Smartlynx Slx-711 - Smart-e

Transcript

SmartLynx SLX-711 sL Flexible and cost effective CAT* Digital Signage extender and splitters X The Smart-e SLX-711 features • Cost effective Digital Signage extender • Point to point extender • Three & Five output transmitter option ments. Using standard (UTP) unshielded twisted pair • Rack mounting kit available CAT* cabling the units support RGBHV resolutions up • Line level Audio to 1280x1024 (SXGA) with line level audio. • Uses easy to install, inexpensive CAT* • Compact transmitter and receiver units • Secure DC connection • Total cable distance up to 100m • Sync format/polarity preservation • Supports up to 1280x1024 SXGA • Single CAT 5 for video, audio & power • High ground loop immunity • Supplies remote power to receivers • ‘Plug and Play’ connection • Video looping input The SmartLynx SLX-711 is a transmitter and receiver pair designed specifically for Digital Signage require- Extend video and audio over 100m of CAT* twisted pair cable with inline power Wide Bandwidth video and audio signals are extended through the same CAT* cable together with 12V DC inline power up to 100m of cable. Multiple output transmitter units are also available including 3 and 5 Cat* splitters. An active video looping input and high impedance audio loop allow for up to 4 transmitters to be daisy-chained together for larger screen requirements. A 19” rack mounting kit is available for the transmitters providing convenient and neat installation The SLX-711 range from Smart-e provides a flexible and cost effective Digital Signage extender solution *CAT*refers to Category 5, 5e, 6, 7 and 8 structured cabling SLX-TX711 The SLX-TX711 unit is a compact CAT* transmitter designed to distribute a high resolution RGBHV and audio signal to a single remote display up to a CAT* cable distance of 100m from the source. The unit provides an active wide bandwidth video and audio looping input designed to drive a local monitor or allow multiple transmitters to be cascaded together for larger requirements. Continuous DDC connection through the HD15 socket allows for correct EDID communication. Powered from a secure connected compact 12V power supply, the unit is able to remotely power a SLX-RX711 receiver up to 100m of cable. Correct receiver connection is indicated by the yellow LED illuminating. SLX-TX711 front and rear views A 19” rack mounting kit is available to house up to 3 transmitters providing convenient and neat installation. Signal flow indication SLX-RX711 SLX-TX711 Application drawing SLX-RX711 The SLX-RX711 unit is an extremely compact CAT* receiver designed to accept a high resolution RGBHV and audio signal from a CAT* cable up to 100m away. The receiver can compensate for high frequency signal loss providing a high quality video image and hi-fi audio. Comprehensive ESD protection ensures complete reliability even in harsh environments Powered from the CAT* cable, the unit can be discretely hidden behind any display or projector. Correct receiver connection is indicated by the yellow LED illuminating. SCX-TX713 The SLX-TX713 unit is a compact CAT* transmitter designed to distribute a high resolution RGBHV and audio signal to three remote displays up to 100m from the source using standard CAT* cable. The unit provides an active wide bandwidth video and audio looping input designed to drive a local monitor or allow multiple transmitters to be cascaded together for larger requirements. Continuous DDC connection through the HD15 socket allows for correct EDID communication. Powered from a secure connected compact 12V power supply, the unit is able to remotely power all three SLX-RX711 receivers up to 100m of cable. Correct receiver connection is indicated by the yellow LED illuminating. SCX-TX713 front and rear views A 19” rack mounting kit is available to house up to 2 transmitters providing convenient and neat installation. Signal flow indication SCX-TX713 Application drawing SCX-TX715 The SLX-TX715 unit is a compact CAT* transmitter designed to distribute a high resolution RGBHV and audio signal to five remote displays up to 100m from the source using standard CAT* cable. The unit provides an active wide bandwidth video and audio looping input designed to drive a local monitor or allow multiple transmitters to be cascaded together for larger requirements. Continuous DDC connection through the HD15 socket allows for correct EDID communication. Powered from a secure connected compact 12V power supply, the unit is able to remotely power all five SLX-RX711 receivers up to 100m of cable. Correct receiver connection is indicated by the yellow LED illuminating. A 19” rack mounting kit is available to house up to 2 transmitters. SCX-TX715 front and rear views Signal flow indication SCX-TX715 Application drawing Specification - transmitters Bandwidth 400MHz Bandwidth 20kHz Input signal level 1 Volt pk-pk into 75R Signal level 0dB Input impedance 75R Input impedance 10K Ohms Connector HD15 socket Connector 3.5mm jack socket Format RGBHV Format Analogue Dimensions - SLX-TX711 Height 22mm Voltage 12Vdc Width 133mm Connector 3.81mm screw terminal Depth 84mm Max. current 100mA Weight 100g Power 1Watt Dimensions - SCX-TX713 Height 35mm Voltage 12Vdc Width 165mm Connector 3.81mm screw terminal Depth 84mm Max. current 150mA Weight 100g Power 1.5Watt Dimensions - SCX-TX715 Height 35mm Voltage 12Vdc Width 200mm Connector 3.81mm screw terminal Depth 84mm Max. current 200mA Weight 100g Power 2Watt Specification - receiver Bandwidth 400MHz Bandwidth 20kHz Output signal level 1 Volt pk-pk into 75R Signal level 0dB Output impedance 75R Output impedance 100 Ohms Connector HD15 socket Connector 3.5mm jack socket Format RGBHV Format Analogue Dimensions - SLX-RX711 Height 22mm Voltage 12Vdc Width 55mm Connector CAT* Depth 80mm Max. current 100mA Weight 100g Power 1Watt