAB INPUT
4-WAYS HF SPLITTER, CONNEcTOR TyPO “N”, 950-5950Mhz
HF CABLE, CONNEcToR TyPe “N”, for F700356 and f10163
F101588, F101589
F101608, F101609
The virtual converter receives an optical signal via a passive optical network (PON) from the optical LNB. Specifications: • converts optical SAT-IF signals into IF; • solutions for both direct STB connection and multi switch use supports from single direct connection and up to a 32 way passive optical network; • requires an optical LNB front-end; • 4 polarities in one single fibre optical cable.
The GIFibreMDU converters work together with GI Optical Output LNB using a passive optical fiber network (PON). The converters can be linked directly to GI Optical Output LNB. Specifications: • it transform the the optical signal into IF signal; • it supports up to four STB using a single optical fiber connection; • plug-and-play; • powered by STB.
F101822
FRWFOR1MINI
virtual optical converter
DTT CONVERTER, virtual OPTICAL-coax Output
DTT converter, virtual optical-coax output, it requires local power supply.
virtual OPTICAL-coax CONVERTER, Quad output, DTT output
OPTICAL MININODE RECEIVER, 40-862 MHZ
• small housing of the unit, low energy consumption. • 1 GHz RF working platform with advanced GaAs technology. • integrated 0dB or 5dB forward equalizer, to be changed with jumper. • optical input level range from –8dBm to 0dBm. • motherboard mounted in SMD technology. • reverse channel FP-transmitter. • highly efficient switched power supply
FRWFOT1
FRWFOR1
• compact die cast housing , low power consumption; • high quality DFB Laser, optoinsulator built in; • 1 GHz bandwidth; • laser power monitor, for fault detection or laser lifetime; • RF drive level adjustment, with predistorter circuit; • SMD tecnology; • suitable for small point-to-point link with AMVSB signals mixed with digital ones (COFDM/QAM); • point to multipoint link with good optical budget, if used with COFDM only. • hi-rel switching power supply.
• small housing of the unit, low energy consumption; • 1 GHz RF working platform with advanced GaAs technology; • integrated 0dB or 5dB forward equalizer, to be changed with jumper; • optical input level range from -9dBm to 0dBm; • the unit is configured as two-way even RF level output; • motherboard mounted in SMD technology; • adapted two-way plug-in diplexfilter, so the output channel range can easily be changed; • reverse channel FP-transmitter; • highly efficient switched power supply.
optical fiber transmitter
MININODE FTTH OPTICAL FIBER RECEIVER
ANALOG SIGNAL DISTRIBUTION (AM VSB) ON OPTICAL FIBER (UP TO 3)
ANALOG SIGNAL DISTRIBUTION (AM VSB) ON OPTICAL FIBER (UP TO 16)
FRWFOT1
FRWFOT1
PASSIVE FO SPLITTER
PASSIVE FO SPLITTER
FRWFOR1
FRWFOR1
FRWFOR1
4x FRWFOR1
4x FRWFOR1
4x FRWFOR1
4x FRWFOR1
FRWOTX13
FRWOR860T-2M
• 860MHz bandwidth; • high-performance DFB laser to increase the signal quality in HFC; • low noise, low distortion and pre-AMP to meet low RF input signal; • incorporating circuit design built with RF AMP and VCA, and multi-point pre-distortion correction; • separate CPU control board in each OTX module to support effective control; • effective RF overdrive protection for LD ,low optical power output alarm, automatic LD shutdown; • effective ATC (Automatic Temperature Control) and APC (Automatic Power Control); • elective AGC (Automatic Gain Control) and field MGC (Manual Gain Control); • RS232/485 and RJ45 Ethernet interfaces • advanced high efficiency switching power supply to meet the AC voltage wide fluctuating; • reliable thermal structure design to ensure high stability and long operating life of the equipment.
FRWOR860T-2M is a two ways optical node with two outputs used for HFC network. This equipment has specials of high- performance, reliability and low price. Features: • water-resistant; • switch power supply Optical level use LED to display; • -20dB level for output test
OPTICAL FIBER TRANSMITTER TV RF 13DBM
OPTICAL FIBER RECEIVER
FRWFOS[2/3/4/5]WBSFC
FRWFOSBC[90/80/70]FC
FRWFOS2WBSFC: 2-ways optical fiber DW splitter, connector FC female; FRWFOS3WBSFC: 3-ways optical fiber DW splitter, connector FC female; FRWFOS4WBSFC: 4-ways optical fiber DW splitter, connector FC female; FRWFOS5WBSFC: 5-ways optical fiber DW splitter, connector FC female
FRWFOSBC90FC: 2-ways optical fiber DW coupler 90/10, connector FC female; FRWFOSBC80FC: 2-ways optical fiber DW coupler 80/20, connector FC female; FRWFOSBC70FC: 2-ways optical fiber DW coupler 70/30, connector FC female.
FRWFOSC[7030/8515]FC
FRWFOS[2/3/4/5/6/8]WSFC
OPTICAL DW SPLITTER 2/3/4/5 WAYS, CONNECTOR FC FEMALE
4-WAYS OPTICAL DW COUPLERs, WITH 25cm OF PRETERMINATED OPTICAL FIBER FC
FRWFOSC8515FC: 4-ways optical DW 85/15, with 25cm of preterminated optical fiber FC; FRWFOSC7030FC: 4-ways optical DW 70/30, with 25cm of preterminated optical fiber FC; FRWFOSC5545FC: 4-ways optical DW 55/45, with 25cm of preterminated optical fiber FC; FRWFOSC1090FC: 4-ways optical DW 10/90, with 25cm of preterminated optical fiber FC.
2-WAYS OPTICAL DW COUPLERS, CONNECTOR FC FEMALE
OPTICAL DW SPLITTERs 2/3/4/5/6/8 WAYS, WITH 25cm OF PRETERMINATED OPTICAL FIBER FC
FRWFOS2WSFC: 2-ways optical DW splitter, with 25cm of preterminated optical fiber FC; FRWFOS3WSFC: 3-ways optical DW splitter, with 25cm of preterminated optical fiber FC; FRWFOS4WSFC: 4-ways optical DW splitter, with 25cm of preterminated optical fiber FC; FRWFOS5WSFC: 5-ways optical DW splitter, with 25cm of preterminated optical fiber FC; FRWFOS6WSFC: 6-ways optical DW splitter, with 25cm of preterminated optical fiber FC; FRWFOS8WSFC: 8-ways optical DW splitter, with 25cm of preterminated optical fiber FC;
FRWFOSNC[9010/8020/7030/6040]FC
2-waYS OPTICAL dw COUPLERS, WITH 25cm OF PRETERMINATED OPTICAL FIBER FC FRWFOSNC9010FC: 2-ways optical DW coupler 90/10, with 25cm of preterminated optical fiber FC; FRWFOSNC8020FC: 2-ways optical DW coupler 80/20, with 25cm of preterminated optical fiber FC; FRWFOSNC7030FC: 2-ways optical DW coupler 70/30, with 25cm of preterminated optical fiber FC; FRWFOSNC6040FC: 2-ways optical DW coupler 60/40, with 25cm of preterminated optical fiber FC.
FOFAL[***]FC
SINGLE MODE PATCH CORD LSZH, STEEL DOUBLE-ARMED PRETERMINATdE, FC/FC, COLOUR WHITE
FOFAL001FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 1m; FOFAL003FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 3m; FOFAL005FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 5m; FOFAL010FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 10m; FOFAL015FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 15m; FOFAL020FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 20m; FOFAL025FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 25m; FOFAL030FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 30m; FOFAL040FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 40m; FOFAL050FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 50m; FOFAL075FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 75m; FOFAL100FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 100m; FOFAL150FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 150m; FOFAL200FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 200m; FOFAL250FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 250m; FOFAL300FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 300m; FOFAL350FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 350m; FOFAL400FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 400m; FOFAL450FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 450m; FOFAL500FC: patch cord SM LSZH, double-armed LSZH, preterminated, FC/FC, colour white, 500m.
FRWPATCHMFCFC
FRWFCSCA09SYE1
OPTICAL PATCH CORD Single Mode PRETERMNATED FC/FC
OPTICAL PATCH CORD SINGLE Mode PRETERMNATed FC/PC-Sc/APC
ADAPTER FOR PRETERMINATED PATCH CORD FC/FC
Optical patch cord Single Mode , preterminated FC/FC 1,5m
Optical patch cord Single Mode, preterminated FC/PC-SC/APC, 1m
Adapter for preterminated patch cord FC/FC
F700251
FRWBFCFCPRO
ADAPTER FOR PRETERMINATED PATCH CORD FC/sC
screw adapter for preterminated patch cord FC/FC
Adapter for preterminated patch cord FC/SC
Screw adapter for preterminated patch cord FC/FC
F700253
F700282
Combined Optical Power And RF Satellite Meter
FRWFCSH
FRWBFCTRACK
SINGLE MODE FC CONNECTOR
TRACTION CLIP ON FC/PC ADAPTER FOR PRETERM. PATCH CORD FC/FC
Connettore FC Single Mode prelappato a montaggio rapido.
Traction clip on FC/PC adapter for preterminated patch cord FC/FC.
• Measure optical power in dBm whilst viewing the spectrum; • view the full satellite band in real time, ensuring that all transponders are available; • identify the channel and position from the satellite; • measure Level, SNR, and BER at the touch of a button; • store satellite settings as favourites in the memory; • use DiSEqC commands for the setting of motorised and switches.
FCOPHD1
KIT TRASMITTER + RECEUVER HDMI (FULL HD) FOR OPTICAL FIBER
• Transmission media: 50/125 Multi-Mode; • extends Full HD HDMI video to 300 meters away over one single core fiber; • supports up to 1080p/36-bit/60Hz resolution; • fully HDCP compliant; • supports infrared blaster feature extending the remote controller function to 300 meters away; • supports HDMI audio; • operation temperature: from 0°C to 50°C; • dimensions 101x89x24mm (for transmitter and receiver); • weight 200g (for transmitter and receiver)
FOFALM050LC
multi mode PATCH CORD 50/125 LSZH ARMED PRETERMINATED
Multi mode patch cord 50/125 LSZH, armed preterminated LC/ LC. Lenght (meters): 30, 50, 100, 150, 200, 300
FRWOT1VTA2SMFC
FRWOT1VRA2SMFC
Video + audio stereo L+R optical transmitter, single mode, FC/PC output, 20Km range.
Video + audio stereo L+R optical receiver, single mode, FC/PC output, 20Km range.
Video + Audio Stereo OPTICAL TRANSMITTER, Single mode , FC/PC output
NMMC100STMM
OPTICAL MULTI MODE MEDIA CONVERTER TX / RX FOR LAN NETWORKS
Video + Audio Stereo OPTICAL RECEIVER, Single mode , FC/PC output
NMOFMCWTRFC20
NMMC13GBFC20
Kit optical WDM transmitter + receiver for LAN networks 10/100 on optical fiber, single mode. FC/PC output, 20Km range.
• Optical WDM transmitter/receiver module for Gigabit LAN networks on optical fiber 10/100/1000; • Single Mode; • FC/PC range; • 20Km range; • it works only together with NMMC15GBFC20.
OPTICAL WDM Tx + Rx , SINGLE MODE, FC/PC OUTPUT
Optical Multi Mode transmitter/receiver for LAN networks 10/100 on 2 optical fibers. Output connector 2x ST, 2Km range.
RITAR SPA via Maragliano 102/d, 50144 Firenze Italia tel. +39 055322021 fax +39 055332343 email:
[email protected]
optical TX / RX MODULE for LAN networks
Filiali: Buonvicini: via F.D. Buonvicini 12 50100, Firenze italia, tel. +39 055.583770, fax +39 055.583770, email:
[email protected] Prato: via delle Badie 55/57 59100, Prato Italia, tel. +39 0574.584626, fax +39 0574.511007, email:
[email protected]
www.ritar.com
Log. AMT s.r.l.: via Goldoni 46 20090 Trz. sul Naviglio, Milano Italia, tel. +39 02.48409155, fax +39 02.48408674, email:
[email protected]
www.fairmate.it
www.free-wave.eu
www.nextmate.it
