Soldering

Transcript

SOLDERING HAND SOLDER WIRES, Flux-cored NO CLEAN / LOW RESIDUE FLUX A solder wire using a high purity 60/40 tin/lead alloy employing a reduced level (typically 1%) of non-corrosive, halide-free flux to EN29454. Leaves a negligible residue on the pcb thereby eliminating the need for cleaning. With lower fumes and 'spitting' this solder is ideal for the repair and reworking of production pcb’s. ◆ Ideal for repair/reworking of production pcb’s ◆ No clean, low residue ◆ 60/40 alloy to EN29453 ◆ Non-corrosive, halidefree flux to EN29454 ◆ Choice of wire size ◆ 500g nett reels ◆ Very competitively priced Non-corrosive, halide-free flux to EN29454 (typ. 1%). 500g reels only. Supplied in cartons of 10 reels with additional order codes provided to allow purchase of individual reels. Ideal for repair/reworking of production pcb’s ◆ No clean, low residue ◆ 60/40 or 62/36/2 alloy to EN29453 ◆ Non-corrosive, halidefree flux to EN29454 ◆ Fast soldering on copper and brass ◆ Choice of wire size X39 Non-corrosive, halide-free flux to EN29454 (typ. 1%). 500g reels except 26swg/0.46mm size which is supplied on smaller 250g reels. Label Colour Manf. Part No. red green 42A501D/1 42A501F/1 Order Code Carton (10 Reels) Individual Reel Size* 18 swg/1.2mm 22 swg/0.7mm ◆ 500g REELS 500g REELS Size* Multicore X39 flux-cored solder wire available in 60/40 tin/lead or 62/36/2 tin/lead/silver alloy, specially formulated to complement No Clean wave and reflow soldering processes. The halide-free formulation ensures low fuming/low spitting and leaves a minimal pale residue that does not require removal. 680618 680622 680718 680722 18 swg/1.2mm 22 swg/0.7mm 26 swg/0.46mm Manf. Part No. & Order Code 60/40 Alloy 62/36/2 Alloy 60EN-X39-1.2 60EN-X39-0.7 60EN-X39-0.46 62EN-X39-1.2 62EN-X39-0.7 62EN-X39-0.46 Specification Specification Alloy ........................................................... To EN29453, 60% tin, 40% lead Flux ............................................................ To EN29454, Non-corrosive semi-activated rosin Flux content 1%, Halide-free Surface ins. resistance ............................... >1013Ω Melting temperature .................................. 183°C to 188°C Bit temperature .......................................... 308°C Approx. length per reel .............................. 18 swg – 59m 22 swg – 170m Reel inner core dia. ................................... 20mm Alloy ........................................................... 60EN to EN29453, 60% tin, 40% lead 62EN to EN29453, 62% tin, 36% lead, 2% silver Flux ............................................................ To EN29454, Flux content 1%, Halide-free Melting temperature .................................. 60/40 183°C to 188°C, 62/36/2 179°C Recommended bit temperature ................. 60/40 308°C, 62/36/2 300°C to 350°C * Standard wire gauge shown with nearest simplified metric equivalent diameter HEALTH & SAFETY DATA SHEETS Available upon request for all soldering products 702 01945 47 47 47 www.anglia.com [email protected] 01945 47 48 49 HAND SOLDERING SOLDER WIRES, Flux-cored NO CLEAN / LOW RESIDUE FLUX NO CLEAN / CLEAR RESIDUE FLUX cont. Multicore SMART flux-cored solder wire has been developed as high activity/low residue product especially suitable for surface mount rework applications. The low odour, low flux content formulation leaves a minimal, very pale residue that does not require cleaning. ◆ Ideal for surface mount rework applications ◆ No clean, low residue ◆ 63/37 alloy to EN29453 ◆ Non-corrosive, low halide flux to EN29454 ◆ Fast soldering ◆ Heat stable ◆ Good spread on copper and brass ◆ 26swg/0.5mm wire size ◆ 250g nett reels Multicore Crystal 400 flux-cored 60/40 tin/lead alloy solder wire, specially formulated to complement No Clean wave and reflow soldering processes. The halide-free formulation ensures low fuming/low spitting and leaves a clear residue that does not require removal. Smart Wire ◆ Ideal for repair/reworking of production pcb’s ◆ No clean, clear residue ◆ 60/40 alloy to EN29453 ◆ Non-corrosive, halidefree flux to EN29454 ◆ Fast soldering ◆ Good spread on copper, brass and nickel ◆ Choice of wire size ◆ 500g nett reels Crystal 400 Non-corrosive, low halide flux to EN29454 (typ. 0.7%). 250g reels. Non-corrosive, halide-free flux to EN29454 (typ. 2.2%). 500g reels. 250g REELS 500g REELS Size* Manf. Part No. & Order Code 26 swg/0.5mm 63EN-SMART-0.5 Size* 18 swg/1.2mm 22 swg/0.7mm Manf. Part No. & Order Code D618-400 D622-400 Specification Specification Alloy ........................................................... To EN29453, 63% tin, 37% lead Flux ............................................................ To EN29454, Flux content 0.7%, Halide 0.02% Melting temperature .................................. 183°C Recommended bit temperature ................. 320°C Alloy ........................................................... To EN29453, 60% tin, 40% lead Flux ............................................................ To EN29454, Flux content 2.2%, Halide-free Melting temperature .................................. 183°C to 188°C Recommended bit temperature ................. 340°C * Standard wire gauge shown with nearest simplified metric equivalent diameter HEALTH & SAFETY DATA SHEETS Available upon request for all soldering products Desoldering Braid & Tip Tinner overleaf > > > > 01945 47 47 47 www.anglia.com [email protected] 01945 47 48 49 703