Transcript
SONY FCB H11 / EH / SE HDSDI INTERFACE
Features
SDI and HDSDI digital video output. Analog HD and SD video output. Automatic SONY camera recognition. E nhanced signal quality : Low jitter, Sharp rising edges for long distance transmission. Video format selection by micro switches. Embedded colour bar & pathologic charts. Embedded cross reticle TTL or RS232 VISCA dialog level. 5 to 12 VDC protected and EMC filtered power supply input.
Ae w gi w s w E .a le eg ct is ron el ic ec G t.c ro om u p
>> >> >> >> >> >> >> >> >>
Connection with FCB H11
More than a video transmission module, the HDMI interface is the heart of an industrial vision OEM system.
Compact size
FCC 24 p
Highly compact, the electronic module can be fixed at the rear of all SONY FCB HD without disturbing the mechanical integration.
Perfect HDSDI Image quality
Developed in association with the Engineers of the «Gennum» manufacturer, the HDSDI output is optimized to supply a high quality signal. This is proved by high-level characteristics. The low jitter, sharp rising edges allow a digital reliable transmission with long cables.
Low power consumption
LVDS MICRO COAX 10 p
Connection with FCB EH & SE600
The board uses components that require little energy. Internal supply voltages are lowered. The intensity circulating in components is reduced in order to lower the consumption. This also reduces the radiated emission for EMC regulation. This confers on the module an EMC behavior suitable with the hardest medical and aeronautical standards.
OEM Embedded Image processing functions
The HDMI interface is based on an oversized Xilinx FPGA for a simple signal transmission application. Graphic overlay and image processing functions can be applied to the image flow in real time.
LVDS MICRO COAX 30 p
Bloc diagram LVDS
Embedded color bar & reticle SDI
8 bits + CLK
8 bits + CLK
Analog YC
CAN
Micro Controller
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone *
[email protected] * http://www.aegis-elec.com
SONY FCB H11 / FCB EH HDSDI Interface specifications H11
EH6300
DVI 1080p25, 1080p30
EH3400
EH3300
EH3150
SE 600
✓✓
✓✓ ✓✓
DVI 1080i50, 1080i60
✓✓
✓✓
DVI 720p50, 720p60
✓✓
✓✓
✓✓
✓✓
✓✓
✓✓
DVI 720p25, 720p30
✓✓
✓✓
✓✓
✓✓
✓✓
✓✓
HD Analogue Y, PbPr
✓✓
✓✓
✓✓
✓✓
✓✓
Functions
Specifications
Functions
Specifications
Digital video output
HDSDI SMPTE 292 M
Latency
LVDS input to HDSDI output : 14 microseconds
Analog video output
Y, Pb, Pr 75 ohms, 1V p to p
Power
6 to 12 VDC, 6 W (including camera) 5V for SE 600
Video output standard configuration
Micro switches
Environmental
0°C to 60°C
Camera setting
RS232 or TTL, RX, TX, SONY VISCA protocol
Storage
-20°C to 60°C
BNC (SMB, MCX available in option)
Regulation
EMC FCC part 15, PCB : UL 94 V0
Dimensions (mm)
48 (H) x 45 (L) x 20 (P)
Video output connector
SONY FCB H11 / FCB EH HDSDI Interface connection and configuration HD video and COM signal
1 2 3 4 5 6 7 8 9 10
Y GND Pb GND Pr GND RX RS232 TX RS232 GND Not Connected
1 OFF ON OFF ON OFF ON OFF ON OFF ON OFF
2 OFF OFF ON ON OFF OFF ON ON OFF OFF ON
3 OFF OFF OFF OFF ON ON ON ON OFF OFF OFF
Ae w gi w s w E .a le eg ct is ron -e ic le c. Gr co ou m p
J7
J6 1 2
J3 1 2 3 4 5
Power 6 to 12 VDC GND
Anlalog SD video output VBS out GND Y C GND LED Blinking 1 blink 2 3 4 5 6 7
Status
Firmware loading Decoder initialization OK FPGA loading OK Camera Dialog OK Video format config OK FPGA video processing OK Video format modification by switches.
4 OFF OFF OFF OFF OFF OFF OFF OFF ON ON ON
TTL / RS232 Dialog level PS 3 PS 4
FCB-H11 External
NTSC PAL
FCB-EH SERIE External 1080p30 1080p25 1080i60 1080i50 720p60 720p50 720p30 720p25 NTSC PAL
Open RS232 level RS232 level
Bypass TTL level input TTL level input
1080i59,94 1080i50 720p59,94 720p50
SONY FCB H11 / FCB EH HDSDI Interface product code
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone *
[email protected] * http://www.aegis-elec.com
3.4 RS232 / TTL mode :
Ae w gi w s w E .a le eg ct is ron -e ic le c. Gr co ou m p
Four resistors ( 0 Ohms) allow to select the serial link electronic level.
RS232 mode; the signals are converted before the camera input ( factory setting)
R29 and R31 must be soldered. (R30&R32 must be removed)
TTL mode, the signals are going directly to the SONY camera.without RS232 conversion
R30 and R32 must be soldered,( R29&R31 must be removed)
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone *
[email protected] * http://www.aegis-elec.com
