Transcript
GB/IE
Solar Alarm Clock Functions ! Radio controlled time with manual setting option ! Temperature display from 0°C ~ +50°C ! Alarm with snooze ! Calendar (up to 2069) ! 12 or 24 hour time display ! Day of week language selectable (5 languages) ! solar power A1: Time A2: Radio control signal A3: Day and month display A4: Alarm A5: Temperature A6: Day of week A7: solar cells
Setup Use the ON/OFF switch on the backside of the clock to switch the alarm clock on. After starting the clock it will attempt to receive the radio time signal and the radio tower symbol will appear blinking on the display. During the radio signal reception attempt the clocks buttons will not function. The radio signal reception may take a few minutes to complete. The radio signal reception attempt can be interrupted by pressing and holding - for 3 seconds. The clock will attempt to synchronize with the radio signal every morning at 3:00AM. If the reception attempt is not successful the clock will reattempt synchronization at 4:00AM, 5:00AM and 6:00AM. The synchronization can be manually started by pressing and holden - for 3 seconds. The radio tower symbol # will appear permanently upon successful reception. Manual time setting, day of week language selection and time zone setting Press and hold MODE in normal time mode for 3 seconds to enter time and calendar setting mode. Use - and +(12/24) to set all values and always confirm your settings with MODE. The setting sequence is as follows: hours, minutes, seconds, year, date format day/month or month/day, month, day, time zone and day of week language. Set your time zone to the difference to Central European Time. For example set 0 for Germany or -1 for the UK. 5 languages are selectable for the day of week display: German (GE), French (FR), Italian (IT), Spanish (ES) and English (GB). To reactivate the radio signal reception, press and hold - for 3 seconds. 12/24 hour time mode Press +(12/24) to switch between 12-hour mode (AM/PM) and 24-hour mode. Temperature Press - to select the temperature format Fahrenheit (°F) or Celsius (°C).
1
2
Alarm function Press MODE to enter the alarm function from normal time mode. Hold MODE for 3 seconds to enter alarm time setting mode. Use - and +(12/24) to set the hours and confirm your setting with MODE. Set the minutes in the same way. Press AL ON/OFF to activate or deactivate the alarm. When the alarm is activated the & symbol appears on the display. The snooze function can be activated by pressing SNOOZE when the alarm sounds. Z will appear on the display. The alarm will stop for 5 minutes and then sound again. The snooze function can be used 7 times in succession. Press any button to stop the snooze function.
Important information ! The clock is solar powered and contains a permanently installed rechargeable battery. The battery cannot be removed. To ensure that the display stays clearly readable, the clock should remain in a brightly illuminated room for at least 6 hours daily. ! The rechargeable battery is non-replaceable. ! In case of a malfunction, use the ON/OFF switch to restart the clock. ! It is recommended to leave the clock in bright light for 12 hours before setup. ! After 15 seconds with no key pressed the clock will automatically revert to normal time display. ! The clock will adjust to daylight saving time automatically if the radio time signal reception is sufficient.
Possible sources of interference Possible sources of interference in the household are appliances in which interference has not been eliminated. Television sets and personal computers can also be responsible for interference. It may not be possible to receive the time signal within 2m of a television which is turned on. In the interest of undisturbed reception, your radio controlled clock should not be set up near possible sources of interference. The setting procedure may be delayed in cases of extremely bad reception, caused by heavy building insulation (metal building materials) or atmospheric interference. If the projection clock has not set itself after 10 minutes this can be due to interference. Please repeat the setting procedure at a different location or set the time manually.
Disposal This electrical appliance may not be disposed of with normal household waste. Please hand it in at an appropriate local collection point. Warranty We provide a 5-year warranty for this item. The warranty period starts from the date of sale (receipt, proof of purchase). Within this period we rectify all faults which are attributable to material and manufacturing defects at no cost. For damage which is attributable to improper treatment, e.g. dropping, knocking, or water damage, there is no warranty claim. Free Service Hotline: 00800 5515 6616 www.inter-quartz.de digi-tech ®, Valterweg 27A, D-65817 Eppstein 4-LD1788
3
4
