Transcript
SONICWAVE Acoustics Series
Wireless Car Hi-Fi Stereo Receiver Acoustics Hi-Fi audio output. Built-in SONICWAVE EQ professional equalizer, able to enhance the mega bass of cellphone and Car audio, as well as the sense of separation of vocal effect and stereo, to directly sublimate the Bluetooth lossless Audio to the professional acoustics.
Car power supply noise isolation. Built-in advanced power supply isolation circuit, 100% solving the problem of noise interference of vehicle power supply.
With Directional microphone, effectively reducing the interference echo in Calling. Made in Taiwan. Product Specifications ◎ Communication Specifications: ● Communication mode: Bluetooth standard specifications of Ver.3.0+EDR ● Output power: Bluetooth standard specifications of Power Class 2 ● Farthest communication distance: Within 10m in good sight condition ● Using frequency range: 2.4GHz (2.402GHz～2.480GHz) ● Frequency modulation: FHSS ● Supports Bluetooth protocol: A2DP, HFP, HSP ● Supports encoding: SBC, atpX ● Supports content protection: SCMS-T ● Transmission frequency 20～20,000Hz (in sampling frequency of 44.1kHz)
◎ Body Part: ● Microphone type: External φ3.5mm socket * 1 ● Microphone sensitivity: -67±4dB (finished product ,0dB=1V/Pa,1KHz) ● Microphone response frequency: 100Hz～10kHz ● Maximum output power:0.75Vrms (T.H.D <0.1%) ,SNR93dB ● Output terminal: φ3.5mm stereo socket ● DCV Power source: From Car (USB 5V) ● Size: W20×H76×D10mm ● Weight: 20g ● Operating temperature range: 0°C～70°C ● Accessories: φ3.5mm signal line * 1, USB adaptor *1, External MIC *1
Wireless Car Hi-Fi Stereo Receiver Manual Accessories Overview 1. Stereo connector: (Line-out) insert the stereo cable to connect the device to the stereo. 2. Microphone connector (Mic in), insert the microphone cable for hands-free mode. 3. USB adapter, into the car cigarette lighter USB port or USB port to turn on the device. 4. Notification light flashing blue light indicates that the device is visible to other Bluetooth devices, or the device is reconnected. Continuous blue light indicates that the device is connected to the phone.
5. Pair / connect, power up automatically enters pairing mode so that other Bluetooth devices can be seen in the Sonicwave-Aux1 device.
Open the Wireless Car Hi-Fi Stereo Receiver Plug the Wireless Car Hi-Fi Stereo Receiver USB into your car cigarette lighter USB port or USB port. The blue notification LEDs will blink, showing that the device is turned on. The music receiver will only work when connected to a power source.
Connect the music receiver to stereo 1. Connect one end of the cable into the stereo AUX-Wireless Car Hi-Fi Stereo Receive connector (Line out). 2. Connect the other end of the cable into the stereo AUX car stereo (AUX IN).
Pairing and connection 1. You need to first pair the Wireless Car Hi-Fi Stereo Receive with the phone; you can use Wireless Car Hi-Fi Stereo Receive to play music via the car stereo system. 2. Wireless Car Hi-Fi Stereo Receive internal memory and memory can be saved at any time with other phones paired with up to eight groups.
Music receiver manually paired with your phone 1. Make sure the Bluetooth feature is turned on. 2. Wireless Car Hi-Fi Stereo Receiver: If you it is the first time you are pairing the Wireless Car Hi-Fi Stereo Receiver with your phone, the in-Wireless Car Hi-Fi Stereo Receiver will automatically enter in pairing mode. If not, restart the power indicator (the light will flash blue) until the notification date. 3. Phone: Scan for Bluetooth devices and select Sonicwave-Aux1 in the list of available devices.
Disconnect and reconnect There are two ways you can use your phone with Wireless Car Hi-Fi Stereo Receive when it is disconnected or reconnected: 1. Pair of Bluetooth devices in the phone list deselects or selects Sonicwave-Aux1. 2. Re-Wireless Car Hi-Fi Stereo Receiver to power the pairing action.
Hands-free utilities 1. When the other calls or dials out on their own when on the phone screen to select Sonicwave-Aux1, through the car stereo speakers and a microphone to make hands-free calls.
2. Car volume will be adjusted, accordingly, in order to maintain a good call quality.
Isolated power supply noise 1. When playing music, if you hear hissing noise from the power supply, connect the power supply noise isolation switch to ON, to eliminate noise.
Company: Sonicwave Technology Co., Ltd. Address: 2F., No.181, Zhouzi St., Neihu Dist., Taipei City 114, Taiwan (R.O.C.) Tel: +886-2-26595889 ext.2118 Website: http://sonicwave.taiwantrade.com.tw/ and www.sonicwavetech.com Facebook: https://www.facebook.com/sonicwavetech
