Preview only show first 10 pages with watermark. For full document please download

Solinst Aquavent Hardware Compatibility Solinst Aquavent

   EMBED


Share

Transcript

AquaVent™: Hardware Compatibility Recommended Firmware & Hardware Configurations Software & Firmware Solinst always recommends using the latest software and firmware release. Current releases can be downloaded at any time, free of charge, from the Solinst web site at: http://www.solinst.com/downloads/. Always use the latest Levelogger® PC Software version to install the latest Firmware versions. Operating System Requirements Levelogger PC Software Versions 4.2 and up are compatible with Windows 7, 8, and 10. Note: Solinst always recommends that our customers download the data from their AquaVent loggers, using the same Levelogger Software version they were originally programmed with. Get Quote | More Info Levelogger PC Software Firmware Solinst Levelogger App DataGrabber™ Firmware (Coming July 2016) 3.0.0 iOS 8, or later 1.001 1.000 AquaVent Logger 4.2.0 (Includes Firmware Upgrade Utility 1.2.7) (Coming July 2016) 1.1.0 Android 4.4 or higher 1.000 SP & SPX Wellhead Note: The firmware version of a DataGrabber can be found on a label on the inside of the battery compartment. DataGrabber firmware can not be upgraded by the user, it can only be upgraded by Solinst. Note: If both the Logger and Wellhead Firware need to be updated, upgrade the Wellhead firmware first. AquaVent Accessories Wellhead Communication Cables, including USB Connector Cables, SD1-12 Connetor Cables, and MODBUS RS232/RS485 Connector Cables, as well as Vented Cables are compatible with all versions of the AquaVent logger and applicable Communication Wellheads. Vented Cable USB Connector Cable for use with SP or SPX Wellheads Connector Cable to connect to an App Interface or DataGrabber for SP or SPX Wellheads **Made for: iPhone 5, iPad (4th generation), iPad mini, iPod touch (5th generation) “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. ® Apple, the Apple logo, iPhone, iPad, iPod touch, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. iPad mini is a trademark of Apple Inc. App Store is a service mark of Apple Inc. **Levelogger App Interface iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Other trademarks and trade names are those of their respective owners. Levelogger App Interface for Android. Android and Goolge Play are trademarks of Google Inc. Tested on the following devices: Tablet: Samsung Tab 4 (10.1”) - Model SM-T530NU Phone: Samsung Galaxy S4 - Model SGH-1337M ®Solinst and Levelogger are registered trademarks of Solinst Canada Ltd. Printed in Canada June 20, 2016 SDI-12 and MODBUS RS232/ RS485 Connector Cables for Use with SPX Wellheads ™AquaVent and DataGrabber are trademarks of Solinst Canada Ltd. For further information contact: Solinst Canada Ltd. Fax: +1 (905) 873-1992; (800) 516-9081 Tel: +1 (905) 873-2255; (800) 661-2023 35 Todd Road, Georgetown, Ontario Canada L7G 4R8 Web Site: www.solinst.com E-mail: [email protected]