Preview only show first 10 pages with watermark. For full document please download

Solid State Drive - Adlink Technology

   EMBED


Share

Transcript

SSDs Solid State Drive ADLINK SSD Products Features 12 SATA 6 Gb/s interface, backward compatible with SATA 3 Gb/s and 1.5 Gb/s High performance: Up to 480//410 MB/s sustained sequential read/write speed Toshiba 32nm SLC/ 24nm MLC Toggle NAND From 32 GB to 512 GB, capacity in 2.5", 1.8” and mSATA form factor Real Performance – designed for and tested with realistic data sets resulting in consistent performance Clean Sweep Technology – junk data is continuously removed to ensure "clean state" read/write speeds High IOPS – select models feature >60,000 IOPS High reliability for demanding environments; withstands extreme shock and vibration Compatible with most operating systems and platforms Long product life cycle ADLINK industrial grade solid state drives (SSDs) are designed to provide high performance, low power consumption, high reliability and high capacity in 2.5” and 1.8” form factors. Optimized for high-throughput data transfers, ADLINK ASD SSDs are ideal for telecom server, defense, transportation and industrial applications. Built on high speed SLC/MLC NAND flash and advanced controller technology, ADLINK ASD SATA 6 Gb/s SSDs deliver high speed sustained sequential read/write performance of up to 480MB/s and 410MB/s, respectively, at 512 GB capacity. By utilizing single level cell (SLC) NAND technology, the ADLINK SLC line of SSDs provides increased reliability and longer life cycle for mission critical applications. Designed to industrial grade specifications, ADLINK ASD SSDs are available in both commercial (0ºC to +70ºC) and industrial (-40ºC to +85ºC) operating temperature ranges. Strict shock and vibration tests are performed to ensure that ADLINK ASD SSDs meet the needs of the most demanding applications. Target Applications ASD SATA 6 Gb/s SSD Real Clean Sweep Performance High IOPS 24/32nm Toggle NAND Wide Temperature Shock & Vibration Telecom and datacenter servers Military applications Transportation Robotic systems ATM and kiosk SATA Interface Selection Guide Model Form Factor Connector ASD25-SLC ASD26-MLC ASD25-MLC ASD19-SLC ASD19-MLC ASD18-MLC ASDMS-MLC 2.5” 2.5” 2.5” 1.8” enclosure 1.8” enclosure 1.8” enclosure-less mSATA 7+15 pin 7+15 pin 7+15 pin 7+9 pin 7+9 pin 7+9 pin mSATA Interface SATA 6.0Gb/s compatible with SATA 3.0Gb/s and SATA 1.5G/s Flash Memory Capacity SLC 32nm MLC 24nm MLC 32nm SLC 32nm MLC 24nm MLC 32nm MLC 24nm 32/64/128 GB 128/256/512 GB 64/128/256 GB 32/64/128 GB 128/256/512 GB 64/128/256 GB 64/128 GB Controller Marvell 88SS9174 Cache Max. Sustained R/W Performance* IPOS 4K Random MTBF Operating Temp. 128MB DDR3 256MB ~1GB DDR3 128MB DDR3 256MB DDR3 256MB ~512MB DDR3 128MB DDR3 256MB DDR3 Read: 420MB/s Read: 480MB/s Read: 400MB/s Read: 450MB/s Read: 480MB/s Read: up to 400MB/s Read: 480MB/s Write: 380MB/s. Write: 410MB/s. Write: 300MB/s. Write: 400MB/s. Write: 340MB/s. Write: up to 300MB/s. Write: 200MB/s. 17,000/10,000 68,000/63,000 15,000/9,000 68,000/51,000 68,000/45,000 15,000/9,000 68,000/45,000 >2M hours >1.5M hours >1.5M hours >2M hours >1.5M hours >1.5M hours >1.5M hours Commercial: 0°C~ +70°C Commercial: 0°C~ +70°C Commercial: 0°C~ +70°C Commercial: 0°C~ +70°C Commercial: 0°C~ +70°C Commercial: 0°C~ +70°C Commercial: 0°C~ +70°C Industrial: -40°C~ +85 °C Dimensions (W ×L ×H) Weight Page Number Industrial: -40°C~ +85 °C Industrial: -40°C~ +85 °C 69.85 × 100 × 9.5 mm 69.85 × 100 × 9.5 mm 69.85 × 100 × 9.5 mm 54 x 78.5 x 5 mm 54 x 78.5 x 5 mm 53.5 x 77.7 x 3.4 mm 29.9 x 50.8 x 3.4 mm 80g ( max. ) 80g ( max.) 80g ( max.) 36g ( max.) 36g ( max.) 19g ( max.) 10g ( max.) 12-2 12-3 12-3 12-4 12-4 12-5 12-6 *Performance index by ATTO Disk and CrystalDiskMark Benchmark. Speeds listed are for largest capacity of each model. (Actual performance dependent on specific application platform.) 12-1 http://www.adlinktech.com/SSD/ ASD25-SLC Series 2.5” SATA 6 Gb/s SSD with SLC NAND Flash 1 AdvancedTCA Products Features Sustained read up to 420 MB/s Sustained write up to 380 MB/s Capacity: 32, 64, 128 GB SATA 6 Gb/s interface Single-Level Cell NAND Flash for longer life Industrial Temperatures: -40°C~85°C Shock and vibration resistant 2 6U cPCI Blades 3 6U cPCI Platforms 4 3U cPCI Blades Specifications 32 GB: Sustained read/write up to 360/170 MB/s 64 GB: Sustained read/write up to 400/275 MB/s 128 GB: Sustained read/write up to 420/380 MB/s 32 GB: Random 4KB read/write up to 17,000/8,500 IOPS 64 GB: Random 4KB read/write up to 17,500/11,000 IOPS 128 GB: Random 4KB read/write up to 17,000/10,000 IOPS <1.0 sec Environmental Commercial: 0°C to 70°C Industrial: -40°C to 85°C -40°C to 85°C 1,500 G, 0.5 ms Operating: 7~800Hz, 2.17 Grms Non-operating: 7~800Hz, 3.08 Grms UL, CE, RoHS, Microsoft WHQL Description/Configuration ASD25-SLC32G-ET 2.5” SATA 6 Gb/s SSD 32 GB, SLC type, (-40°C~85°C) ASD25-SLC64G-ET 2.5” SATA 6 Gb/s SSD 64 GB, SLC type, (-40°C~85°C) ASD25-SLC128G-ET 2.5” SATA 6 Gb/s SSD 128 GB, SLC type, (-40°C~85°C) ASD25-SLC32G-CT 2.5” SATA 6 Gb/s SSD 32 GB, SLC type , (0°C~70°C) ASD25-SLC64G-CT 2.5” SATA 6 Gb/s SSD 64 GB, SLC type , (0°C~70°C) ASD25-SLC128G-CT 2.5” SATA 6 Gb/s SSD 128 GB, SLC type, (0°C~70°C) Dimensions Units: mm M3 screw holes (4X) (Screw depth into drive=3.0mm Max.) 69.85 ± 0.38 9.4± 0.2 (2X) 9 5V SATA SATA interface power management OS-aware hot plug/removal 15-pin SATA connector for DC 5V input 100 ± 0.38 0.3 (REF) SEE DETAIL A 14 ± 0.2 (2X) 9.365 ± 0.2 (2X) 4.8 (REF) 30.125 ± 0.38 3± 0.2 (4X) 14 ± 0.2 (2X) 9.5 ± 0.2 HDD CENTER DETAIL A SCALE 2/1 10 11 SATA CONNECTOR CENTER 3.5 ± 0.38 Smart Panels Management Connector 8 Ampro by ADLINK Extreme Rugged Power Requirements 7 ComputerOn-Modules SATA Revision 3.0 compliant: compatible with SATA 1.5 Gb/s, 3 Gb/s & 6 Gb/s interface ATA/ATAPI- 8 compliant SSD enhanced SMART ATA feature set Native Command Queuing (NCQ) command set TRIM supported M3 screw holes (4X) (Screw depth into drive=3.5mm Max.) 4.065 ± 0.2 (2X) 61.72± 0.2 (2X) Compatibility SATA 6 Model Number IPC Accessories Operating Temperature Storage Temperature Shock Vibration Certifications Ordering Information Industrial Chassis Bandwidth Read and Write IOPS Power On to Ready > 2,000,000 hours Minimum of 5 years useful life 76.6 ± 0.2 (2X) Performance MTBF Life Cycle Industrial SBCs & MBs 32, 64, 128 GB Single-Level Cell (SLC) NAND SATA 6 Gb/s 2.5” form factor 100 x 68.85 x 9.5mm (L x W x H) 80 g 3U cPCI Platforms Physical Capacity Flash Components Interface Form Factor Dimensions Weight 5 Reliability 12 SSDs 12-2 ASD26-MLC/ ASD25-MLC Series 2.5” SATA 6 Gb/s SSD with MLC NAND Flash Features SSDs Sustained read up to 480 MB/s Sustained write up to 410 MB/s Capacity: 64, 128, 256, 512 GB SATA 6 Gb/s interface Toshiba 24nm/ 32nm MLC Toggle NAND Flash High IOPS (ASD26) Shock and vibration resistant Specifications Power Requirements Physical ASD26: 128, 256, 512 GB ASD25: 64, 128, 256 GB Multi-Level Cell (MLC) NAND SATA 6 Gb/s 2.5” form factor 100 x 68.85 x 9.5mm (L x W x H) 80 g Management Connector ASD26 128 GB: Sustained read/write up to 480/200 MB/s 256 GB: Sustained read/write up to 480/340 MB/s 512 GB: Sustained read/write up to 480/410 MB/s ASD25 64 GB: Sustained read/write up to 350/100 MB/s 128 GB: Sustained read/write up to 400/200 MB/s 256 GB: Sustained read/write up to 400/300 MB/s ASD26 128 GB: Random 4KB read/write up to 68,000/47,000 IOPS 256 GB: Random 4KB read/write up to 68,000/63,000 IOPS 512 GB: Random 4KB read/write up to 51,000/26,000 IOPS ASD25 64 GB: Random 4KB read/write up to 15,000/6,000 IOPS 128 GB: Random 4KB read/write up to 15,000/9,000 IOPS 256 GB: Random 4KB read/write up to 15,000/9,000 IOPS <1.0 sec Ordering Information Performance Bandwidth Read and Write IOPS Power on to ready Reliability MTBF Long Life Support 1,500,000 hours Minimum of 3 years useful life Model Number Description/Configuration ASD26-MLC128G-CT 2.5” SATA 6 Gb/s SSD 128 GB , MLC type, (0°C~70°C) ASD26-MLC256G-CT 2.5” SATA 6 Gb/s SSD 256 GB, MLC type, (0°C ~70°C) ASD26-MLC512G-CT 2.5” SATA 6 Gb/s SSD 512 GB, MLC type, (0°C ~70°C) ASD25-MLC64G-ET 2.5” SATA 6 Gb/s SSD 64 GB, MLC type, (-40°C ~85°C) ASD25-MLC128G-ET 2.5” SATA 6 Gb/s SSD 128 GB, MLC type, (-40°C ~85°C) ASD25-MLC64G-CT 2.5” SATA 6 Gb/s SSD 64 GB, MLC type, (0°C ~70°C) ASD25-MLC128G-CT 2.5” SATA 6 Gb/s SSD 128 GB, MLC type, (0°C ~70°C) ASD25-MLC256G-CT 2.5” SATA 6 Gb/s SSD 256 GB, MLC type, (0°C ~70°C) Dimensions 69.85 ± 0.38 Commercial: 0°C to 70°C Industrial: -40°C to 85°C (ASD25) -40°C to 85°C 1,500 G, 0.5 ms Operating: 7~800 Hz, 2.17 Grms Non-operating: 7~800 Hz, 3.08 Grms UL, CE , RoHS, BSMI, Microsoft WHQL 9.4± 0.2 (2X) SATA Revision 3.0 compliant: compatible with SATA 1.5 Gb/s, 3 Gb/s & 6 Gb/s interface ATA/ATAPI- 8 compliant SSD enhanced SMART ATA feature set Native Command Queuing (NCQ) command set TRIM supported 100 ± 0.38 SEE DETAIL A 9.365 ± 0.2 (2X) 4.8 (REF) 30.125 ± 0.38 3± 0.2 (4X) 14 ± 0.2 (2X) 9.5 ± 0.2 HDD CENTER http://www.adlinktech.com/SSD/ 0.3 (REF) 14 ± 0.2 (2X) 3.5 ± 0.38 12-3 M3 screw holes (4X) (Screw depth into drive=3.5mm Max.) 4.065 ± 0.2 (2X) 61.72± 0.2 (2X) Compatibility SATA Units: mm M3 screw holes (4X) (Screw depth into drive=3.0mm Max.) Environmental Operating Temperature Storage Temperature Shock Vibration Certifications 5V SATA SATA interface power management OS-aware hot plug/removal 15-pin SATA connector for DC 5V input 76.6 ± 0.2 (2X) 12 Capacity Flash Components Interface Form Factor Dimensions Weight SATA CONNECTOR CENTER DETAIL A SCALE 2/1 ASD19-SLC/ MLC Series 1.8” SATA 6 Gb/s SSD with SLC/MLC NAND Flash 1 AdvancedTCA Products Features Sustained read up to 480 MB/s Sustained write up to 400 MB/s Capacity: SLC: 32, 64,128 GB MLC: 128, 256, 512 GB SATA 6 Gb/s interface, Toshiba 24nm MLC/ 32nm SLC Toggle NAND Flash Shock and vibration resistant High IOPS 2 6U cPCI Blades 3 6U cPCI Platforms 4 3U cPCI Blades 5 Specifications SLC: 32*, 64*, 128* GB MLC: 128, 256, 512* GB *Available Q1 2012 Single-Level Cell NAND (ASD19-SLC) Multi-Level Cell NAND (ASD19-MLC) SATA 6 Gb/s 1.8” form factor 78.5 x 54 x 5 mm (L x W x H) 36 g (without case) Reliability MTBF Long Life Support 1,500,000 hours Minimum of 3 years useful life 7 Ordering Information Model Number Description/Configuration ASD19-SLC32G-ET 1.8” Micro SATA 6 Gb/s SSD 32 GB, SLC type, (-40°C~85°C) ASD19-SLC64G-ET 1.8” Micro SATA 6 Gb/s SSD 64 GB, SLC type, (-40°C~85°C) ASD19-SLC128G-ET 1.8” Micro SATA 6 Gb/s SSD 128 GB, SLC type, (-40°C~85°C) ASD19-SLC32G-CT 1.8” Micro SATA 6 Gb/s SSD 32 GB, SLC type, (0°C~70°C) ASD19-SLC64G-CT 1.8” Micro SATA 6 Gb/s SSD 64 GB, SLC type, (0°C~70°C) ASD19-SLC128G-CT 1.8” Micro SATA 6 Gb/s SSD 128 GB, SLC type, (0°C~70°C) ASD19-MLC128G-CT 1.8” Micro SATA 6 Gb/s SSD 128 GB, MLC type, (0°C~70°C) ASD19-MLC256G-CT 1.8” Micro SATA 6 Gb/s SSD 256 GB, MLC type, (0°C~70°C) ASD19-MLC512G-CT 1.8” Micro SATA 6 Gb/s SSD 512 GB, MLC type, (0°C~70°C) Dimensions Environmental Commercial: 0°C to 70°C Industrial: -40°C to 85°C (SLC only) -40°C to 85°C 1,500 G, 0.5 ms Operating: 7~800 Hz, 2.17 Grms Non-operating: 7~800 Hz, 3.08 Grms UL, CE , RoHS Units: mm SATA Revision 3.0 compliant: compatible with SATA 1.5 Gb/s, 3 Gb/s & 6 Gb/s interface ATA/ATAPI- 8 compliant SSD enhanced SMART ATA feature set Native Command Queuing (NCQ) command set TRIM supported Smart Panels 10 11 Compatibility SATA 9 Ampro by ADLINK Extreme Rugged Operating Temperature Storage Temperature Shock Vibration Certifications 8 ComputerOn-Modules SLC 128 GB: Sustained read/write up to 450/400 MB/s MLC 128 GB: Sustained read/write up to 480/170 MB/s 256 GB: Sustained read/write up to 480/340 MB/s SLC 128 GB: Random 4KB read/write up to 68,000/51,000 IOPS MLC 128 GB: Random 4KB read/write up to 68,000/45,000 IOPS 256 GB: Random 4KB read/write up to 44,000/20,000 IOPS <1.0 sec 6 IPC Accessories Bandwidth Read and Write IOPS Power on to ready 3.3V micro SATA SATA interface power management OS-aware hot plug/removal 9-pin SATA connector for DC 3.3V input Industrial Chassis Performance Management Connector Industrial SBCs & MBs Capacity Flash Components Interface Form Factor Dimensions Weight 3U cPCI Platforms Power Requirements Physical 12 SSDs 12-4 ASD18-MLC Series 1.8” SATA 6 Gb/s SSD with MLC NAND Flash Features SSDs Sustained read up to 400 MB/s Sustained write up to 300 MB/s Capacity: 64, 128, 256 GB SATA 6 Gb/s interface Multi-Level Cell NAND Flash with Toggle Mode Technology Shock and vibration resistant Specifications Power Requirements Physical 12 Capacity Flash Components Interface Form Factor Dimensions Weight 64, 128, 256 GB Multi-Level Cell (MLC) NAND SATA 6 Gb/s 1.8” form factor 77.7 x 53.5 x 3.4 mm (L x W x H) 19 g (without case) 64 GB: Sustained read/write up to 350/95 MB/s 128 GB: Sustained read/write up to 370/185 MB/s 256 GB: Sustained read/write up to 400/300 MB/s 64 GB: Random 4KB read/write up to 15,000/6,000 IOPS 128 GB: Random 4KB read/write up to 15,000/9,000 IOPS 256 GB: Random 4KB read/write up to 15,000/9,000 IOPS <1.0 sec Environmental Operating Temperature Storage Temperature Shock Vibration Certifications 3.3V micro SATA SATA interface power management OS-aware hot plug/removal 9-pin SATA connector for DC 3.3V input Reliability MTBF Long Life Support Performance Bandwidth Read and Write IOPS Power On to Ready Management Connector 0°C to 70°C -40°C to 85°C 1,500 G, 0.5 ms Operating: 7~800 Hz, 2.17 Grms Non-operating: 7~800 Hz, 3.08 Grms UL, CE, RoHS, Microsoft WHQL > 1,500,000 hours Minimum of 3 years useful life Ordering Information Model Number Description/Configuration ASD18-MLC64G-CT 1.8” Micro SATA 6 Gb/s SSD 64 GB, MLC type, (0°C~70°C) ASD18-MLC128G-CT 1.8” Micro SATA 6 Gb/s SSD 128 GB, MLC type, (0°C~70°C) ASD18-MLC256G-CT 1.8” Micro SATA 6 Gb/s SSD 256 GB, MLC type, (0°C~70°C) Dimensions Units: mm 3.4 Component Area(BOTTOM) H=1.4mm MAX 1.4 Compatibility SATA SATA Revision 3.0 compliant: compatible with SATA 1.5 Gb/s, 3 Gb/s & 6 Gb/s interface ATA/ATAPI- 8 compliant SSD enhanced SMART ATA feature set Native Command Queuing (NCQ) command set TRIM supported 0.96 Controller 77.7 DRAM 1.4 1.4 ± 0.3 0.6 Board thickness 53.5 4 12-5 http://www.adlinktech.com/SSD/ ASDMS-MLC Series mSATA SATA 6 Gb/s SSD with MLC NAND Flash 1 AdvancedTCA Products Features Sustained read up to 400 MB/s Sustained write up to 200 MB/s Capacity: 64, 128GB SATA 6 Gb/s interface, Toshiba 24nm MLC Toggle NAND Flash Shock and vibration resistant High IOPS 2 6U cPCI Blades 3 6U cPCI Platforms 4 3U cPCI Blades 5 Specifications Performance 64 GB: Sustained read/write up to 380/100 MB/s 128 GB: Sustained read/write up to 400/200 MB/s 64 GB: Random 4KB read/write up to 60,000/23,000 IOPS 128 GB: Random 4KB read/write up to 68,000/45,000 IOPS <1.0 sec Environmental Commercial: 0°C to 70°C -40°C to 85°C 1,500G/0.5msec Operation: 7~800Hz, 2.17G (RMS) Non-operation: 7~800Hz, 3.08G (RMS) UL, CE , RoHS, Microsoft WHQL MTBF Life Cycle Description/Configuration ASDMS-MLC64G-CT mSATA SATA 6 Gb/s SSD 64 GB, MLC type, ( 0°C~+70°C) ASDMS-MLC128G-CT mSATA SATA 6 Gb/s SSD 128 GB, MLC type, ( 0°C~+70°C) 8 Dimensions Units: mm 2.83 29.85 24.2 5.8(2X) Component Area(Bottom) H=1.35mm MAX Component Area(Top) H=2.4mm MAX 5.8(2X) 9 Flash Flash 5.8(2X) Flash 50.8 48.05 Flsh Controller 10 3.2 5.1 Dram 0.5(2X) R0 .8 1 board thickness 0.5(2X) Ampro by ADLINK Extreme Rugged SATA Revision 3.0 compliant: compatible with SATA 1.5 Gb/s, 3 Gb/s & 6 Gb/s interface ATA/ATAPI- 8 compliant SSD enhanced SMART ATA feature set Native Command Queuing (NCQ) command set TRIM supported 7 Model Number ComputerOn-Modules 1,500,000 hours Minimum of 3 years of useful life Ordering Information Compatibility SATA 6 Reliability IPC Accessories Operating Temperature Storage Temperature Shock Vibration Certifications 3.3V mSATA SATA interface power management OS-aware hot plug/removal Industrial Chassis Bandwidth Read and Write IOPS Power on to ready Management 5.8(2X) 64, 128 GB Multi-Level Cell (MLC) NAND SATA 6Gb/s mSATA (MO-300) form factor 50.8 (L) x 29.8 (W) x 3.40 mm (H) 10 g ( Max.) Industrial SBCs & MBs Capacity Flash Components Interface Form Factor Dimensions Weight 3U cPCI Platforms Power Requirements Physical 11 Smart Panels 12 SSDs 12-6