Solis Price And Specification Guide

Transcript

SOLIS Effective January 1, 2011 Price and Specification Guide HEALTHCARE SOLUTIONS TABLE OF CONTENTS GENERAL INFORMATION 1 LEED Credit Summary 2 General Information 4 Wood Finishes 4 Greenguard 4 Mesh Specifications 5 Krug In-Stock Fabric & Leather Program 6 C.O.M./C.O.L. 8 Maharam 9 Momentum 10 CF Stinson 11 Laminates, Mesh Colors & Frame Colors 12 KrugExpress SOLIS SPECIFICATIONS 12 Solis Product Features 14 Solis Guest & Bariatric 16 Solis Patient 18 Solis Easy Access 19 Solis Guest Multiple Seating Dimensions & C.O.M. Requirements 21 Solis Guest Pre-Configured Multiple Seating 22 Solis Guest Start, Center, End Unit Multiple Seating 24 Solis Guest Free Span Multiple Seating 26 Solis Patient Multiple Seating Dimensions & C.O.M. Requirements 28 Solis Patient Pre-Configured Multiple Seating 29 Solis Patient Start, Center, End Unit Multiple Seating 31 Solis Patient Free Span Multiple Seating 33 Solis Linking Tables 35 Solis Free Standing Tables 36 Accessories - Adjustable Headrest, Backrest Cover & Ottoman LEED CREDIT SUMMARY SOLIS GUEST SOLIS PATIENT MATERIAL CONTENT: SOLIS TABLE MATERIAL CONTENT: MATERIAL CONTENT: 2% Steel Seat Springs 2% Steel Seat Springs 3% Plywood 3% Plywood 6% Fabric 6% Fabric 9% Cardboard 9% Cardboard 16% Urethane Foam 15% Urethane Foam 63% Steel 2% Hardwood Veneer 8% Hardwood 10% Cardboard 38% Steel 65% Steel 42% Particle Board PRE-CONSUMER RECYCLED CONTENT = 16% PRE-CONSUMER RECYCLED CONTENT = 17% PRE-CONSUMER RECYCLED CONTENT = 17% POST-CONSUMER RECYCLED CONTENT = 22% POST-CONSUMER RECYCLED CONTENT = 22% POST-CONSUMER RECYCLED CONTENT = 22% CREDIT CREDIT CREDIT CREDIT CREDIT CREDIT CREDIT 2.1 - 2.2 3.3 4.1 4.2 4.5 5.1 7 Construction Waste Management Resource Reuse Recycled Content Recycled Content Low Emitting Materials, (PLEASE ENQUIRE) Composite Wood & Laminate Adhesives Regional Materials* Certified Wood (PLEASE ENQUIRE) CONTRIBUTES TO 1-2 point(s) 1 point 1 point 1 point 1 point 1 point 1 point * This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Toronto, Ontario. The above information regarding LEED contribution applies to both the upholstered as well as mesh back versions. 1 | SOLIS GENERAL INFORMATION Terms and Conditions Net 30 days on approved credit. A late payment charge of 1% per month will be applied on overdue invoices. This charge will be pro-rated to the number of days past 30 days that the invoice is overdue. All applicable sales taxes are extra. Distribution of this price list does not in itself constitute an offer to sell. Orders can be received only from authorized Krug dealers. Acceptance of any order and terms of sale may be established at the discretion of Krug. Deposits are required on orders received from new accounts as well as on large or special orders. Krug reserves the right to discontinue designs, or to change designs, construction, prices, or materials without notice. Customer Service Hours Please note customer service hours are: 8:30 am to 5:00 pm est 1.888.578.KRUG 1.519.748.5177 fax Order Acknowledgements Each order will be acknowledged via e-mail or fax. This acknowledgement is the final agreement between Krug and the customer, superseding all previous communications regarding the purchase order. Where there is a discrepancy on a purchase order between a product code and a description, Krug will make every effort to resolve the discrepancy, but will be ruled by the product code ordered. Please check all acknowledgements for accuracy, and advise Krug of any discrepancies with a purchase order. Cancellation A cancellation can be made only by expressed agreement with Krug. A cancellation fee may be incurred for restocking. Dimensions Dimensions are in inches and approximate, and subject to change without notice. Contact Customer Service if dimensions are critical. Blanket Wrapping Krug will blanket wrap larger seating orders at customer’s request. Please indicate on your purchase order and contact Customer Service. Storage Charges Krug reserves the right to assess a nominal storage charge if a customer does not accept shipment of an order within a week of the ship date. Contact Information Phone: 1.888.578.KRUG Fax: 1.519.748.5177 Purchase Order Fax: 1.888.236.4783 Web: www.krug.ca E-mail: [email protected] Installation Support For assistance please contact Customer Service at 1-888-578-5784 or e-mail [email protected] and you will be directed to the appropriate installation support person. Pricing Krug endeavors to ensure that all prices in this price list accurately reflect our current prices. However, errors do occur and will be rectified through notices to the field. Krug reserves the right to acknowledge pricing that may be different from the price list. Warranty Krug warrants Solis products to be free from defects in materials and workmanship for the lifetime of their use. This warranty is applicable to products in use by their original purchaser. This warranty does not apply to components and materials not manufactured by Krug: these are subject to the specific warranties of their manufacturers (if any). Repairs or replacement of any defect covered under this warranty by Krug will be made, at our option and method, at no charge to the original purchaser. Krug’s judgement is final and binding with respect to the nature or cause of defects or damage, and the necessity or manner or repair or replacement. This warranty does not apply to defects or damage resulting from: •normal wear and tear occurring with the use of the product •negligence, misuse, excessive use, alteration, improper cleaning or repair •substitution or use of incorrect or unauthorized components or material •handling or installation that is incorrect, or that causes damage or defect •damage incurred by a freight carrier other than Krug •wearing of finishes and fabrics, and normal variations in materials (including dye lot variations) •properties of natural materials, including wood and leather •exposure to environments with uncontrolled temperature and humidity (products must be transported, stored and used in climate-controlled conditions) •mesh materials may wear or be damaged with use, and fraying, cuts, marring or any other damage caused by normal or excessive use are not a defect of the material. Export Packaging Krug is pleased to provide the option for export packaging on all our products, to provide additional protection from damage. Export packaging is provided at an upcharge of 5% of the net selling price per item. Export Packaging is STRONGLY RECOMMENDED for: (A) all shipments outside of the lower 48 states and Canada (B) all shipments that will be held in storage for an extended period prior to installation. Important: Please note that Krug will not be responsible for damage claims on product shipped or stored in the above conditions but where export packaging has not been utilized. Freight Terms and Conditions 1. All product is shipped FOB the Krug factory. Freight is either pre-paid to the destination (dealer’s dock or territorial warehouse) or not pre-paid, depending on established customer specific freight terms. 2. Docks at the selected delivery location must be equipped to handle a 53’ trailer. If dock is inadequate for delivery by Krug, Krug will re-deliver to another location and any additional costs will be charged to the customer. 3. When a Krug territorial warehouse (where available) is selected as the default delivery location, Krug pays freight cost to the territorial warehouse only, and no further. The Customer is responsible for all charges from this point. 4. For all deliveries, it is understood that Krug or its agent is making a dock delivery only (equipped to handle a 53’ trailer), and any further work of truck unloading, delivery beyond the dock, installation, and removal of packaging is not authorized or paid for by Krug. 5. Drop shipments to the installation site, and timed deliveries, are available on larger shipments (full truckloads or slightly less) at no additional charge. Drop shipments or timed deliveries for smaller shipments may not be available, or if available will require a surcharge. Deliveries on an after hours basis, or on weekends, or any other special requirements, may be subject to a surcharge. Location and contact information, and the requested time of delivery, is required at least one week prior to the acknowledged shipment date. If this information is not provided one week in advance, or if the location or time of the drop shipment is changed less than one week in advance, a surcharge may be applied, and/or the drop shipment may not be scheduled. For deliveries requested Monday to Thursday after 5:00 pm, please apply a surcharge of $250/shipment. For deliveries requested Monday to Friday before 7:00 am, please apply a surcharge of $250/shipment. For deliveries requested Friday (after 3:00 pm) or weekends, please apply a surcharge of $500/shipment. (local times) 6. For all deliveries - whether to the Customer location or drop shipment - any circumstances that result in the delay of our carrier (including unsuitable receiving facilities, or facilities not open or available), service charges will be applied at the rate of $75/hour. Where re-delivery is necessary because of these circumstances, the full cost of re-delivery will be charged. If Less Than Truck Load is delivering, one hour is allocated to unload. Any additional time required to unload after the first hour is $75/hour. If a Truck Load is delivering the order, three hours is allocated to unload. Any additional time required to unload is $75/hour. Direct deliveries to site for net orders are possible, (must exceed $60,000 net), and accommodate 48 - 53’ trailers. Krug is responsible for delivery to the approved delivery address. If an address change is required, this must be authorized by Krug 5 business days prior to ship date. Any additional delivery costs incurred after this time will be charged to the customer. Please contact Customer Service for specifications or any other assistance regarding export packaging. SOLIS | 2 GENERAL INFORMATION Product Strength and Durability Testing All Solis products have been thoroughly tested, and exceed the testing requirements of ANSI / BIFMA X5.1 - 2002. Solis seating has been tested to significantly greater standards for strength. Weight capacities are as follows: Guest & Patient Chairs (21” & 24”) - 350 lbs Bariatric Chairs (30” & 44”) - 750 lbs Multiple Seating & Pre-configured - 350 lbs per seat 2-Seat Free Span - 525 lbs per unit 3-Seat Free Span = 750 lbs per unit Solis Bariatric seating has been tested to significantly greater standards for strength. It has been tested to, and exceeds a 450 lb. proof load test on the back, and a 750 lb. drop test on the seat. Specific test results and documentation are available on request. Customer Satisfaction It is the primary goal of Krug and our staff to ensure the complete satisfaction of our customers with our products and performance. If a problem arises with a Krug product after the expiration of the limited warranty period, Krug will exercise its best efforts to achieve the satisfaction of the customer in a manner that is fair to all concerned. Damaged Shipments All Krug product is well engineered, carefully inspected, and expertly loaded onto our trucks at our Distribution Center. If you receive any damaged freight, we ask that you do not refuse the shipment. Krug is not responsible for damage to goods that occurs in transit or storage. It is the purchaser and/or receiver’s responsibility to examine the goods upon receipt and to notify Krug of any damages, overages or shortages. Any discrepancies should be noted on the Bill of Lading. The delivering carrier will not accept responsibility for shortages or damages if signed ‘‘clear’’. Notification of concealed damage claims must be made to Krug Distribution within 5 days of delivery, along with digital pictures if available. All product and packaging must be available for inspection. Krug liability ceases after 5 business days and Krug will not be responsible for concealed damages if shipments are left unopened. Krug is not responsible for the condition of product that is stored or installed in an environment where temperature and humidity are not controlled. Field Product Report Authorization Krug's written authorization, in the form of an FPR number, must be obtained prior to incurring charges of any kind if Krug is expected to pay these charges. This includes authorization for field repairs and replacements, installation and delivery charges. Krug reserves the right to have its representative inspect product related to any request for such authorizations, prior to that authorization being provided. Deductions from invoices paid for any charges to Krug, without prior written authorization in the form of an FPR, will not be accepted. Digital photographs may be required to complete the FPR process. 3 | SOLIS Returns No merchandise may be returned without Krug’s prior written consent. In the event of an authorized return, a Field Product Report (FPR) number will be issued, and a restocking charge will apply. Return transportation charges must be prepaid. Unauthorized returns will not be accepted and will be returned freight collect. All merchandise being returned must be properly packaged in its original or comparable replacement packaging to ensure protection of the product during handling and transportation. Returns on orders duplicated by the customer must be received in their original packaging to be accepted. Product being returned where Krug has authorized its liability for replacement or repair will be thoroughly inspected on its return, and the results compared to the reason for the return stated on the FPR. Any discrepancies, such as additional damage, signs of usage, missing parts, etc., will result in an adjustment to the amount of credit issued. Custom Capabilities Over 15% of our orders involve some type of custom work, and we invite our customers to make use of our extensive capabilities. These include: 1) Dimensional customization of standard size products 2) Custom finishes 3) For larger orders, completely customdesigned products, as well as non-standard wood species can be specified. Custom orders may require additional production lead times. Contact Engineering at the e-mail address [email protected] for pricing of custom products. Care and Maintenance Wood Finishes Although Krug’s extensive finishing process ensures a durable finish on all our products, there are several steps that can be taken to protect and prolong the life and beauty of the finish. Dust only with a clean, dry cloth, going with the grain. Clean any marks with a damp cloth, using a small quantity of mild soap or detergent. Do not use any wax-based polish, spray or silicone. Eventually, a film will build up and discolor the top. Do not place your furniture in a position of permanent exposure to direct sunlight. Leather Leather is a natural product and requires very little care during use. Most stains can be removed with a clean dry cloth. For stubborn spots and stains, use a mild non-detergent cleaner, rinse well and let air dry naturally. Do not use saddle soap, cleaning solvents, furniture polish, oils, varnish, abrasive cleaners, soaps or ammonia waters. Fabric Upholstery Professional upholstery cleaning is recommended. Mesh Backs Mesh backs can be cleaned with warm water and mild soap. Other “soft household cleaners” such as Windex, have very good cleaning results. Water diluted to a maximum of 25% bleach and other intensive cleaning solutions (Virucide, accelerated peroxide) such as PerCept RTU and Virox can be used without affecting the color or integrity of the mesh. All cleaning products should be applied with a cloth, sponge or soft bristle brush. WOOD FINISHES Wood Finishes Natural Characteristics of Wood Wood Finishes for Seating & Occasional Tables Wood is a natural product with inherent color variations that will never be fully mitigated by the finishing process. Please anticipate variation in colors within a single unit, from piece to piece, and from Krug wood finish samples. If a very close match is required, a sample must be provided with the order and an upcharge will apply. Exact color matches are not possible. Standard wood finishes are: Finishes on Beech Appalachian Cherry American Cherry Imperial Cherry Light Cherry Medium Cherry Natural Cherry Sable Cherry Standard Cherry Light Oak Harvest Oak Mahogany Mellow Oak Espresso Cordovan Walnut Natural Walnut Regular Walnut Dark Walnut Clear Beech Medium Anigre Finishes on Maple Clear Maple Honey Maple Wheat Maple Custom Wood Finishes Add 10% list to your order for special finishes on Solis tables. Custom wood finishes are available on Solis wood arm caps and wood side rails. The upcharge for custom finishes is $25 list per wood arm or $25 list per wood side rail. A minimum upcharge is $500 list per finish per order. (For example, on all orders up to $5000 list an upcharge of $500 will apply, on orders $5000 and up add 10% list to order.) Special finish upcharges on seating products are calculated on a grade 1 value. For orders with special finishes, a sample that is a minimum 3” by 3” must be received with the order. Special finishes may add additional lead time to production schedules. Since wood is a natural product, some variations in grain, color and stain acceptance will occur. In our finishing processes, we try to minimize variations, but some variation between samples and finished goods should be anticipated. Dual Finishes Add 10% list per item if specifying dual finish. Standard Wood Finishes No upcharge will be applied when specifying a finish available as standard on one species onto maple seating and occasional tables. Clear finishes are not available on other species since they are a clear finish on top of the natural veneer color. GREENGUARD Many Krug products have earned the GREENGUARD™ Environmental Institute’s GREENGUARD™ Certification for low emitting interior products. All GREENGUARD™ Certified products and materials are tested regularly to ensure continued low emitting status. Specifying and design professionals can trust GREENGUARD™ Certified products to create superior interior environments with out added cost or effort. All GREENGUARD™ Certified products can easily be found online in the GREENGUARD™ Product Guide. A printable certificate is available for each product in the guide to simplify project submission and product verification. For more information or to obtain an up-to-date listing of Krug’s GREENGUARD™ Indoor Air Quality Certified® products please visit www.krug.ca or www.greenguard.org. All Solis products have received GREENGUARD™ certification. Mesh Krug’s Mesh backs covers are produced with Polyester yarns that are 100% recyclable. The yarn dying process is a closed loop system that recycles and recaptures 100% of the energy from the heating systems needed. All dyes contain no heavy metals, carcinogens or allergens. Mesh Specifications & Performance ASTM D4157 Abrasion Resistance (Oscillatory Cylinder) 30,000 Rubs ASTM D5034 Breaking Strength N 2167 Warp 1916 Weft Flammability CAL177 AATCC TM8: Colorfastness to Crooking Dry Class 5 Wet Class 5 ASTM D3511: Brush Pilling Rating 5 ASTM D6797: Ball Burst N 2486 SOLIS | 4 FABRIC | LEATHER In-Stock Fabric Program Krug Grade 1, 2 and 3 fabrics are also available on a cut yardage basis. Pricing is shown below. All prices are net, FOB factory. Grade 1 - $30/yard net Passport 20217 Motion 50020 Sequence 50516 Solo 50529 Safari 101 Maize 201 Mystic 801 Willow 504 Ruby 302 Eclipse 402 Asphalt 901 Clay 105 Straw 104 Stone 801 Cactus 507 Garnet 308 Midnight 401 Gunmetal 806 Sand 802 Nutmeg 203 Onyx 901 Moss 502 Cardinal 301 Lapis 401 Chestnut 701 Jute 101 Taupe 107 Slate 801 Fennel 503 Paprika 308 Gulf 401 Ink 903 Manhattan 09513 Linia 50169 Freestyle 50615 Matrix 04126 Wisp 8012 Spice 8000 Sable 8007 Olive 8005 Pimento 8002 Pacific 8006 Obsidian 8010 Tan 106 Wheat 207 Smoke 806 Wintermoss 504 Beaujolais 308 Ocean 407 Carbon 905 Fawn 101 Honey 201 Pewter 801 Sage 501 Crimson 301 Twilight 401 Raven 901 Steel 021 Bronze 040 Graphite 011 Custard 022 Pumpkin 050 Cobalt 012 Jet 015 Ellipse 08707 Luxura 20339 Transit 50302 Mirage 02386 Flax 102 Ginger 203 Chocolate 702 Lime 501 Chili 304 Navy 403 Platinum 801 Malt 102 Camel 201 Espresso 703 Pistachio 502 Claret 301 Atlantic 403 Cinder 901 Birch 103 Buff 102 Cocoa 702 Mint 512 Blaze 305 Azure 405 Shadow 804 Mist 2196 Storm 2197 Coffee 2198 Forest 2191 Flare 2188 Thistle 2194 Ebony 2199 Grade 2 - $41/yard net Grade 3 - $51/yard net Flammability Standards for Krug In-Stock Fabric Program • Passes State of California Technical Bulletin 117-Section E In-Stock Leather Program Grade 8 Espresso Sand Stone Graphite K13.8000 K13.5000 K13.3000 K13.4000 Port K13.2000 Cobalt K13.7000 Cypress K13.6000 Onyx K13.1000 Please contact Customer Service for specific information on leathers, and lead times. 5 | SOLIS CUSTOMER’S OWN MATERIAL - C.O.M./C.O.L. Customer’s Own Material (COM/COL) COM/COL must be received three weeks prior to the acknowledged ship date. Orders with COM/COL not received by the required deadline will be delayed. A description of the upholstery cover, including supplier name, pattern name, upholstery cover name and color number must be included with the purchase order. COM/COL testing requires 3 business days and samples are to be directed to Customer Service. The customer has the option of providing the sample COM/COL before, at time of order, or once the sample COM/COL is received. If the customer does not send a sample for approval in advance of sending actual material, Krug will not be responsible for the cost of any upholstery cover or other material that it determines to be unsuitable for the product or our process. When the COM/COL upholstery cover is received at Krug, it must be clearly identified with the upholstery cover name and color, and tagged with name of the Krug customer and purchase order number. Krug will inspect all COM/COL upholstery covers when received to determine if it will be suitable for upholstery. Where Krug feels that the upholstery cover or leather specified will compromise the quality or integrity of our products, customers will be contacted to direct these concerns. Further, Krug reserves the right to refuse to accept and use any COM upholstery covers or leathers that will compromise our products in any way that is unacceptable to Krug. Krug cannot assume responsibility for the durability or tailoring quality of customer’s own material. Yardage specified in this price guide is approximate. In the case of multiple product orders, multiply the number of items by the COM yardage specified to determine upholstery cover required, unless otherwise indicated. Additional yardage may be needed if the material is less than 54” wide, or patterned or striped and requires matching. All COMs are cut “up the roll” unless otherwise stated by the customer. All striped upholstery covers will be applied vertically unless otherwise stated by the customer and after approval by Krug. Krug will not be responsible for directional or positional problems with its application of COM material, unless it has been provided with explicit instructions by the customer. Special instructions should be sent to Krug Customer Service, including a sample (or photocopy) of the upholstery cover. Krug is not responsible for instructions sent with the upholstery cover rolls, or for the method of upholstery if no instructions have been provided. Price increases and freight charges for COM/COL acquired on the customer’s behalf will be passed onto the customer. Application of Directional Upholstery cover Some COM upholstery covers will be considered directional by Krug even though they are not considered directional by the supplier. All COMs are automatically cut “up the roll” unless otherwise stated by the customer (please see below). Standard-Cut “up the roll” Non-Standard-Cut across the roll “railroad” COM/COL Shipping Procedures For seating COM/COL upholstery covers, please send upholstery covers to: Krug Inc. 111 Ahrens Street Kitchener, Ontario Canada N2H 4C2 Attention: RECEIVER COM/COL orders cannot be scheduled into production until the upholstery cover has arrived and inspection is complete. All packages must be clearly marked ‘‘For Customs Clearance by Russell A. Farrow Custom Brokers’’. According to the North American Free Trade Agreement (NAFTA), goods shipped between the United States and Canada can qualify for exemption from all duties, or for a reduction in duties, if the goods can be proven to originate in either the United States, Canada or Mexico. CAL133 & Moisture Barrier California Technical Bulletin 133 is a flammability test for seating. Krug offers a compliance method, in combination with non-flammable upholstery covers, may enable products to meet certification requirements for this test. This process at the same time also provides the products with a Moisture Barrier - a treatment that helps to prevent the passage of liquids and moisture to inside of the uphostered components - thereby conferring sanitary and anti-infection benefits. So when CAL 133 is specified, the product also automatically has a Moisture Barrier, and when a Moisture Barrier is specified, the product also features the compliance method and low flammability features of CAL 133. The application of this up-charge and the compliance method does not mean that the specific configuration of product and upholstery cover are tested and officially certified as being CAL133 compliant. If the official certification is required, Krug will provide this (through an independent certified testing laboratory) at a charge of $700 per item, plus the cost of the product to be tested. Lead time for certification testing is typically 4-8 weeks. Krug assumes no responsibility for the testing of our products in combination with upholstery covers, or for the results of any testing conducted. Some specific configurations of products and upholstery have already been tested. Please contact Customer Service for additional information. C.O.L. Yardage To calculate C.O.L. yardage required, please use the following conversions based on COM yardage: Leather must be ordered in square footage. - 17 square feet in a yard Approx. 3 yards in a hide Approx. 51 square feet in a hide Please use grade 3 pricing for COL Canada Customs requires that a NAFTA Certificate of Origin and a Commercial Invoice be completed and sent with the upholstery cover shipment. The Commercial Invoice must clearly state the description of the upholstery cover, the selling price, the make-up or content, and the purchaser. The absence of these two documents will delay the shipments at the U.S./Canada border, thereby potentially delaying the customer order. If the total value of the shipment is less than $1200 U.S., Customs will accept a Low Value Statement of Origin in place of the NAFTA Certificate of Origin. The Low Value Statement must be signed by a representative of the exporting company. This statement may either be included on the commercial invoice or attached to the invoice. Krug is happy to answer any questions or concerns about COM/COL shipping procedures and the required documents. Please contact our Customs Specialist at 1.888.578.5784. SOLIS | 6 CUSTOMER’S OWN MATERIAL - C.O.M. Upholstery Cover Yardage Calculation To calculate yardage required for COM and other non-standard upholstery cover orders, please contact Krug Customer Service at 1.888.578.5784. The repeat is calculated by adding both the vertical and horizontal measurements together and then referring to the chart below for extra yardage required. Unless otherwise stated, upholstery cover rolls are assumed to be a minimum 54” wide. Please use the guide below to calculate the percentage of extra upholstery cover required to cover large repeats. 2”-14” 15”-19” 20”-27” 28”-36” Repeat Repeat Repeat Repeat FABRIC Plain 54 0% 10% 15% 20% 25% 53-50 16% 20% 25% 30% 35% 48 16% 25% 30% 35% 40% 45 40% 50% 55% 60% 65% 36 50% 60% 65% 70% 75% MAHARAM, MOMENTUM & CF STINSON UPHOLSTERY COVERS Krug has co-operative programs with Maharam, Momentum and CF Stinson, designed to provide a wide range of upholstery cover selections for our seating. When placing an order, a Krug customer must specify the complete Maharam, Momentum or CF Stinson upholstery cover number, along with the appropriate Krug model number and finish. Krug will supply the complete product at the prices listed. Orders specifying Maharam, Momentum or CF Stinson upholstery covers cannot be cancelled once the upholstery covers has been ordered. Upholstery Cover Grades To determine the price of a product in Maharam, Momentum or CF Stinson upholstery covers, use the reference lists on pages 8-10 to reference the upholstery cover grade (1-9). Please contact Customer Service for information on upholstery covers not listed. When two upholstery covers are specified for use on seating, the higher grade upholstery cover price will apply to the order. Upholstery Cover Samples If you require additional samples or memos for presentation, please contact Maharam during business hours at: 1-800-645-3943, Momentum at 1-800-366-6839, CF Stinson at 1-800-841-6279. 7 | SOLIS Flammability Standards • Tunnel Test Surface Ratings Class A rating • Class 1 UFAC • Passes State of California Technical Bulletin 117-Section E Please contact Maharam, Momentum or CF Stinson directly for further flammability information pertaining to specific Maharam, Momentum and CF Stinson upholstery covers. Special Conditions Acknowledgements will give the estimated ship date of the finished product. Some Maharam, Momentum and CF Stinson upholstery covers are imported, and availability may affect estimated ship dates. Maharam, Momentum and CF Stinson reserve the right to discontinue patterns or colors from their program. For large projects, please contact Maharam, Momentum, and CF Stinson directly to confirm availability of yardage. MAHARAM UPHOLSTERY COVERS High Performance & Vinyl Upholstery Covers GRADE 4 Article Candid (V) Chime (V) Flicker (V) Ledger (P) Quick (V) Reverie (V) 458600 463720 465350 463730 463770 465850 463740 GRADE 5 Align Alloy Fathom Kernel 464080 466064 466013 464050 GRADE 6 Beside Chance Current Dart Floret Stroll Venn Verse 464020 464010 464730 464040 464070 464740 464360 464030 NOTE: The High Performance/Crypton and Vinyl upholstery covers are particularly suitable for healthcare and other intensive-use environments. (V) Vinyl Other Maharam Upholstery Covers GRADE 3 Division Focus 464540 465910 GRADE 4 Before Bound Bridge Cinch Coincide Lariat (V) Medium Messenger Metric Micro Milestone Overlap Steady Transfer Twice 464430 465320 465908 466002 465808 440401 463490 458640 466014 466099 403901 465924 465947 465934 465909 GRADE 5 Abrash Alter Amble Exchange Fluent Gradient Imprint Marquee Scuba Setting Stack Trait Vary Wafer Whirl 465971 464880 465907 466027 466074 463880 466030 463890 464930 462520 465990 464830 465933 465330 463800 GRADE 6 Akimbo Arbor Assemblage Bitmap Bop Box Cadence Cartouche Certain Chase Comment 464770 464240 465927 466066 460002 464790 466071 465988 465949 465942 462120 Corner Cover Crush Dash Decode Ditto Double Check Etch Flora by Kvadrat Fluent Crypton Intertwine Jumble Magic by Kvadrat Merge Meridian Minimal (P) Plait Recollection Remix by Kvadrat Rivet Scout Scribe Skate Steady Crypton Sudden (P) Tack Tally Tier Tonica by Kvadrat Topas by Kvadrat Tremor Yanagi GRADE 7 Across Along Chenille Multi Circuit Couple Defer Disperse Divina by Kvadrat Divina Melange by Kvadrat Hinge Meander Median Offset Orissa Panache Pennant Perception 464060 465800 464780 462270 464800 465993 462080 466076 460750 466073 460080 466087 465100 466081 464710 466026 466052 465968 465956 462400 405601 466075 462370 465946 463000 466077 465989 466051 460850 460860 466045 459510 465964 465948 466043 466089 466010 464250 466017 460730 460830 465997 466050 466044 465951 460340 460660 466094 462740 (V) Vinyl upholstery, (P) Polyurethane. For additional upholstery covers not shown here, please visit the Maharam website at www.maharam.com. Please contact Krug Customer Service for ordering information on unlisted upholstery covers. Scout Crypton 465931 Steelcut by Kvadrat 464470 Steelcut Trio by Kvadrat 465906 Tonus by Kvadrat 460800 Topple 466080 Touresol 465970 Transit 466069 Treat 464510 Tundra by Kvadrat 460820 Twine 466009 Urban 466079 Zag 466028 GRADE 8 Around Balustrade Cipher Contrary Fasten Fiddle Hallingdal by Kvadrat Hive Peep Random Reel Star by Kvadrat Turn GRADE 9 Aria Centric Chenille Stripe Climb Envelop Highfield by Kvadrat Mechanism Oda by Kvadrat Pictogram Plural Radiant Salon Voyage Weimar 464420 463120 463010 465930 466053 466016 460760 466085 464940 466072 466065 465966 466037 459950 466056 459820 465922 463620 465957 465952 465280 459280 463630 462500 458670 456801 461980 Maharam reserves the right to discontinue upholstery covers at their own discretion and Krug is not responsible for the discontinuation of these upholstery covers. MOMENTUM UPHOLSTERY COVERS Crypton & Vinyl Upholstery Covers GRADE 2 Canter (P) Cashmere (V) GRADE 3 Agora (V) Beeline (P) Glam (V) Rein (V) Sublime (V) GRADE 4 Bravo (V) Crypton Suede Echo (V) Evoke Foray (P) Icon (P) Isla Jolt Lumiere (V) Max (V) Paragon (P) Radiate (P) NOTE: Redux Scribe Smart Suede Tact (V) Tribute Viva GRADE 5 Caption Carouse (V) Crux Delmonico Hermosa Hub Hyphen Flurry Identity (V) Imprint (V) Infusion Innuendo (V) Jax Jest Locale Masque (V) Maxim Narration Niche Periphery (V) Premise Query Rebel (P) Rio Scoupe Silica Silica Tech Sway Topanga Tweed Zoom GRADE 6 Ardour Calabasas Feliz Flection Heyday Huntington Idyll Mantra Mensa Mojo Recollection Soma Spin Strada Telegram GRADE 7 Catalogue Charade Effloresce Elevate Emanate Inhabit Intermezzo Pomona Torque (V) Vinyl (P) Polyurethane The High Performance/Crypton and Vinyl upholstery covers are particularly suitable for healthcare and other intensive-use environments. Other Momentum Upholstery Covers GRADE 2 Ace Axis Basis Cachet Cinch Context Expo Fuse Gauge Insight Interval Jargon Kayo Moda Origin Perk Pinpoint Pivot Ratio Russo Tangent Tate Trek Vox GRADE 3 Boom Form Gusto Hue Knack Mime Sector GRADE 4 Candid Impact Intermix Marquee Oath Pause Racer Realm Relevant Savant Schema Sense Sequence Solo Solo 2 Stance Tek Theory Tone Valet Vario Venue GRADE 5 Bias Bandwidth Crew Delve Dive Duo Element Essentia Gesture Inner Circle Kindle Matter Pearce Portal Veer X-Factor For additional upholstery covers not shown here, please visit the Momentum website at www.themomgroup.com. Please contact Krug Customer Service for ordering information on unlisted upholstery covers. GRADE 6 Acacia Amenity Bento Cienega Dividend Exes Flux Idiom Juncture Melodeon Mod GRADE 7 Bestow Index Method Ohs Pann’s Quad Rae’s Revolve Romeo’s Momentum reserves the right to discontinue upholstery covers at their own discretion. Krug is not responsible for the discontinuation of these upholstery covers. CF STINSON UPHOLSTERY COVERS Performance and Vinyl Upholstery Covers GRADE 2 Avant (V) Laredo (V) Moccasin (V) Rally (V) GRADE 3 Bistro (V) Checkmate (V) Facet (V) Oxford (V) Rialto (V) Shantung (V) Simplicity (V) Ziggy GRADE 4 Chroma (V) Cirque (V) Crypton Suede Crypton Suede Too! Dash (V) GeoMet (V) Liquid (V) Matrix (V) Modulation Raffia (V) Script (V) Snuggle Squire Stipple Tendril Tessuto Tracing Tucson Veranda Whitney (V) GRADE 5 Arc Aspen (V) Banyan (V) NOTE: Bari (V) Breeze Capreni (V) Catwalk Compass Cozy Eli Equinox Fizz (V) Free Hand Hands On Indulgence Line Dance Martini (V) Match Point Mingle On the Money Prisma (V) Rivera (V) Saranac Slide Rule Tree House Tweed Twist Vibe Ybor (V) GRADE 6 Adirondack Amp Bali Beau Monde Beeline Block Party Boutique Bower Calla Carat Champlain Colden Couplet Crush Curves Ahead Dodgeball (V) Estate Too! Folio Geodesic Glimmer Impulse Isabeau Too! Jambi Stripe Jasmine Screen Jester Juxy (V) Labyrinth Lucky Charm Olympus Paradise Parapet Pathways Petals (V) Placid Prestige Raquette Respite Smile (V) Spandrel Straight and Narrow Sunburst Tiles Too! GRADE 7 A New Leaf Aloha Balance Beam Chi w/ Agion Cinnamon Blossom Courtyard Daddy-O w/ Agion Delphi Embrace Fenestra Firefly Flight Fun and Games Good Fortune w/ Agion Horizons Kiawah Lava (V) Mali Panache Reverie Rolling Stones Skyline Sojourn Spark Sumatran Palm True Path w/ Agion Vermont Vintage Willow Talk Zen Garden w/ Agion GRADE 8 Algiers Canterbury Current Double Time w/ Agion Haiku w/ Agion Jam Session w/ Agion Jump w/Agion Now & Zen w/ Agion Radiance Seville Tatami w/ Agion Tuscan Forest Tuscan Hills Tuscan Lattice Umbrian Landscape Umbrian Rain Umbrian Stripe Umbrian Village Up Tempo w/ Agion (V) Vinyl Performance Fabrics and Vinyl upholstery covers are particularly suitable for healthcare and other intensive-use environments. CF Stinson Seating Upholstery Covers GRADE 2 Bryant Park GRADE 3 Ace Atmosphere Confetti Enduro III Lindley Park New Hempstead Transcend Vision GRADE 4 Chauncey Crypton Metro Dakota ** Fender Bender Finite Glacier Halo Happy Hour Highwire Napa ** Pinwheel Scribe Seedling Sphere Sundance w/ StaKleen ** Thicket Trax GRADE 5 Alloy Arezzo Arioso ** Blinker Feelin’ Groovy Frond Interplay In the Round w/Stakleen ** Maywood Persuasion Pinstripe ** Ramble Rear View Splash Stat-Con Static To the Point Vroom Vroom For additional upholstery covers not shown here, please visit the CF Stinson website at www.cfstinson.com. Please contact Krug Customer Service for ordering information on unlisted upholstery covers. GRADE 6 About Face Beep Beep Dashboard Echo Flip Flops Imperial Lantana Optic w/ Agion** Serenity Silverado w/ Agion ** Sterling w/ Agion ** Squiggle Take the Wheel Wink w/ Agion ** Vortexia Wired ** GRADE 8 Tender ** **PVC Free GRADE 7 Cruisin’ Eclipse ** Elderberry Flutter ** Hoopla ** Revolve Seagrass Sweet Dreams CF Stinson reserves the right to discontinue upholstery covers at their own discretion. Krug is not responsible for the discontinuation of these upholstery covers. LAMINATES, MESH COLORS & FRAME COLORS SOLIS | LAMINATE In-Stock Laminates Krug’s in-stock laminates are available in 16 laminate selections. There are 8 wood grain laminates, 4 solid color laminates in a selection of popular shades and 4 Exotic laminates offering a distinguished appearance. Exotic laminates are subject to minimum order quantities and extended lead times. Polymer edges will automatically match the laminate selected. In-Stock Laminates Wood Grain Name & Number Supplier Polymer Edge Names Corretto Cherry HP-288-N Pionite Corretto Cherry Flamenco Cherry T462 Arborite Flamenco Cherry Mocha Cherry HP-341-N Pionite Mocha Cherry Monticello Maple 7925 Wilsonart Monitcello Maple Nightfall WX421-N Pionite Nightfall Samba Cherry T460 Arborite Samba Cherry Shiraz Cherry T472 Arborite Shiraz Cherry Sugarloaf Maple T630 Arborite Sugarloaf Maple Solid Laminates Name & Number Supplier Polymer Edge Names Almond T445 Pionite Almond Black T203 Arborite Black Shadows T201 Arborite Shadows White D354-60 Wilsonart White Exotic Laminate Name & Number Supplier Polymer Edge Names Backwoods Sycamore HP689-N Pionite Backwoods Sycamore Edgewood Sycamore HP690-N Pionite Edgewood Sycamore Gunstock Walnut WW971-N Pionite Gunstock Walnut Thunderstorm HP-359-N Pionite Thunderstorm Non-Stocked Laminates For specific lead time and application questions, please contact Krug Customer Service for your requirement. Upcharges will be applicable for non-stocked laminates, depending on their cost. Non-stocked laminates may be subject to minimum orders sizes. SOLIS | MESH COLORS • • • • • • • White Clay Sand Celery Lakeshore Olive Slate • • • • • • • Warm Grey Black Spring Sky Earth Terra Evening Mesh Specifications & Performance ASTM D4157 Abrasion Resistance (Oscillatory Cylinder) 30,000 Rubs ASTM D5034 Breaking Strength N 2167 Warp 1916 Weft Flammability CAL177 AATCC TM8: Colorfastness to Crooking Dry Class 5 Wet Class 5 ASTM D3511: Brush Pilling Rating 5 ASTM D6797: Ball Burst N 2486 Krug’s Mesh backs covers are produced with Polyester yarns that are 100% recyclable. The yarn dying process is a closed loop system that recycles and recaptures 100% of the energy from the heating systems needed. All dyes contain no heavy metals, carcinogens or allergens. SOLIS | METAL FINISHES Silver Metallic Standard - No Upcharge Solis silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. Additional Solis Frame Finishes are available for an upcharge of $40 list per seat/ table. Available colors are: • White • Parchment • Sand • Taupe • Warm Grey • Cool Grey • Black For all metal finishes other than Silver Metallic, there is a minimum order quantity of 30 units per color. The anti-microbial finish is included in the additional Solis frame finish up-charge. Upcharges for order quantities less than 30 units per color or custom metal finishes, please contact Customer Service to obtain a quote. 11 | SOLIS KRUGEXPRESS PROGRAM PROGRAM DETAILS KrugExpress orders are ready to ship by the date acknowledged. Delivery and shipping schedules may result in actual shipping of orders at a later date. Statutory holidays and scheduled factory vacations may add to acknowledged lead times of KrugExpress orders. Unless otherwise specified on the order, the customer’s standard method of shipping Krug products will be utilized. Available factory capacity for KrugExpress is filled by orders received on a ‘‘first come, first serve’’ basis. If the normal KrugExpress lead time is not available for your order because available capacity has been filled, you will be immediately advised of the earliest available ready-to-ship date. Please consult your Customer Service representative in advance if you wish to confirm the specific lead time availability for a KrugExpress order. Orders must be received by midnight of a given day for that day to be considered the official day the order is received. Order lead times are acknowledged from the date the order is received, but not including the date the order is received. KrugExpress orders must be ‘‘clean’’ when received in order to be considered officially received on a given day, and lead times will be acknowledged from the date orders are determined to be ‘‘clean’’. Changes to KrugExpress orders are not allowed under any circumstances. Orders for product on KrugExpress must clearly state: ‘‘KrugExpress’’. Maharam, Momentum and CF Stinson are available on KrugExpress. *Some conditions apply. SEATING PROGRAM Orders for seating products on the KrugExpress program may be subject to quantity maximums. Please contact Krug Customer Service for more information. Quantity maximums are dependent upon available capacity, in order to insure that we ship all orders on time. Only standard wood finishes are available for KrugExpress orders. Please note that Solis Moisture barriers and the CAL 133 are not available on KrugExpress. SOLIS | PRODUCT FEATURES CLEAN OUT All Solis seating models have a built-in clean out feature: a space at the back of the seat that allows dirt, debris and liquids to fall to the floor for easy clean up and maintenance - designed so that it does not detract from the comfort or appearance of the product. TUBULAR STEEL CHAIR FRAME The overall aesthetic frame of the chair is built from structural steel tubing, both elliptical and rectangular for exceptional strength and appealing design. The frame is electro welded and polished joints for ease of cleaning and a one piece look. Available in eight powder-coated finishes. Silver Metallic is offered as Krug’s standard finish. For all metal finishes other than Silver Metallic, there is a minimum quantity of 30 units per color and are available for an upcharge of $40 list per seat/table. Microban anti-microbial finish is standard, with no upcharge, when frame finishes other than silver metallic is ordered. Solis silver metallic frames are available with an antimicrobial finish for an upcharge of $40 list per chair or table. Upcharges for quantities less than 30 units per color, per order can be obtained through Customer Service. STEEL SEAT FRAME The structural seat frame is made from welded steel with a powder-coated finish that allows Solis to well exceed ANSI/BIFMA standards. HIGH DENSITY FOAM Solis features dual density foam that is soft on the outside for comfort, dense on the inside for high durability. The seat and back foam features a compound curvature that supports healthy sitting postures, while also designed to ease ingress and egress. LATEX-FREE Krug products are made with latex-free materials, to prevent the allergic reaction that latex causes in some people. GANGING All Solis Freestanding chairs can be ganged using a ganging bracket. The powder-coated metal plate is fastened to the underside of the steel side rails using the pre-existing holes in the frame. FLEX BACK The ergonomically-designed back has a slight flexing action, which significantly enhances comfort. WALL SAVER The angle of the back and the rear legs are designed to keep the back away from the wall, to prevent wear and damage to both the chairs and to the walls of the facility. Patient and Guest chairs with mesh backs are excluded as they do not have the wall saver feature. CASTERS Locking casters are available on all 21” and 24” guest and patient chairs. Two rear casters are available for an upcharge of $50 list per chair. Four casters are available for $75 list per chair. Hard casters are standard, soft wheel casters can be ordered for $40 list per chair or $20 list for two casters. The Solis caster is not a heavy-duty caster - it is designed and rated for normal use and load bearing, but has the potential to fail with excessive use, force, or weight. The caster was designed to allow the chairs to be moved for ease of cleaning and furniture arranging. Krug is not responsible for caster breakage under any circumstances. Solis casters can purchased for field replacement. WOOD SIDE RAILS Solis can be specified with solid wood side rails, which, along with the selection of wood arms and a choice of metal finishes, provides a warmer look and feel. All Solis wood components feature Krug’s anti-microbial, high durability Enduraguard finish. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list per chair in Maple. Wood side rails are not available with closed arm panels. WOODEN ARM Wood arms are available in either beech or maple hardwood and in 22 Krug standard finishes. Maple arm caps are available for an up-charge of $50 list per arm using beech pricing. EASY ACCESS ADJUSTABLE GLIDES With the larger footprint of this chair and critical importance of stability for the user, we have included adjustable glides on the front legs - this allows the Easy Access chair to be perfectly leveled to any floor for maximum safety and stability. SOLIS | 12 SOLIS | PRODUCT FEATURES ANTI-MICROBIAL FINISH Solis products are available with anti-microbial finish technology that inhibits the growth of molds and mildews. Surfaces coated in this finish will have reduced fungal growth, and spores from germs, microbes and bacteria will not multiply on the wood and metal. The anti-microbial finish is standard on all wood components, at no additional up-charge. Solis silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. FINISH DURABILITY The Krug Enduraguard finish, a proprietary catalyzed varnish formulation, has been repeatedly shown, through independent laboratory testing, to be the industry leader in durability and abrasion resistance. The Krug finish looks better longer than competitors, and is uniquely suited to the demands of healthcare environments. ANTI-MICROBIAL URETHANE ARM Solis arms are durable, comfortable, and long lasting. They are made with anti-microbial technology injected throughout the arms, so the anti-microbial properties are retained even if an arm is damaged on the surface. ADJUSTABLE HEADREST The adjustable headrest uses dual density foam providing excellent support and comfort. The headrest is securely fastened using an innovative clip allowing the headrest to be easily removed for cleaning and/or replacement. The headrest is easily adjusted by sliding the headrest vertically allowing the user to maximize their comfort. EASY CLEAN BACKREST COVERS Easy clean backrest covers are available on all mesh back chairs. They are removable, replaceable and cleanable. The easy clean backrest cover features a foam interior for comfort and durability. REPLACEABLE COMPONENTS Solis chairs are uniquely designed to allow virtually all major components to be field replaced, providing a very cost effective means to significally extend the life of the product. Seats, backs, arms, frames and casters are field replaceable. Pricing and model numbers can be viewed online at www.krug.ca. WEIGHT CAPACITIES Weight capacities are as follows: Guest & Patient Chairs (21” & 24”) - 350 lbs Bariatric Chairs (30” & 44”) - 750 lbs Multiple Seating & Pre-configured - 350 lbs per seat 2-Seat Free Span - 525 lbs per unit 3-Seat Free Span = 750 lbs per unit CUSTOM CAPABILITIES Modifications in dimension, seat and back shape or thickness, and other modifications are possible with Krug's capability to customize for specific requirements and needs. We can also provide custom finishes. OPTIONS Combination Upholstery Options When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics will be applied. When graded in combination upholstery is selected, use the highest upholstery selected or contact Customer Service for a quote (please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote). 13 | SOLIS CAL133 & Moisture Barrier California Technical Bulletin 133 is a flammability test for seating. Krug offers a compliance method, in combination with non-flammable upholstery covers, may enable products to meet certification requirements for this test. This process at the same time also provides the products with a Moisture Barrier - a treatment that helps to prevent the passage of liquids and moisture to inside of the uphostered components thereby conferring sanitary and anti-infection benefits. So when CAL 133 is specified, the product also automatically has a Moisture Barrier, and when a Moisture Barrier is specified , the product also features the compliance method and low flammability features of CAL 133. The application of this up-charge and the compliance method does not mean that the specific configuration of product and upholstery cover are tested and officially certified as being CAL133 compliant. If the official certification is required, Krug will provide this (through an independent certified testing laboratory) at a charge of $700 per item, plus the cost of the product to be tested. Lead time for certification testing is typically 4-8 weeks. Krug assumes no responsibility for the testing of our products in combination with upholstery covers, or for the results of any testing conducted. Some specific configurations of products and upholstery have already been tested. Please contact Customer Service for additional information. CAL 133 and Moisture Barrier is available for $40 list per yard. Removable Covers & Replacement Components • Seat Covers - $55 list per seat • Back Covers (21”, 24”) - $35 list per chair (uph. only) • Back Covers (30” and 44”) - $55 list per chair. Optional Removeable seat and back covers can be quickly installed on Solis products that were originally ordered with the Removable cover option. Replacement seat and back covers can also be installed on Solis products that were not originally ordered with the Removable cover option, with some simple staple removal on the original seats and backs. Complete Mesh backs can be ordered and field replaced. Cleanable Under-Seat Splashguard All Solis seating models are available with a plastic moisture barrier that covers and encloses the underside of the seat (while still allowing air transfer and ventilation in and out of the seat cushion). The Splashguard significantly enhances the anti-microbial and germ resistance properties of the product, by enclosing the part of the chair that can be most susceptible to infection-causing pathogens. The Splashguard is a smooth, easy to clean surface, either while on the chair or when removed, and is also field replaceable. The upcharges for the Splashguard are based on the size of the seat: • 21" and 24" seats - $25 list • 30" seat - $30 list • 44" seat - $40 list ADDITIONAL FEATURES • Lifetime warranty • Greenguard certified • Spring seat construction, providing exceptional comfort and longer life for seat foam. • Solis sets a new standard for comfort and ergonomics in healthcare seating. • Designed for ergonomically-correct posture and long- term sitting comfort, with contoured back and seat molds. Multi-density foam, provides lumbar, thoracic and pelvic support, while encouraging a healthy sitting posture. • Large, rounded arms provide support for safe and easy ingress and egress. • Certified to meet CAL 117 with most fabrics • Certified to meet CTB 133/ ASTM E 1537 with appropriate fabrics SOLIS | GUEST & BARIATRIC DIMENSIONS & COM REQUIREMENTS Overall Width Overall Depth Overall Height Seat Height UPHOLSTERED BACK 21” Seat 25 28 34.5 18.5 26 20 20 51 16 1.6 0.9 1.5 0.8 24” Seat 28 28 34.5 18.5 26 23 20 55 18 1.6 0.9 1.5 0.8 30” Seat 34 28 34.5 18.5 26 29 20 60 22 2.5 0.9 1.6 0.8 44” Seat 48 28 34.5 18.5 26 43 20 74 31 3.2 1.1 2.3 0.8 MESH BACK 21” Seat 25 28 34.5 18.5 26 20 20 49 16 - 0.9 - 0.8 24” Seat 28 34.5 18.5 26 23 20 52 18 - 0.9 - 0.8 28 Height of Arms from Floor Width Between Arms Seat Depth Shipping Weight Cube COM Yardage Seat & Back COM Yardage Seat COM COM Yardage Yardage Back Closed Arm Panel COM - YARDAGE REQUIREMENTS Yardage Seat & Back Yardage Seat Yardage Back Yardage Closed Arm Panel 21” & 24” - One Chair 1.6 0.9 1.5 0.8 21” & 24” - Two Chairs 3.1 1.3 2.3 1.2 21” & 24” - Three Chairs 4.9 2.1 3.1 1.6 30” Bariatric - One Chair 2.5 0.9 1.6 0.8 30” Bariatric - Two Chairs 5 1.8 3.2 1.2 30” Bariatric - Three Chairs 7.5 2.7 4.8 1.6 44” Bariatric - One Chair 3.2 1.1 2.3 0.8 44” Bariatric - Two Chairs 5.6 2.2 3.9 1.2 44” Bariatric - Three Chairs 8.7 3.3 5.5 1.6 Multiple yardage requirements can also be used for Guest Back Easy Access chairs and Guest Back Start, Centre, End Multiple seating. Note: Some vinyls, leathers & upholsteries are not suitable for application on Solis seating. The approval process is as follows: 1. A sample of the COM must be provided to Krug Customer Service prior to or at the time of order. For Maharam, Momentum or CF Stinson, Krug will obtain the fabric sample. 2. The sample will be reviewed and the customer advised if the fabric is unsuitable. 3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability. SOLIS | GUEST & BARIATRIC l UPHOLSTERED BACKS Solis Guest Chairs with Upholstered Backs are available in 21”, 24”, 30” and 44” widths. SOLIS | GUEST l MESH BACKS Solis Guest Chairs with Mesh Backs are available in 21” and 24” widths only. SOLIS | 14 SOLIS | GUEST & BARIATRIC COM 1 2 COL 3 4 21” Open Arm, Mesh Back SOL2-GM21OPU Urethane SOL2-GM21OPW Beech 639 719 660 740 681 761 723 803 765 845 21” Open Arm, Upholstered Back SOL2-GU21OPU Urethane SOL2-GU21OPW Beech 672 752 706 786 740 820 808 888 24” Open Arm, Mesh Back SOL2-GM24OPU Urethane SOL2-GM24OPW Beech 665 745 686 766 707 787 24” Open Arm, Upholstered Back SOL2-GU24OPU Urethane SOL2-GU24OPW Beech 698 778 732 812 30” Open Arm, Upholstered Back SOL2-GU30OPU Urethane SOL2-GU30OPW Beech 814 894 44” Open Arm, Upholstered Back SOL2-GU44OPU Urethane SOL2-GU44OPW Beech 942 1022 DESCRIPTION/MODEL Arm Type FABRIC GRADES 5 6 7 LEATHER 8 9 807 887 849 929 891 971 956 1036 875 955 943 1023 1011 1091 1078 1158 1214 1294 749 829 791 871 833 913 875 955 917 997 982 1062 767 847 834 914 902 982 970 1050 1037 1117 1105 1185 1241 1321 867 947 921 1001 1026 1106 1132 1212 1238 1318 1343 1423 1450 1530 1662 1742 995 1075 1048 1128 1153 1233 1260 1340 1365 1445 1472 1552 1577 1657 1789 1869 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Guest chairs (all sizes, upholstered backs only) are available with Removable Seat Covers for an upcharge of $55 list per chair. Solis Guest chairs (21”, 24”) are available with Removable Back Covers for an upcharge of $35 list per chair. Complete Mesh backs (21” & 24”) can be ordered and field replaced. 30” and 44” models are also available with Removable Back Covers for $55 list per chair. 21” & 24” Guest chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per chair. 30” Bariatric models are available with a Cleanable Under-Seat Splashguard for an upcharge of $30 list per chair. 44” Bariatric models are available with a Cleanable Under-Seat Splashguard for an upcharge of $40 list per chair. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Casters are available on 21” and 24” guest chairs for an upcharge of $50 list for 2 casters or $75 list for 4 casters. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS (per chair) - please add the following up charges for closed arm panels. Fabric Grades (COM) 1 2 (COL) 3 4 5 6 7 2 ARMS 264 282 300 335 371 406 442 8 9 478 549 PRODUCT CODE KEY Line Series SOL 2 Solis Chair Chair Type G Guest Seating Back Type Size U 21 Upholstered Back M Arm Type OPW Open Arm - Wood Arm 24 Mesh Back 21” & 24” Only OPU Open Arm Urethane Arm 30 CLW Closed Arm - Wood Arm 44 CLU Closed Arm Urethane Arm 15 | SOLIS SOLIS | PATIENT & BARIATRIC DIMENSIONS & COM. REQUIREMENTS Overall Width Overall Depth Overall Height Seat Height Height of Arms from Floor UPHOLSTERED BACK 21" Seat 25 28 43.75 18.5 26 20 20 54 21 2.1 0.9 2.0 0.8 24" Seat 28 28 43.75 18.5 26 23 20 58 23 2.1 0.9 2.0 0.8 30” Seat 34 28 43.75 18.5 26 29 20 64 28 3.1 0.9 2.2 0.8 MESH BACK 21" Seat 25 28 43.75 18.5 26 20 20 50 21 - 0.9 - 0.8 24" Seat 28 43.75 18.5 26 23 20 53 23 - 0.9 - 0.8 28 Width Between Arms Seat Depth Shipping Cubes COM Weight Yardage Seat & Back COM Yardage Seat COM Yardage Back COM Yardage Closed Arm Panel COM - YARDAGE REQUIREMENTS Yardage Seat & Back Yardage Seat Yardage Back Yardage Closed Arm Panel 21” & 24” - One Chair 2.1 0.9 2 0.8 21” & 24” -Two Chairs 4 1.3 3.1 1.2 21” & 24” - Three Chairs 6.1 2.1 4.2 1.6 30” Bariatric - One Chair 3.1 0.9 2.2 0.8 30” Bariatric - Two Chairs 6.2 1.8 4.4 1.2 30” Bariatric - Three Chairs 9.3 2.6 6.6 1.6 Multiple yardage requirements can also be used for Patient Back Easy Access chairs and Patient Back Start, Centre, End Multiple seating. Note: Some vinyls, leathers & fabrics may not be suitable for application on Solis seating. The approval process is as follows: 1. A sample of the COM. must be provided to Krug Customer Service prior to or at the time of order. For Maharam, Momentum or CF Stinson, Krug will obtain the fabric sample. 2. The sample will be reviewed and the customer advised if the fabric is unsuitable. 3. The COM. fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability. SOLIS | PATIENT l UPHOLSTERED BACK Solis Patient Chairs with Upholstered Backs are available in 21”, 24” and 30” widths. SOLIS | PATIENT l MESH BACK Solis Patient Chairs with Mesh Backs are available in 21” and 24” widths only. SOLIS | 16 SOLIS | PATIENT & BARIATRIC COM 1 2 COL 3 4 21” Open Arm, Mesh Back SOL2-PM21OPU Urethane SOL2-PM21OPW Beech 699 779 720 800 741 821 783 863 825 905 21” Open Arm, Upholstered Back SOL2-PU21OPU Urethane SOL2-PU21OPW Beech 735 815 779 859 824 904 913 993 24” Open Arm, Mesh Back SOL2-PM24OPU Urethane SOL2-PM24OPW Beech 724 804 745 825 766 846 24” Open Arm, Upholstered Back SOL2-PU24OPU Urethane SOL2-PU24OPW Beech 761 841 806 886 30” Open Arm, Upholstered Back SOL2-PU30OPU Urethane 945 SOL2-PU30OPW Beech 1025 1011 1091 DESCRIPTION/MODEL Arm Type FABRIC GRADES 5 6 7 LEATHER 8 9 867 947 909 989 951 1031 1016 1096 1001 1081 1091 1171 1179 1259 1268 1348 1446 1526 808 888 850 930 892 972 934 1014 976 1056 1041 1121 850 930 939 1019 1028 1108 1116 1196 1206 1286 1295 1375 1473 1553 1076 1156 1207 1287 1339 1419 1470 1550 1601 1681 1732 1812 1995 2075 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Patient chairs (all sizes, upholstered backs only) are available with Removable Seat Covers for an upcharge of $55 list per chair. Solis Patient chairs (21”, 24”) are available with Removable Back Covers for an upcharge of $35 list per chair. Complete Mesh backs (21” & 24”) can be ordered and field replaced. 30” model is also available with Removable Back Covers for $55 list per chair. 21” & 24” Guest chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per chair. 30” Bariatric models are available with a Cleanable Under-Seat Splashguard for an upcharge of $30 list per chair. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Casters are available on 21” and 24” guest chairs for an upcharge of $50 list for 2 casters or $75 list for 4 casters. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Solis silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS (per chair) - please add the following up charges for closed arm panels. Fabric Grades (COM) 1 2 (COL) 3 4 5 6 7 2 ARMS 264 282 300 335 371 406 442 8 9 478 549 PRODUCT CODE KEY Line Series SOL 2 Solis Chair Chair Type P Patient Seating Back Type Size U 21 Upholstered Back M Arm Type OPW Open Arm - Wood Arm 24 Mesh Back 21” & 24” Only OPU Open Arm Urethane Arm 30 44 CLW Closed Arm - Wood Arm CLU Closed Arm Urethane Arm 17 | SOLIS SOLIS | EASY ACCESS CHAIR DIMENSIONS & COM. REQUIREMENTS Overall Width Overall Depth Overall Height Seat Height Height of Arms from Floor Width Seat Between Depth Arms Shipping Cube Weight COM Yardage Seat & Back COM Yardage Seat COM Yardage Back UPHOLSTERED GUEST BACK 21” Seat 25 30.75 24” Seat 28 30.75 40.5 40.5 24.5 24.5 32 32 20 23 20 20 51 55 16 18 1.6 1.6 0.9 0.9 1.6 1.6 MESH GUEST BACK 21” Seat 25 24” Seat 28 40.5 40.5 24.5 24.5 32 32 20 23 20 20 49 52 16 18 - 0.9 0.9 - 49.75 49.75 24.5 24.5 32 32 20 23 20 20 54 58 21 23 2.1 2.1 0.9 0.9 2.0 2.0 30.75 30.75 UPHOLSTERED PATIENT BACK 21" Seat 25 30.75 24" Seat 28 30.75 MESH PATIENT BACK 21" Seat 25 30.75 49.75 24.5 32 20 20 50 21 0.9 24" Seat 28 30.75 49.75 24.5 32 23 20 53 23 0.9 Footreat height (All Models) 7.25” When ordering more than one Easy Access chair, for yardage requirements please refer to page 14 for Guest backs and page 16 for Patient backs. COM. 1 2 6 7 LEATHER 8 9 923 1003 944 1024 965 1045 1007 1087 1049 1129 1091 1171 1133 1213 1175 1255 1240 1320 21” Guest, Open Arm, Upholstered Back SOL2-HGU21OPU Urethane 972 SOL2-HGU21OPW Beech 1052 1007 1087 1042 1122 1112 1192 1181 1261 1251 1331 1321 1401 1390 1470 1530 1610 24” Guest, Open Arm, Mesh Back SOL2-HGM24OPU Urethane SOL2-HGM24OPW Beech 942 1022 963 1043 984 1064 1026 1106 1068 1148 1110 1190 1152 1232 1194 1274 1259 1339 24” Guest, Open Arm, Upholstered Back SOL2-HGU24OPU Urethane 992 SOL2-HGU24OPW Beech 1072 1028 1108 1063 1143 1134 1214 1206 1286 1277 1357 1347 1427 1418 1498 1561 1641 21” Patient, Open Arm, Mesh Back SOL2-HPM21OPU Urethane SOL2-HPM21OPW Beech 993 1073 1014 1094 1035 1115 1077 1157 1119 1199 1161 1241 1203 1283 1245 1325 1310 1390 21” Patient, Open Arm, Upholstered Back SOL2-HPU21OPU Urethane 1045 SOL2-HPU21OPW Beech 1125 1092 1172 1138 1218 1232 1312 1324 1404 1418 1498 1511 1591 1606 1686 1792 1872 24” Patient, Open Arm, Mesh Back SOL2-HPM24OPU Urethane SOL2-HPM24OPW Beech 1022 1102 1043 1123 1064 1144 1106 1186 1148 1228 1190 1270 1232 1312 1274 1354 1339 1419 24” Patient, Open Arm, Upholstered Back SOL2-HPU24OPU Urethane 1076 SOL2-HPU24OPW Beech 1156 1124 1204 1172 1252 1268 1348 1364 1444 1460 1540 1556 1636 1653 1733 1845 1925 DESCRIPTION/MODEL Arm Type 21” Guest, Open Arm, Mesh Back SOL2-HGM21OPU Urethane SOL2-HGM21OPW Beech COL 3 4 FABRIC GRADES 5 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Easy Access chairs are available with Removable Seat Covers for an upcharge of $55 list per chair. Solis Easy Access chairs are available with Removable Back Covers (upholstered backs only) for an upcharge of $35 list per chair. Complete mesh backs (21”& 24”) can be ordered and field replaced. 21” & 24” Easy Access Chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per chair. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and ordering quantities. PRODUCT CODE KEY Line Series Chair Type Style Back Type Size SOL 2 H G U 21 Solis Chair Easy Access Guest Upholstered Back P M Patient Mesh Arm Type OPW Open Arm - Wood Cap 24 OPU Open Arm Urethane Arm Cap SOLIS | 18 SOLIS | MULTIPLE SEATING - GUEST BACKS DIMENSIONS & COM. REQUIREMENTS - PRE-CONFIGURED UNITS Overall Overall Overall Width Depth Height MESH BACK PCGM21X2 47 PCGM21X3 69.5 PCGM24X2 53 PCGM24X3 78.5 Seat Height Height of Arms from Floor Width Between Arms Seat Depth Shipping Weight Cube COM. Seat & Back Yardage COM Fabric Seat Yardage COM. Fabric Back Yardage COM. Fabric Closed Arm Panel Yardage 28 28 28 28 34.5 34.5 34.5 34.5 18.5 18.5 18.5 18.5 26 26 26 26 20 20 23 23 20 20 20 20 90 126 96 135 30 44 34 50 - 1.3 2.1 1.3 2.1 - 1.2 1.6 1.2 1.6 UPHOLSTERED BACK PCGU21X2 47 28 PCGU21X3 69.5 28 PCGU24X2 53 28 PCGU24X3 78.5 28 34.5 34.5 34.5 34.5 18.5 18.5 18.5 18.5 26 26 26 26 20 20 23 23 20 20 20 20 94 132 102 144 30 44 34 50 3.1 4.7 3.1 4.7 1.3 2.1 1.3 2.1 2.3 3.7 2.3 3.7 1.2 1.6 1.2 1.6 DIMENSIONS & COM. REQUIREMENTS - START UNITS Seat Height Height of Arms from Floor Width Between Arms 34.5 34.5 18.5 18.5 26 26 20 23 20 20 41 44 16 18 - 0.9 0.9 - 0.4 0.4 0.8 0.8 34.5 34.5 34.5 34.5 18.5 18.5 18.5 18.5 26 26 26 26 20 23 29 43 20 20 20 20 43 47 52 66 16 18 22 31 1.6 1.6 2.5 2.5 0.9 0.9 0.9 0.9 1.6 1.6 2.5 2.5 0.4 0.4 0.4 0.4 0.8 0.8 0.8 0.8 Overall Overall Overall Width Depth Height MESH BACK SGM21 25 SGM24 28 28 28 UPHOLSTERED BACK SGU21 25 28 SGU24 28 28 SGU30 34 28 SGU44 48 28 COM. COM. COM. COM COM. Fabric Fabric Seat & Fabric Fabric Closed Arm Closed Arm Back Seat Back Panel (1 Arm) Panel (2 Arms) Cube Yardage Yardage Yardage Yardage Yardage Seat Shipping Depth Weight DIMENSIONS & COM. REQUIREMENTS - CENTER UNITS COM. COM Seat & Fabric Back Seat Yardage Yardage COM. Fabric Back Yardage COM. Fabric Closed Arm Panel Yardage Overall Depth Overall Height Seat Height Height of Arms from Floor Width Between Arms Seat Depth Shipping Weight Cube 28 28 34.5 34.5 18.5 18.5 26 26 20 23 20 20 35 38 16 18 - 0.9 0.9 - 0.4 0.4 UPHOLSTERED BACK CGU21 23 28 CGU24 26 28 CGU30 32 28 CGU44 46 28 34.5 34.5 34.5 34.5 18.5 18.5 18.5 18.5 26 26 26 26 20 23 29 43 20 20 20 20 37 41 46 60 16 19 22 31 1.6 1.6 2.5 2.5 0.9 0.9 0.9 0.9 1.6 1.6 2.5 2.5 0.4 0.4 0.4 0.4 Overall Width MESH BACK CGM21 23 CGM24 26 DIMENSIONS & COM. REQUIREMENTS - END UNITS Overall Width Overall Depth Overall Height Seat Height Height of Arms from Floor Width Between Arms Seat Depth Shipping Weight Cube COM. Seat & Back Yardage COM Fabric Seat Yardage 28 28 34.5 34.5 18.5 18.5 26 26 20 23 20 20 35 38 16 18 - 0.9 0.9 - 0.4 0.4 UPHOLSTERED BACK EGU21 23 28 EGU24 26 28 EGU30 32 28 EGU44 46 28 34.5 34.5 34.5 34.5 18.5 18.5 18.5 18.5 26 26 26 26 20 23 29 43 20 20 20 20 37 41 46 60 16 18 22 31 1.6 1.6 2.5 2.5 0.9 0.9 0.9 0.9 1.6 1.6 2.5 2.5 0.4 0.4 0.4 0.4 MESH BACK EGM21 23 EGM24 26 ORDERING NOTES: When ordering multiple Start, Center, End units please refer to page 14 for Yardage Requirements. 19 | SOLIS COM. COM. Fabric Fabric Back Closed Arm Yardage Panel Yardage SOLIS | MULTIPLE SEATING - GUEST BACKS DIMENSIONS & COM. REQUIREMENTS - FREE SPAN WITH NO CENTER ARM Overall Overall Width Depth Overall Height Height of Seat Arms Height from Floor Width Between Seat Arms Depth Shipping Weight COM. COM Seat & Fabric Back Seat Cube Yardage Yardage COM. Fabric Back Yardage COM. Fabric Closed Arm Panel Yardage MESH BACK PCFGM21X2A 46.5 PCFGM21X3A 68 PCFGM24X2A 52.25 PCFGM24X3A 77 28 28 28 28 34.5 34.5 34.5 34.5 18.5 18.5 18.5 18.5 26 26 26 26 41.5 63 47.5 72 20 20 20 20 85 114 92 124 30 44 34 50 - 1.3 2.1 1.3 2.1 - 0.8 0.8 0.8 0.8 UPHOLSTERED BACK PCFGU21X2A 46.5 PCFGU21X3A 68 PCFGU24X2A 52.25 PCFGU24X3A 77 28 28 28 28 34.5 34.5 34.5 34.5 18.5 18.5 18.5 18.5 26 26 26 26 41.5 63 47.5 72 20 20 20 20 89 120 96 131 30 44 34 50 3.1 4.7 3.1 4.7 1.3 2.1 1.3 2.1 2.3 3.7 2.3 3.7 0.8 0.8 0.8 0.8 DIMENSIONS & COM. REQUIREMENTS - FREE SPAN WITH CENTER ARM MESH BACK PCFGM21X2B PCFGM21X3B PCFGM24X2B PCFGM24X3B 47.25 69.5 53.25 78.5 UPHOLSTERED BACK PCFGU21X2B 47.25 PCFGU21X3B 69.5 PCFGU24X2B 53.25 PCFGU24X3B 78.5 PCFG21X2B PCFG21X3B PCFG24X2B PCFG24X3B Seat Depth Shipping Weight Cube COM Fabric Seat Yardage COM. Fabric Back Yardage Overall Height Seat Height 28 28 28 28 34.5 34.5 34.5 34.5 18.5 18.5 18.5 18.5 26 26 26 26 20 20 23 23 20 20 20 20 93 130 100 140 30 44 34 50 - 1.3 2.1 1.3 2.1 - 28 28 28 28 34.5 34.5 34.5 34.5 18.5 18.5 18.5 18.5 26 26 26 26 20 20 23 23 20 20 20 20 97 136 104 147 30 44 34 50 3.1 4.7 3.1 4.7 1.3 2.1 1.3 2.1 2.3 3.7 2.3 3.7 Overall Overall Width Depth Width Between Arms COM. Seat & Back Yardage Height of Arms from Floor COM. Fabric Closed Arm Panels ( 2 Arms) COM Fabric Closed Arm Panels ( 3 Arms) 0.8 0.8 0.8 0.8 1.2 COM. Fabric Closed Arm Panels ( 4 Arms) 1.6 1.2 1.6 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Multiple Guest chairs (all sizes) are available with Removable Seat Covers for an upcharge of $55 list per seat. Solis Multiple Guest chairs (21”, 24”) are available with Removable Back Covers (upholstered backs only) for an upcharge of $35 list per back. Complete mesh backs (21” & 24”) can be ordered and field replaced. 30” and 44” models are also available with Removable Back Covers for $55 list per back. 21” & 24” Guest chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per chair. 30” Bariatric models are available with a Cleanable Under-Seat Splashguard for an upcharge of $30 list per chair. 44” Bariatric models are available with a Cleanable Under-Seat Splashguard for an upcharge of $40 list per chair. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS - please add the following list upcharges for closed arm panels. Fabric Grades (COM) 1 2 (COL) 3 4 5 6 1 ARM 132 141 150 168 185 203 2 ARMS 264 282 300 335 371 406 3 ARMS 396 423 449 503 556 610 4 ARMS 528 563 599 670 742 813 7 221 442 663 844 8 239 478 717 955 9 275 549 824 1098 SOLIS 20 SOLIS | MULTIPLE SEATING - PRE-CONFIGURED GUEST UNITS DESCRIPTION/MODEL Arm Type COM 1 COL 3 2 4 FABRIC GRADES 5 6 7 LEATHER 8 9 2 Seat - 21” Open Arm Pre-configured Guest Unit, Mesh Back SOL2-PCGM21X2OPU Urethane 1205 1247 1289 SOL2-PCGM21X2OPW Beech 1325 1367 1409 1373 1493 1457 1577 1541 1661 1625 1745 1709 1829 1839 1959 2 Seat - 21” Open Arm Pre-configured Guest Unit , Upholstered Back SOL2-PCGU21X2OPU Urethane 1266 1335 1402 SOL2-PCGU21X2OPW Beech 1386 1455 1522 1538 1658 1673 1793 1809 1929 1944 2064 2080 2200 2350 2470 3 Seat - 21” Open Arm Pre-configured Guest Unit, Mesh Back SOL2-PCGM21X3OPU Urethane 1729 1792 1855 SOL2-PCGM21X3OPW Beech 1889 1952 2015 1981 2141 2107 2267 2233 2393 2359 2519 2485 2645 2680 2840 3 Seat - 21” Open Arm Pre-configured Guest Unit, Upholstered Back SOL2-PCGU21X3OPU Urethane 1818 1920 2021 SOL2-PCGU21X3OPW Beech 1978 2080 2181 2224 2384 2427 2587 2631 2791 2834 2994 3037 3197 3444 3604 2 Seat - 24” Open Arm Pre-configured Guest Unit, Mesh Back SOL2-PCGM24X2OPU Urethane 1239 1281 1323 SOL2-PCGM24X2OPW Beech 1359 1401 1443 1407 1527 1491 1611 1575 1695 1659 1779 1743 1863 1873 1993 2 Seat - 24” Open Arm Pre-configured Guest Unit, Upholstered Back SOL2-PCGU24X2OPU Urethane 1302 1370 1438 SOL2-PCGU24X2OPW Beech 1422 1490 1558 1573 1693 1709 1829 1844 1964 1980 2100 2116 2236 2386 2506 3 Seat - 24” Open Arm Pre-configured Guest Unit, Mesh Back SOL2-PCGM24X3OPU Urethane 1782 1845 1908 SOL2-PCGM24X3OPW Beech 1942 2005 2068 2034 2194 2160 2320 2286 2446 2412 2572 2538 2698 2733 2893 3 Seat - 24” Open Arm Pre-configured Guest Unit, Upholstered Back SOL2-PCGU24X3OPU Urethane 1874 1974 2074 SOL2-PCGU24X3OPW Beech 2034 2134 2234 2272 2432 2471 2631 2670 2830 2869 3029 3069 3229 3467 3627 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Pre-configured chairs (all sizes) are available with Removable Seat Covers for an upcharge of $55 list per seat. Solis Pre-configured Guest chairs (21”, 24”) are available with Removable Back Covers (upholstered backs only) for an upcharge of $35 list per back. Complete mesh backs (21” & 24”) can be ordered and field replaced. 21” & 24” Pre-configured chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per seat. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS - please add the following up charges for closed arm panels. Fabric Grades (COM) 1 2 (COL) 3 4 5 6 3 ARMS 396 423 449 503 556 610 4 ARMS 528 563 599 670 742 813 7 663 844 8 717 955 9 824 1098 PRODUCT CODE KEY Line Series Chair Type Back Type Size SOL 2 PCG U 21X2 Solis Chair Pre-configured Guest Multiple Unit Upholstered Back M Arm Type OPW Open Arm - Wood Arm 21X3 Mesh Back OPU Open Arm Urethane Arm 24X2 24X3 CLW Closed Arm - Wood Arm CLU Closed Arm Urethane Arm 21 | SOLIS SOLIS | MULTIPLE SEATING - START, CENTER & END GUEST UNITS DESCRIPTION/MODEL START CENTER COL 3 4 7 LEATHER 8 21” Open Arm Start Guest Unit, Mesh Back SOL2-SGM21OPU Urethane 639 660 SOL2-SGM21OPW Beech 719 740 9 681 761 723 803 765 845 807 887 849 929 891 971 956 1036 21” Open Arm Start Guest Unit, Upholstered Back SOL2-SGU21OPU Urethane 672 706 SOL2-SGU21OPW Beech 752 786 740 820 808 888 875 955 943 1023 1011 1091 1078 1158 1214 1294 24” Open Arm Start Guest Unit, Mesh Back SOL2-SGM24OPU Urethane 665 686 SOL2-SGM24OPW Beech 745 766 707 787 749 829 791 871 833 913 875 955 917 997 982 1062 24” Open Arm Start Guest Unit, Upholstered Back SOL2-SGU24OPU Urethane 698 732 SOL2-SGU24OPW Beech 778 812 767 847 834 914 902 982 970 1050 1037 1117 1105 1185 1241 1321 30” Open Arm Start Guest Unit, Upholstered Back SOL2-SGU30OPU Urethane 814 867 921 SOL2-SGU30OPW Beech 894 947 1001 1026 1106 1132 1212 1238 1318 1343 1423 1450 1530 1662 1742 44” Open Arm Start Guest Unit, Upholstered Back SOL2-SGU44OPU Urethane 942 995 1048 SOL2-SGU44OPW Beech 1022 1075 1128 1153 1233 1260 1340 1365 1445 1472 1552 1577 1657 1789 1869 21” Open Arm Center Guest Unit, Mesh Back SOL2-CGM21OPU Urethane 574 595 SOL2-CGM21OPW Beech 614 635 616 656 658 698 700 740 742 782 784 824 826 866 891 931 21” Open Arm Center Guest Unit, Upholstered Back SOL2-CGU21OPU Urethane 603 637 671 SOL2-CGU21OPW Beech 643 677 711 739 779 807 847 874 914 941 981 1010 1050 1145 1185 24” Open Arm Center Guest Unit, Mesh Back SOL2-CGM24OPU Urethane 590 611 SOL2-CGM24OPW Beech 630 651 632 672 674 714 716 756 758 798 800 840 842 882 907 947 24” Open Arm Center Guest Unit, Upholstered Back SOL2-CGU24OPU Urethane 621 655 689 SOL2-CGU24OPW Beech 661 695 729 756 796 824 864 892 932 960 1000 1027 1067 1163 1203 Arm Type COM 1 2 FABRIC GRADES 5 6 PRODUCT CODE KEY Line Series SOL 2 Solis Chair Chair Type SG Start Unit Guest Multiple Seating CG Center Unit Guest Multiple Seating EG Back Type Size U 21 Upholstered Back M Arm Type OPS Open Arm -Wood Arm 24 Mesh Back 21” & 24” Only OPU Open Arm Urethane Arm 30 End Unit Guest Multiple Seating CLS Closed Arm - Wood Arm 44 ORDERING NOTES: Please refer to page 20 for available options. Maple Arm are available for an upcharge on beech pricing of $50 list per arm. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLU Closed Arm Urethane Arm COW Closed Start Arm/Open Center Arm Wood Arm COU Closed Arm / Open Center Arm Urethane Arm SOLIS | 22 SOLIS | MULTIPLE SEATING - CENTER & END GUEST UNITS COL 3 4 7 LEATHER 8 30” Open Arm Center Guest Unit, Upholstered Back SOL2-CGU30OPU Urethane 726 778 SOL2-CGU30OPW Beech 766 818 9 831 871 938 978 1043 1083 1149 1189 1255 1295 1360 1400 1572 1612 44” Open Arm Center Guest Unit, Upholstered Back SOL2-CGU44OPU Urethane 848 902 SOL2-CGU44OPW Beech 888 942 954 994 1060 1100 1166 1206 1271 1311 1378 1418 1483 1523 1695 1735 21” Open Arm End Guest Unit, Mesh Back SOL2-EGM21OPU Urethane 574 SOL2-EGM21OPW Beech 614 595 635 616 656 658 698 700 740 742 782 784 824 826 866 891 931 21” Open Arm End Guest Unit, Upholstered Back SOL2-EGU21OPU Urethane 603 637 SOL2-EGU21OPW Beech 643 677 671 711 739 779 807 847 874 914 941 981 1010 1050 1145 1185 24” Open Arm End Guest Unit, Mesh Back SOL2-EGM24OPU Urethane 590 SOL2-EGM24OPW Beech 630 611 651 632 672 674 714 716 756 758 798 800 840 842 882 907 947 24” Open Arm End Guest Unit, Upholstered Back SOL2-EGU24OPU Urethane 621 655 689 756 824 892 960 1027 1163 SOL2-EGU24OPW Beech 695 729 796 864 932 1000 1067 1203 30” Open Arm End Guest Unit, Upholstered Back SOL2-EGU30OPU Urethane 726 778 SOL2-EGU30OPW Beech 766 818 831 871 938 978 1043 1083 1149 1189 1255 1295 1360 1400 1572 1612 44” Open Arm End Guest Unit, Upholstered Back SOL2-EGU44OPU Urethane 848 902 SOL2-EGU44OPW Beech 888 942 954 994 1060 1100 1166 1206 1271 1311 1378 1418 1483 1523 1695 1735 DESCRIPTION/MODEL END Arm Type COM 1 661 2 FABRIC GRADES 5 6 ORDERING NOTES: Please refer to page 20. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. PRODUCT CODE KEY Line Series SOL 2 Solis Chair Chair Type SG Start Unit Guest Multiple Seating CG Center Unit Guest Multiple Seating EG Back Type Size U 21 Upholstered Back M Arm Type OPW Open Arm -Wood Arm 24 OPU Open Arm Urethane Arm 30 CLW Closed Arm - Wood Arm Mesh Back 21” & 24” Only End Unit Guest Multiple Seating 44 CLU Closed Arm Urethane Arm 23 | SOLIS SOLIS | PRE-CONFIGURED FREE SPAN MULTIPLE SEATING GUEST UNIT WITHOUT CENTER ARM DESCRIPTION/MODEL Arm Type COM 1 2 COL 3 4 FABRIC GRADES 5 6 21” Pre-Configured Free Span Guest Unit - Open Arm 2 Seater, Mesh Back SOL2-PCFGM21X2AOPU Urethane 1143 1173 1203 1263 SOL2-PCFGM21X2AOPW Beech 1223 1253 1283 1343 7 LEATHER 8 9 1323 1403 1383 1463 1443 1523 1503 1583 1593 1673 21” Pre-Configured Free Span Guest Unit - Open Arm 2 Seater, Upholstered Back SOL2-PCFGU21X2AOPU Urethane 1203 1270 1338 1473 1608 SOL2-PCFGU21X2AOPW Beech 1283 1350 1418 1553 1688 1744 1824 1879 1959 2015 2095 2286 2366 21” Pre-Configured Free Span Guest Unit - Open Arm 3 Seater, Mesh Back SOL2-PCFGM21X3AOPU Urethane 1598 1643 1688 1778 SOL2-PCFGM21X3AOPW Beech 1678 1723 1768 1858 1868 1948 1958 2038 2048 2128 2138 2218 2273 2353 21” Pre-Configured Free Span Guest Unit - Open Arm 3 Seater, Upholstered Back SOL2-PCFGU21X3AOPU Urethane 1682 1783 1885 2088 2290 SOL2-PCFGU21X3AOPW Beech 1762 1863 1965 2168 2370 2494 2574 2697 2777 2900 2980 3307 3387 24” Pre-Configured Free Span Guest Unit - Open Arm 2 Seater, Mesh Back SOL2-PCFGM24X2AOPU Urethane 1169 1199 1229 1289 SOL2-PCFGM24X2AOPW Beech 1249 1279 1309 1369 1349 1429 1409 1489 1469 1549 1529 1609 1619 1699 24” Pre-Configured Free Span Guest Unit - Open Arm 2 Seater, Upholstered Back SOL2-PCFGU24X2AOPU Urethane 1229 1297 1364 1500 1636 SOL2-PCFGU24X2AOPW Beech 1309 1377 1444 1580 1716 1771 1851 1907 1987 2042 2122 2313 2393 24” Pre-Configured Free Span Guest Unit - Open Arm 3 Seater, Mesh Back SOL2-PCFGM24X3AOPU Urethane 1637 1682 1727 1817 SOL2-PCFGM24X3AOPW Beech 1717 1762 1807 1897 1907 1987 1997 2077 2087 2167 2177 2257 2312 2392 24” Pre-Configured Free Span Guest Unit - Open Arm 3 Seater, Upholstered Back SOL2-PCFGU24X3AOPU Urethane 1721 1823 1925 2128 2331 SOL2-PCFGU24X3AOPW Beech 1801 1903 2005 2208 2411 2535 2615 2738 2818 2940 3020 3347 3427 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Pre-configured Free Span chairs (all sizes) are available with Removable Seat Covers for an upcharge of $55 list per seat. Solis Pre-configured Free Span Chairs (21”, 24”) are available with Removable Back Covers (upholstered backs only) for an upcharge of $35 list per back. Complete mesh backs (21” & 24”) can be ordered and field installed. 21” & 24” Pre-configured Free Span chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per seat. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS - please add the following up charges for closed arm panels. Fabric Grades (COM) 1 2 (COL) 3 4 5 6 2 ARMS 264 282 300 335 371 406 PRODUCT CODE KEY Line Series Chair Type 7 442 Back Type Size 21X2 SOL 2 PCFG U Solis Chair Pre-Configured Free Span Multiple Guest Unit Upholstered Back M 8 478 9 549 Unit Style A Unit with no Center Arm 21X3 Mesh Back B Unit with Center Arm 24X2 Arm Type OPW Open Arm OPU Open Arm Urethane Arm CLW Closed Arm - Wood Arm 24X3 CLU Closed Arm Urethane Arm SOLIS | 24 SOLIS | PRE-CONFIGURED FREE SPAN MULTIPLE SEATING GUEST UNIT WITH CENTER ARM 7 LEATHER 8 9 1474 1594 1534 1654 1594 1714 1684 1804 21” Pre-Configured Free Span Center Arm Guest Unit - Open Arm 2 Seater, Upholstered Back SOL2-PCFGU21X2BOPU Urethane 1297 1365 1433 1568 1703 1839 SOL2-PCFGU21X2BOPW Beech 1417 1485 1553 1688 1823 1959 1974 2094 2110 2230 2381 2501 21” Pre-Configured Free Span Center Arm Guest Unit - Open Arm 3 Seater , Mesh Back SOL2-PCFGM21X3BOPU Urethane 1740 1785 1830 1920 2010 SOL2-PCFGM21X3BOPW Beech 1900 1945 1990 2080 2170 2100 2260 2190 2350 2280 2440 2415 2575 21” Pre-Configured Free Span Center Arm Guest Unit - Open Arm 3 Seater , Upholstered Back SOL2-PCFGU21X3BOPU Urethane 1831 1932 2034 2236 2440 2643 SOL2-PCFGU21X3BOPW Beech 1991 2092 2194 2396 2600 2803 2846 3006 3050 3210 3456 3616 24” Pre-Configured Free Span Center Arm Guest Unit - Open Arm 2 Seater, Mesh Back SOL2-PCFGM24X2BOPU Urethane 1259 1289 1319 1379 1439 SOL2-PCFGM24X2BOPW Beech 1379 1409 1439 1499 1559 1499 1619 1559 1679 1619 1739 1709 1829 24” Pre-Configured Free Span Center Arm Guest Unit - Open Arm 2 Seater, Upholstered Back SOL2-PCFGU24X2BOPU Urethane 1323 1392 1459 1595 1730 1866 SOL2-PCFGU24X2BOPW Beech 1443 1512 1579 1715 1850 1986 2001 2121 2137 2257 2407 2527 24” Pre-Configured Free Span Center Arm Guest Unit - Open Arm 3 Seater, Mesh Back SOL2-PCFGM24X3BOPU Urethane 1779 1824 1869 1959 2049 SOL2-PCFGM24X3BOPW Beech 1939 1984 2029 2119 2209 2139 2299 2229 2389 2319 2479 2454 2614 24” Pre-Configured Free Span Center Arm Guest Unit - Open Arm 3 Seater, Upholstered Back SOL2-PCFGU24X3BOPU Urethane 1871 1972 2074 2277 2480 2684 SOL2-PCFGU24X3BOPW Beech 2031 2132 2234 2437 2640 2844 2886 3046 3089 3249 3496 3656 DESCRIPTION/MODEL Arm Type COM 1 2 COL 3 4 FABRIC GRADES 5 6 21” Pre-Configured Free Span Center Arm Guest Unit - Open Arm 2 Seater, Mesh Back SOL2-PCFGM21X2BOPU Urethane 1234 1264 1294 1354 1414 SOL2-PCFGM21X2BOPW Beech 1354 1384 1414 1474 1534 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Pre-configured Free Span chairs (all sizes) are available with Removable Seat Covers for an upcharge of $55 list per seat. Solis Pre-configured Free Span chairs (21”, 24”) are available with Removable Back Covers (upholstered backs only) for an upcharge of $35 list per back. Complete mesh backs 21” & 24”) can be ordered and field replaced. 21” & 24” Pre-configured Free Span chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per seat. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 ist per seat, please see page 11 for color selection and ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS - please add the following up charges for closed arm panels. Fabric Grades (COM) 1 2 (COL) 3 4 5 6 3 ARMS 396 423 449 503 556 610 4 ARMS 528 563 599 670 742 813 7 663 844 PRODUCT CODE KEY Line Series Back Type Size 21X2 Chair Type SOL 2 PCFG U Solis Chair Pre-Configured Free Span Multiple Guest Unit Upholstered Back M 21X3 Mesh Back 24X2 8 717 955 9 824 1098 Unit Style Arm Type A OPW Unit with no Center Arm Open Arm- Wood Arm B OPU Unit with Center Arm Open Arm Urethane Arm CLW Closed Arm - Wood Arm 24X3 25 | SOLIS CLU Closed Arm Urethane Arm SOLIS | MULTIPLE SEATING - PATIENT BACKS DIMENSIONS & COM. REQUIREMENTS - PRE-CONFIGURED UNITS MESH BACK PCPM21X2 PCPM21X3 PCPM24X2 PCPM24X3 Overall Overall Overall Seat Width Depth Height Height Height of Arms from Floor Width Between Arms Seat Depth Shipping Weight Cube COM. Seat & Back Yardage COM Fabric Seat Yardage COM. Fabric Back Yardage COM. Fabric Closed Arm Panel Yardage 47 69.5 53 78.5 28 28 28 28 43.75 43.75 43.75 43.75 18.5 18.5 18.5 18.5 26 26 26 26 20 20 23 23 20 20 20 20 92 129 98 138 38 56 43 46 - 1.3 2.1 1.3 2.1 - 1.2 1.6 1.2 1.6 UPHOLSTERED BACK PCPU21X2 47 28 PCPU21X3 69.5 28 PCPU24X2 53 28 PCPU24X3 78.5 28 43.75 43.75 43.75 43.75 18.5 18.5 18.5 18.5 26 26 26 26 20 20 23 23 20 20 20 20 100 141 108 153 38 56 43 63 4.0 6.1 4.0 6.1 1.3 2.1 1.3 2.1 3.4 5.4 3.4 5.4 1.2 1.6 1.2 1.6 DIMENSIONS & COM. REQUIREMENTS - START UNITS Height of Width Overall Overall Overall Seat Arms Between Width Depth Height Height from Floor Arms MESH BACK SPM21 25 SPM24 28 Seat Shipping Depth Weight COM. COM. COM. COM COM. Fabric Fabric Seat & Fabric Fabric Closed Arm Closed Arm Back Seat Back Panel (1 Arm) Panel (2 Arms) Cube Yardage Yardage Yardage Yardage Yardage 28 28 43.75 43.75 18.5 18.5 26 26 20 23 20 20 42 45 21 23 - 0.9 0.9 - 0.4 0.4 0.8 0.8 UPHOLSTERED BACK SPU21 25 28 SPU24 28 28 SPU30 34 28 43.75 43.75 43.75 18.5 18.5 18.5 26 26 26 20 23 29 20 20 20 46 50 56 21 23 28 2.1 2.1 3.1 0.9 0.9 0.9 2.0 2.0 2.2 0.4 0.4 0.4 0.8 0.8 0.8 DIMENSIONS & COM. REQUIREMENTS - CENTER UNITS Overall Overall Overall Width Depth Height MESH BACK CPM21 23 CPM24 26 Seat Height Height of Arms from Floor Width Between Arms Seat Depth Shipping Weight Cube COM. COM Seat & Fabric Back Seat Yardage Yardage COM. Fabric Back Yardage COM. Fabric Closed Arm Panel Yardage 28 28 43.75 43.75 18.5 18.5 26 26 20 23 20 20 36 39 21 23 - 0.9 0.9 - 0.4 0.4 UPHOLSTERED BACK CPU21 23 28 CPU24 26 28 CPU30 32 28 43.75 43.75 43.75 18.5 18.5 18.5 26 26 26 20 23 29 20 20 20 40 44 50 21 23 28 2.1 2.1 3.1 0.9 0.9 0.9 2.0 2.0 2.2 0.4 0.4 0.4 DIMENSIONS & COM. REQUIREMENTS - END UNITS Overall Width MESH BACK EPM21 23 EPM24 26 Overall Overall Depth Height Seat Height Height of Arms from Floor Width Between Arms Seat Depth Shipping Weight Cube COM. Seat & Back Yardage COM Fabric Seat Yardage COM. COM. Fabric Fabric Back Closed Arm Yardage Panel Yardage 28 28 43.75 43.75 18.5 18.5 26 26 20 23 20 20 36 38 21 23 - 0.9 0.9 - 0.4 0.4 UPHOLSTERED BACK EPU21 23 28 EPU24 26 28 EPU30 32 28 43.75 43.75 43.75 18.5 18.5 18.5 26 26 26 20 23 29 20 20 20 40 44 50 21 23 28 2.1 2.1 3.1 0.9 0.9 0.9 2.0 2.0 2.2 0.4 0.4 0.4 ORDERING NOTES: Multiple yardage requirements for Patient back Start, Centre and End units, please refer to page 16. SOLIS | 26 SOLIS | MULTIPLE SEATING - PATIENT BACKS DIMENSIONS & COM. REQUIREMENTS - FREE SPAN WITH NO CENTER ARM Overall Overall Overall Width Depth Height MESH BACK PCFPM21X2A PCFPM21X3A PCFPM24X2A PCFPM24X3A 46.5 68 52.25 77 UPHOLSTERED BACK PCFPU21X2A 46.5 PCFPU21X3A 68 PCFPU24X2A 52.25 PCFPU24X3A 77 Height of Seat Arms Height from Floor Width Between Seat Arms Depth Shipping Weight COM. COM Seat & Fabric Back Seat Cube Yardage Yardage COM. Fabric Back Yardage COM. Fabric Closed Arm Panel Yardage 28 28 28 28 43.75 43.75 43.75 43.75 18.5 18.5 18.5 18.5 26 26 26 26 41.5 63 47.5 72 20 20 20 20 87 118 94 128 38 56 43 63 - 1.3 2.1 1.3 2.1 - 0.8 0.8 0.8 0.8 28 28 28 28 43.75 43.75 43.75 43.75 18.5 18.5 18.5 18.5 26 26 26 26 41.5 63 47.5 72 20 20 20 20 95 129 103 141 38 56 43 63 4.0 6.1 4.0 6.1 1.3 2.1 1.3 2.1 3.4 5.4 3.4 5.4 0.8 0.8 0.8 0.8 DIMENSIONS & COM. REQUIREMENTS - FREE SPAN WITH CENTER ARM Overall Overall Overall Width Depth Height MESH BACK PCFPM21X2B PCFPM21X3B PCFPM24X2B PCFPM24X3B 47.25 69.5 53.25 78.5 UPHOLSTERED BACK3.4 PCFPU21X2B 47.25 PCFPU21X3B 69.5 PCFPU24X2B 53.25 PCFPU24X3B 78.5 PCFP21X2B PCFP21X3B PCFP24X2B PCFP24X3B Seat Height Height of Arms from Floor Width Between Arms Seat Depth Shipping Weight Cube COM. Seat & Back Yardage COM Fabric Seat Yardage COM. Fabric Back Yardage 28 28 28 28 43.75 43.75 43.75 43.75 18.5 18.5 18.5 18.5 26 26 26 26 20 20 23 23 20 20 20 20 96 134 102 144 38 56 43 63 - 1.3 2.1 1.3 2.1 - 28 28 28 28 43.75 43.75 43.75 43.75 18.5 18.5 18.5 18.5 26 26 26 26 20 20 23 23 20 20 20 20 103 145 111 157 38 56 43 63 4.0 6.1 4.0 6.1 1.3 2.1 1.3 2.1 3.4 5.4 3.4 5.4 COM. Fabric Closed Arm Panels ( 2 Arms) COM Fabric Closed Arm Panels ( 3 Arms) 0.8 0.8 0.8 0.8 1.2 COM. Fabric Closed Arm Panels ( 4 Arms) 1.6 1.2 1.6 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Multiple Patient chairs (al sizes) are available with Removable Seat Covers for an upcharge of $55 list per seat. Solis Multiple Patient chairs (21”, 24”) are available with Removable Back Covers (upholstered backs only) for an upcharge of $35 list per back. Complete mesh backs (21” & 24”) can be ordered and field replaced. 30” models are also available with Removable Back Covers for $55 list per back. 21” & 24” Patient chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per chair. 30” Bariatric models are available with a Cleanable Under-Seat Splashguard for an upcharge of $30 list per chair. 44” Bariatric models are available with a Cleanable Under-Seat Splashguard for an upcharge of $40 list per chair. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS - please add the following list upcharges for closed arm panels. Fabric Grades 1 2 3 4 ARM ARMS ARMS ARMS 27 | SOLIS (COM) 1 2 (COL) 3 4 5 6 7 8 9 132 264 396 528 141 282 423 563 150 300 449 599 168 335 503 670 185 371 556 742 203 406 610 813 221 442 663 844 239 478 717 955 275 549 824 1098 SOLIS | MULTIPLE SEATING - PRE-CONFIGURED PATIENT UNITS DESCRIPTION/MODEL Arm Type COM 1 COL 3 2 4 FABRIC GRADES 5 6 7 LEATHER 8 9 2 Seat - 21” Open Arm Pre-configured Patient Unit, Mesh Back SOL2-PCPM21X2OPU Urethane 1330 1372 1414 SOL2-PCPM21X2OPW Beech 1450 1492 1534 1498 1618 1582 1702 1666 1786 1750 1870 1834 1954 1964 2084 2 Seat - 21” Open Arm Pre-configured Patient Unit, Upholstered Back SOL2-PCPU21X2OPU Urethane 1398 1483 1568 SOL2-PCPU21X2OPW Beech 1518 1603 1688 1737 1856 1907 2027 2076 2196 2245 2365 2414 2534 2753 2873 3 Seat - 21” Open Arm Pre-configured Patient Unit, Mesh Back SOL2-PCPM21X3OPU Urethane 1926 1989 2052 SOL2-PCPM21X3OPW Beech 2086 2249 2212 2178 2338 2304 2464 2430 2590 2556 2716 2682 2842 2877 3037 3 Seat - 21” Open Arm Pre-configured Patient Unit, Upholstered Back SOL2-PCPU21X3OPU Urethane 2025 2155 2284 SOL2-PCPU21X3OPW Beech 2185 2315 2444 2542 2702 2800 2960 3075 3235 3316 3476 3575 3735 4091 4251 24” Open Arm Urethane Cap Pre-configured Patient Unit, Mesh Back SOL2-PCPM24X2OPU Urethane 1348 1390 1432 SOL2-PCPM24X2OPW Beech 1468 1510 1552 1516 1636 1600 1720 1684 1804 1768 1888 1852 1972 1982 2102 2 Seat - 24” Open Arm Pre-configured Patient Unit, Upholstered Back SOL2-PCPU24X2OPU Urethane 1417 1502 1587 SOL2-PCPU24X2OPW Beech 1537 1622 1707 1757 1877 1926 2046 2095 2215 2264 2384 2434 2554 2772 2892 3 Seat - 24” Open Arm Pre-configured Patient Unit, Mesh Back SOL2-PCPM24X3OPU Urethane 1962 2025 2088 SOL2-PCPM24X3OPW Beech 2122 2185 2248 2214 2374 2340 2500 2466 2626 2592 2752 2718 2878 2913 3073 3 Seat - 24” Open Arm Pre-configured Patient Unit, Upholstered Back SOL2-PCPU24X3OPU Urethane 2062 2192 2321 SOL2-PCPU24X3OPW Beech 2222 2352 2481 2579 2739 2838 2998 3095 3255 3354 3514 3612 3772 4129 4289 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Pre-configured chairs (all sizes) are available with Removable Seat Covers for an upcharge of $55 list per chair. Solis Pre-configured chairs (21”, 24”) are available with Removable Back Covers (upholstered backs only) for an upcharge of $35 list per back. Complete mesh backs (21” & 24”) can be ordered and field replaced. 21” & 24” Pre-configured chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per seat. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard.. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS - please add the following up charges for closed arm panels. Fabric Grades 3 ARMS 4 ARMS (COM) 1 2 (COL) 3 4 396 528 423 563 449 599 503 670 5 6 7 8 9 556 742 610 813 663 844 717 955 824 1098 PRODUCT CODE KEY Line Series Chair Type Back Type Size 21X2 SOL 2 PCP U Solis Chair Pre-configured Patient Multiple Unit Upholstered Back M Mesh Back Arm Type OPW Open Arm - Wood Arm 21X3 24X2 OPU Open Arm Urethane Arm CLW Closed Arm - Wood Arm 24X3 CLU Closed Arm Urethane Arm SOLIS | 28 SOLIS | MULTIPLE SEATING - PATIENT START & CENTER UNITS Arm Type DESCRIPTION/MODEL START CENTER COM 1 COL 3 2 4 FABRIC GRADES 5 6 7 LEATHER 8 9 21” Open Arm Start Patient Unit, Mesh Back SOL2-SPM21OPU Urethane 699 720 SOL2-SPM21OPW Beech 779 800 741 821 783 863 825 905 867 947 909 989 951 1031 1016 1096 21” Open Arm Start Patient Unit, Upholstered Back SOL2-SPU21OPU Urethane 735 779 SOL2-SPU21OPW Beech 815 859 824 904 913 993 1001 1081 1091 1171 1179 1259 1268 1348 1446 1526 24” Open Arm Start Patient Unit, Mesh Back SOL2-SPM24OPU Urethane 724 745 SOL2-SPM24OPW Beech 804 825 766 846 808 888 850 930 892 972 934 1014 976 1056 1041 1121 24” Open Arm Start Patient Unit, Upholstered Back SOL2-SPU24OPU Urethane 761 806 SOL2-SPU24OPW Beech 841 886 850 930 939 1019 1028 1108 1116 1196 1206 1286 1295 1375 1473 1553 30” Open Arm Start Patient Unit, Upholstered Back SOL2-SPU30OPU Urethane 945 1011 SOL2-SPU30OPW Beech 1025 1091 1076 1156 1207 1287 1339 1419 1470 1550 1601 1681 1732 1812 1995 2075 21” Open Arm Center Patient Unit, Mesh Back SOL2-CPM21OPU Urethane 634 655 SOL2-CPM21OPW Beech 674 695 676 716 718 758 760 800 802 842 844 884 886 926 951 991 21” Open Arm Center Patient Unit, Upholstered Back SOL2-CPU21OPU Urethane 666 711 SOL2-CPU21OPW Beech 706 751 755 795 844 884 933 973 1021 1061 1111 1151 1200 1240 1378 1418 24” Open Arm Urethane Cap Center Patient Unit, Mesh Back SOL2-CPM24OPU Urethane 650 671 692 SOL2-CPM24OPW Beech 690 711 732 734 774 776 816 818 858 860 900 902 942 967 1007 24” Open Arm Center Patient Unit, Upholstered Back SOL2-CPU24OPU Urethane 683 728 SOL2-CPU24OPW Beech 723 768 772 812 862 902 950 990 1039 1079 1128 1168 1217 1257 1395 1435 30” Open Arm Center Patient Unit, Upholstered Back SOL2-CPU30OPU Urethane 856 922 SOL2-CPU30OPW Beech 896 962 987 1027 1118 1158 1249 1289 1380 1420 1512 1552 1644 1684 1906 1946 PRODUCT CODE KEY Line Series Chair Type Back Type Size Arm Type SOL Solis 2 Chair SP Start Unit Patient Multiple Seating U Upholstered Back 21 OPW Open Arm - Wood Arm M 24 CP Center Unit Patient Multiple Seating EP Mesh Back 21” & 24” Only 30 End Unit Patient Multiple Seating CLW Closed Arm - Wood Arm 44 Ordering Notes: Please refer to page 30. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. 29 | SOLIS OPU Open Arm Urethane Arm CLU Closed Arm Urethane Arm COW Closed Start Arm/Open Center Arm Wood Arm COU Closed Start Arm/Open Center Arm with Urethane Arm SOLIS | MULTIPLE SEATING - PATIENT END UNITS 2 COL 3 4 21” Open Arm End Unit, Mesh Back SOL2-EPM21OPU Urethane 634 SOL2-EPM21OPW Beech 674 655 695 676 716 718 758 21” Open Arm End Unit, Upholstered Back SOL2-EPU21OPU Urethane 666 SOL2-EPU21OPW Beech 706 711 751 755 795 24” Open Arm Urethane Cap End Unit, Mesh Back SOL2-EPM24OPU Urethane 650 671 SOL2-EPM24OPW Beech 690 711 24” Open Arm End Unit, Upholstered Back SOL2-EPU24OPU Urethane 683 SOL2-EPU24OPW Beech 723 30” Open Arm End Unit, Upholstered Back SOL2-EPU30OPU Urethane 856 SOL2-EPU30OPW Beech 896 DESCRIPTION/MODEL END Arm Type COM 1 FABRIC GRADES 5 LEATHER 8 6 7 9 760 800 802 842 844 884 886 926 951 991 844 884 933 973 1021 1061 1111 1151 1200 1240 1378 1418 692 732 734 774 776 816 818 858 860 900 902 942 967 1007 728 768 772 812 862 902 950 990 1039 1079 1128 1168 1217 1257 1395 1435 922 962 987 1027 1118 1158 1249 1289 1380 1420 1512 1552 1644 1684 1906 1946 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Patient Multiple chairs (all sizes) are available with Removable Seat Covers for an upcharge of $55 list per seat. Solis Patient Mutliple chairs (21”, 24”) are available with Removable Back Covers (upholstered back only) for an upcharge of $35 list per chair. Complete mesh backs (21” & 24”) can be ordered and field replaced. 30” model is also available with Removable Back Covers for $55 list per chair. 21” & 24” Guest chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per chair. 30” Bariatric models are available with a Cleanable Under-Seat Splashguard for an upcharge of $30 list per chair. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS - please add the following up charges for closed arm panels. Fabric Grades (COM) 1 2 (COL) 3 4 5 6 1 ARM 132 141 150 168 185 203 2 ARMS 264 282 300 335 371 406 7 221 442 8 239 478 9 275 549 PRODUCT CODE KEY Line Series Chair Type Back Type Size Arm Type SOL 2 21 Chair SP Start Unit Patient Multiple Seating U Solis Upholstered Back OPW Open Arm - Wood Arm CP M Center Unit Patient Multiple Seating Mesh Back 21” & 24” Only EP End Unit Patient Multiple Seating 24 OPU Open Arm Urethane Arm 30 CLW Closed Arm - Wood Arm CLU Closed Arm Urethane Arm SOLIS | 30 SOLIS | PRE-CONFIGURED FREE SPAN MULTIPLE SEATING PATIENT UNIT WITHOUT CENTER ARM DESCRIPTION/MODEL Species COM 1 2 COL 3 FABRIC GRADES 5 6 4 21” Pre-Configured Free Span Patient Unit - Open Arm 2 Seater, Mesh Back SOL2-PCFPM21X2AOPU Urethane 1263 1293 1323 1383 SOL2-PCFPM21X2AOPW Beech 1343 1373 1403 1463 7 LEATHER 8 9 1443 1523 1503 1583 1563 1643 1623 1703 1713 1793 21” Pre-Configured Free Span Patient Unit - Open Arm 2 Seater, Upholstered Back SOL2-PCFPU21X2AOPU Urethane 1328 1416 1506 1683 1861 SOL2-PCFPU21X2AOPW Beech 1408 1496 1586 1763 1941 2039 2119 2217 2297 2395 2475 2750 2830 21” Pre-Configured Free Span Patient Unit - Open Arm 3 Seater, Mesh Back SOL2-PCFPM21X3AOPU Urethane 1777 1822 1867 1957 SOL2-PCFPM21X3AOPW Beech 1857 1902 1947 2037 2047 2127 2137 2217 2227 2307 2317 2397 2452 2532 21” Pre-Configured Free Span Patient Unit - Open Arm 3 Seater, Upholstered Back SOL2-PCFPU21X3AOPU Urethane 1870 2004 2137 2404 2670 SOL2-PCFPU21X3AOPW Beech 1950 2084 2217 2484 2750 2936 3016 3203 3283 3470 3550 4003 4083 24” Pre-Configured Free Span Patient Unit - Open Arm 2 Seater, Mesh Back SOL2-PCFPM24X2AOPU Urethane 1287 1317 1347 1407 SOL2-PCFPM24X2AOPW Beech 1367 1397 1427 1487 1527 1607 1587 1667 1647 1727 1737 1817 24” Pre-Configured Free Span Patient Unit - Open Arm Urethane Cap 2 Seater, Upholstered Back SOL2-PCFPU24X2AOPU Urethane 1354 1443 1532 1710 1888 2065 SOL2-PCFPU24X2AOPW Beech 1434 1523 1612 1790 1968 2145 2243 2323 2421 2501 2777 2857 24” Pre-Configured Free Span Patient Unit - Open Arm 3 Seater, Mesh Back SOL2-PCFPM24X3AOPU Urethane 1815 1860 1905 1995 SOL2-PCFPM24X3AOPW Beech 1895 1940 1985 2075 2265 2345 2355 3435 2490 2570 1467 1547 2085 2165 2175 2255 24” Pre-Configured Free Span Patient Unit - Open Arm 3 Seater, Upholstered Back SOL2-PCFPU24X3AOPU Urethane 1910 2043 2176 2443 2710 2977 3243 3510 4043 SOL2-PCFPU24X3AOPW Beech 1990 2123 2256 2523 2790 3057 3323 3590 4123 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Pre-configured Free Span chairs (all sizes) are available with Removable Seat Covers for an upcharge of $55 list per seat. Solis Pre-configured Free Span chairs (21”, 24”) are available with Removable Back Covers (upholstered backs only) for an upcharge of $35 list per back. Complete mesh backs (21” & 24”) can be ordered and field replaced. 21” & 24” Pre-configured Free Span chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per seat. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS - please add the following up charges for closed arm panels. Fabric Grades (COM) 1 2 (COL) 3 4 5 6 7 8 9 2 ARMS 442 478 549 264 282 300 335 371 406 PRODUCT CODE KEY Line Series Chair Type Back Type Size 21X2 SOL 2 PCFP U Solis Chair Pre-configured Free Span Multiple Patient Unit Upholstered Back M 21X3 Mesh Back 24X2 Unit Style Arm Type A OPW Unit with no Center Arm Open Arm - Wood Arm B OPU Unit with Center Arm Open Arm Urethane Arm CLW Closed Arm -Wood Arm 24X3 CLU Closed Arm Urethane Arm 31 | SOLIS SOLIS | PRE-CONFIGURED FREE SPAN MULTIPLE SEATING PATIENT UNIT WITH CENTER ARM 7 LEATHER 8 9 1593 1713 1653 1773 1713 1833 1803 1923 21” Pre-Configured Free Span Center Arm Patient Unit - Open Arm 2 Seater, Upholstered Back SOL2-PCFPU21X2BOPU Urethane 1423 1511 1601 1778 1956 2134 SOL2-PCFPU21X2BOPW Beech 1543 1631 1721 1898 2076 2254 2311 2431 2490 2610 2845 2965 21” Pre-Configured Free Span Center Arm Patient Unit - Open Arm 3 Seater, Mesh Back SOL2-PCFPM21X3BOPU Urethane 1920 1965 2010 2100 2190 SOL2-PCFPM21X3BOPW Beech 2080 2125 2170 2260 2350 2280 2440 2370 2530 2460 2620 2595 2755 21” Pre-Configured Free Span Center Arm Patient Unit - Open Arm 3 Seater, Upholstered Back SOL2-PCFPU21X3BOPU Urethane 2019 2153 2286 2553 2819 3086 SOL2-PCFPU21X3BOPW Beech 2179 2313 2446 2713 2979 3246 3353 3513 3620 3780 4152 4312 24” Pre-Configured Free Span Center Arm Patient Unit - Open Arm 2 Seater, Mesh Back SOL2-PCFPM24X2BOPU Urethane 1378 1408 1438 1498 1558 SOL2-PCFPM24X2BOPW Beech 1498 1528 1558 1618 1678 1618 1738 1678 1798 1738 1858 1828 1948 24” Pre-Configured Free Span Center Arm Patient Unit - Open Arm 2 Seater, Upholstered Back SOL2-PCFPU24X2BOPU Urethane 1449 1538 1627 1805 1983 2160 SOL2-PCFPU24X2BOPW Beech 1569 1658 1747 1925 2103 2280 2339 2459 2517 2637 2872 2992 24” Pre-Configured Free Span Center Arm Patient Unit - Open Arm 3 Seater, Mesh Back SOL2-PCFPM24X3BOPU Urethane 1958 2003 2048 2138 2228 SOL2-PCFPM24X3BOPW Beech 2118 2163 2208 2298 2388 2408 2568 2498 2658 2633 2793 DESCRIPTION/MODEL Species COM 1 COL 3 2 4 FABRIC GRADES 5 6 21” Pre-Configured Free Span Center Arm Patient Unit - Open Arm 2 Seater, Mesh Back SOL2-PCFPM21X2BOPU Urethane 1353 1383 1413 1473 1533 SOL2-PCFPM21X2BOPW Beech 1473 1503 1533 1593 1653 2318 2478 24” Pre-Configured Free Span Center Arm Patient Unit - Open Arm 3 Seater, Upholstered Back SOL2-PCFPU24X3BOPU Urethane 2060 2193 2326 2593 2860 3126 3392 3659 4192 SOL2-PCFPU24X3BOPW Beech 2220 2353 2486 2753 3020 3286 3552 3819 4352 ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $20 list per unit and $40 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote. Solis Pre-configured Free Span chairs (all sizes) are available with Removable Seat Covers for an upcharge of $55 list per seat. Solis Pre-configured Free Span chairs (21”, 24”) are available with Removable Back Covers (upholstered back only) for an upcharge of $35 list per back. Complete mesh backs (21” & 24”) can be ordered and field replaced. 21” & 24” Pre-configured Free Span chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $25 list per seat. CAL 133 and Moisture Barriers are available for an upcharge of $40 list per yard. Maple Arms are available for an upcharge on beech pricing of $50 list per arm. Wood Side Rails are available for an upcharge of $80 list per chair in Beech or $100 list in Maple. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an upcharge of $40 list per seat, please see page 11 for color selection and required ordering quantities. Silver metallic frames are available with an anti-microbial finish for an upcharge of $40 list per chair or table. CLOSED ARM PANELS - please add the following up charges for closed arm panels. Fabric Grades (COM) 1 2 (COL) 3 4 5 6 3 ARMS 396 423 449 503 556 610 4 ARMS 528 563 599 670 742 813 PRODUCT CODE KEY Line Series Chair Type 7 663 844 Back Type Size 21X2 SOL 2 PCFP U Solis Chair Pre-configured Free Span Multiple Patient Unit Upholstered Back M Mesh Back 8 717 955 9 824 1098 Unit Style Arm Type A OPW Open Arm - Wood Arm Unit with no Center Arm 21X3 24X2 B Unit with Center Arm OPU Open Arm Urethane Arm CLW Closed Arm -Wood Arm 24X3 CLU Closed Arm Urethane Arm SOLIS | 32 SOLIS | LINKING TABLES FEATURES ANTI-MICROBIAL FINISH - WOOD TOPS Solis wood products come with a uniquelyformulated anti-microbial finish that inhibits the growth of molds and mildews. Surfaces coated in this finish will have reduced fungal growth, and spores from germs, microbes and bacteria will not multiply on the wood. WOOD SPECIES Solid Beech & Maple edges with Veneer tops. STANDARD FINISHES For a complete list of standard wood finishes, please see page 4. Solis tables are available in 22 standard finishes. ANTI-MICROBIAL FINISH - FRAME Solis Sliver Metallic legs are available with an antimicrobial finish for an upcharge of $40 list per table. The anti-microbial finish is included in the upcharge when ordering the 7 additional frame finishes. LAMINATE AND POLYMER EDGE Solis tables are available in laminates with wood or laminates with Polymer edge. See page 11 for laminate information. FRAME COLORS AVAILABLE: The standard Solis Leg finish is Silver Metallic. Additional Frame Colors are available for an upcharge of $40 list per table. Please see page 11 for color selection and required ordering quantities. ORDERING NOTES: Linking tables can be ordered in conjunction with any of the Krug Solis Multiple Seating. Linking tables are connected to the Multiple Seating via U-Shaped brackets. The design of the tables for Solis Multiple Seating allows for any table to be very easily added or moved to a new position within the configuration - or completely replaced - after the product has been first installed. The attachment of the tables is designed so that they can be readily be taken out of the configuration without any defacing of the adjoining seat frames. Linking tables also feature a universal, non-handed design: They can be moved to reverse position in almost every configuration, providing a high level of flexibility for reconfiguring. Please note Solis Plastic Laminate Linking Tables are not available on KrugExpress. Wood Tops with Wood Edges are available on KrugExpress but with a minimum order requirement of 5 tables per order. A drawing showing the configuration of the multiple seating and tables are required with each purchase order. Linked Table - End SOL4-LKE-22-22 Linked Table Center SOL4-LKI-22-22 33 | SOLIS Linked Table Corner/Radius 45 Linked Table Corner/Flat 45 Linked Table Corner/Radius 90 Linked Table Corner/Flat 90 Linked Table Corner Square Flat SOL4-LKCRR45 SOL4-LCRF45 SOL4-LKCRR90 SOL4-LKCRF90 SOL4-LKCSF90 SOLIS | LINKING TABLES DESCRIPTION/MODEL Beech Maple Laminate Laminate with Wood Edge with Polymer Edge W D Weight Cubes Center Square Table SOL4-LKI-22-22 389 409 475 374 22 22 18 1.5 End Square Table SOL4-LKE-22-22 415 437 506 401 22 22 20 1.5 461 374 27.5 27.5 21 2.2 418 484 394 27.5 27.5 21 2.2 472 547 446 30.5 30.5 27 2.2 539 439 30.5 29 29 2.2 606 467 30.5 30.5 32 2.2 o Curvilinear Connector Table 45 with flat edge SOL4-LKCRF45 378 398 o Curvilinear Connector Table 45 SOL4-LKCRR45 397 o Curvilinear Connector Table 90 SOL4-LKCRR90 448 o Curvilinear Connector Table 90 with flat edge SOL4-LKCRF90 442 466 o Rectilinear Corner Connector Table 90 SOL4-LKCSF90 497 523 ORDERING NOTES: Linking tables can be ordered in conjunction with any of the Solis Multiple Seating. Linking tables are connected to the Multiple Seating via U-Shaped brackets. o Rectilinear Corner Connector table 90 include a support leg in the outer corner. When specifying Linking Tables please ensure that each unit has legs on either side of the table. Please note Solis Plastic Laminate Linking Tables are not available on KrugExpress. Wood Tops with Wood Edges are available on KrugExpress but with a minimum order requirement of 5 tables per order. A drawing showing the configuration of the multiple seating and tables is required with each purchase order. SOLIS | 34 SOLIS | FREE STANDING TABLES ANTI-MICROBIAL FINISH Solis products come with a uniquelyformulated anti-microbial finish that inhibits the growth of molds and mildews. Surfaces coated in this finish will have reduced fungal growth, and spores from germs, microbes and bacteria will not multiply on the wood. WOOD SPECIES Solid Beech & Maple edges with Veneer tops. STANDARD FINISHES For a complete list of standard wood finishes, please see page 4. Solis tables are available in 22 standard finishes. ANTI-MICROBIAL FINISH - FRAME Solis Silver Metallic legs are available with an antimicrobial finish for an up-charge of $40 list per table. The anti-microbial finish is included in the upcharge when ordering the 7 additional frame finishes. FRAME COLORS AVAILABLE: The standard Solis Leg finish is Silver Metallic. Additional Frame Colors are available for an upcharge of $40 list per table. Please see page 11 for color selection and ordering quantities. Beech Maple Laminate with Wood Edge Square Tables SOL4-22-22-16 367 386 448 348 22 22 16 26 5 SOL4-42-22-16 512 539 625 479 42 22 16 46 9 SOL4-22-22-21 371 390 453 352 22 22 21 28 7 Circular Tables SOL4-18D-16 326 343 398 310 18 Diameter - 16 20 3 SOL4-18D-21 336 354 410 319 18 Diameter - 21 22 4 SOL4-24D-16 345 364 421 334 24 Diameter - 16 32 5 SOL4-24D-21 371 390 453 359 24 Diameter - 21 35 7 SOL4-36D-16 524 552 639 533 36 Diameter - 16 43 12 DESCRIPTION/MODEL 35 | SOLIS LAMINATE AND POLYMER EDGE Solis tables are available in laminates with wood or laminates with Polymer edge. See page 11 for laminate information. Laminate with Polymer Edge W D H Weight Cubes SOLIS | ACCESSORIES COM. 1 DESCRIPTION/MODEL 2 COL 3 4 FABRIC GRADES 5 6 LEATHER 8 7 Adjustable Headrest SOL2-HRM 110 120 130 145 160 175 190 205 SOL2-HRU 110 120 130 145 160 175 190 205 Adjustable headrest are one size and can be used on all Patient Chair models. 9 W D H Weight Cubes 15 3 6.75 3 0.9 235 235 PRODUCT CODE KEY Line Series Item U HR SOL 2 Solis Chair Fabric Yardage Required: 1 headrest = 0.3 yards 2 headrest = 0.6 yards 3 headrest = 0.6 yards Back Type Adjustable Headrest Upholstered Back M Mesh Back COM. 1 DESCRIPTION/MODEL 2 COL 3 Easy Clean Backrest Cover, Mesh Back SOL2-BCM21 76 84 90 SOL2-BCM24 76 84 90 4 FABRIC GRADES 5 6 LEATHER 8 7 9 W D H Weight Cubes 104 104 118 118 134 134 148 148 160 160 178 178 20 23 0.5 0.5 8 8 3 3 0.9 0.9 Easy Clean Backrest Cover, Upholstered Back SOL2-BCU21 76 84 90 104 SOL2-BCU24 76 84 90 104 118 118 134 134 148 148 160 160 178 178 20 23 0.5 0.5 8 8 3 3 0.9 0.9 PRODUCT CODE KEY Line Series Item Back Type Size 21 SOL 2 BC U Solis Chair Backrest Cover Upholstered Back Fabric Yardage Required: 0.3 yards per backrest 24 M Mesh Back DESCRIPTION/MODEL Ottoman SOL5 COM. 1 2 COL 3 4 FABRIC GRADES 5 6 370 385 400 430 460 489 7 519 LEATHER 8 549 9 609 W D H 18.25 18.25 13 Weight Cubes 12 5 Fabric Yardage Required: 1 ottoman = 0.7 yards 2 ottoman = 1 yards Solis Ganging Bracket SOL2-RLKBS 20 9.25 x 3.5 GANGING All Solis Guest, Patient, Free Span and Pre-configured chairs can be ganged together using a ganging bracket. The powder-coated metal plate is fastened to the underside of the steel side rails using the pre-existing holes in the frame. One ganging bracket is required per side and will be shipped installed to one of the frames. Please note: Ganging brackets are not required for multiple seating (start, center and end chairs). SOLIS | 36 Solis Guest 21” Upholstered Back/Open Arm Solis Guest 24” Upholstered Back/Open Arm Solis Guest 21” Upholstered Back/Closed Arm Solis Guest 24” Upholstered Back/Closed Arm 2 Casters Solis Guest 30” Upholstered Back/Open Arm Solis Guest 44” Upholstered Back/Open Arm Solis Guest 21” Mesh Back/Open Arm Solis Guest 24” Mesh Back/Open Arm 4 Casters Solis Guest 21” Mesh Back/Closed Arm Solis Guest 24” Mesh Back/Closed Arm Solis Guest 30” Upholstered Back/Closed Arm Solis Guest 44” Upholstered Back/Closed Arm Solis Patient 21” Upholstered Back/Open Arm Solis Patient 24” Upholstered Back/Open Arm Solis Patient 21” Upholstered Back/Closed Arm Solis Patient 24” Upholstered Back/Closed Arm 4 Casters Solis Patient 30” Upholstered Back/Open Arm Solis Patient 21” Mesh Back/Open Arm Solis Patient 24” Mesh Back/Open Arm Solis Patient 21” Mesh Back/Closed Arm Solis Patient 24” Mesh Back/Closed Arm Solis Patient 30” Upholstered Back/Closed Arm Solis Guest 21” Upholstered Back Center Unit Solis Guest 21” Upholstered Back End Unit Solis Guest 24” Upholstered Back Start Unit Solis Guest 24” Upholstered Back Center Unit Solis Guest 24” Upholstered Back End Unit Solis Guest 21” Pre-Configured Upholstered Back 2 Seater Free Span Unit Solis Guest 30” Upholstered Back Start Unit Solis Guest 30” Upholstered Back Center Unit Solis Guest 30” Upholstered Back End Unit Solis Guest 44” Upholstered Back Start Unit Solis Guest 44” Upholstered Back Center Unit Solis Guest 44” Upholstered Back End Unit Solis Guest 21” Upholstered Back Easy Access Solis Patient 21” Upholstered Back Easy Access Solis Patient 21” Upholstered Back Start Unit Solis Patient 21” Upholstered Back Center Unit Solis Patient 21” Upholstered Back End Unit Solis Patient 24” Upholstered Back Start Unit Solis Patient 24” Upholstered Back Center Unit Solis Patient 24” Upholstered Back End Unit Solis Patient 30” Upholstered Back Start Unit Solis Patient 30” Upholstered Back Center Unit Solis 22W 22D 16H Square Table Solis 22W 22D 21H Square Table Solis 42W 22D 16H Rectangular Table Solis 18Diam. 16H Round Table Solis 18Diam. 21H Round Table Solis 24Diam. 21H Round Table Solis 36Diam. 16H Round Table Solis 45 Degree Connector Table Solis 90 Degree Connector Table Solis 22W 22D Center Square Connector Table Printed in Canada PCSOL1101 2011 Solis Guest 21” Upholstered Back Start Unit Solis 30W 30D Corner Connector Table Solis 22W 22D End Square Connector Table [email protected] | www.krug.ca | 1.888.578.KRUG Solis Guest 21” Pre-Configured Mesh Back 3 Seater Free Span Unit Solis Patient 30” Upholstered Back End Unit