Transcript
HVL-LBPB Battery Video Light
click: sony.com/professional
SONY56928_HVL-LBPA.indd 1
3/1/11 9:49 AM
Features
High-performance LED Video Light Wide compatibility for flexible installation
HVL-LBPB
The HVL-LBPB can be attached three ways: 1. By using the standard cold accessory shoe on the camcorder. 2. By extending the screw bolt contained inside the attachment foot using the dialing screw (circled in red) the light can be easily connected to the screw hole.
LED reliability and low power consumption
3. By using another device that contains a standard screw in its attachment plate, such as a tripod or light stand, it is easy to mount the light by connecting it to the screw hole.
Bright daylight balanced output. Powered by a single InfoLITHIUM® battery (sold separately). Optimized for 16x9 aspect ratio. The HVL-LBPB is perfect for outside shooting in shade, at night and in sunlight. It is even bright enough to use for fill in very bright backlit scenes so you can be at ease shooting closeups or from forty feet away. Color balanced at 5500K daylight color temperature and comes with a filter kit to convert the color temperature from 5,500K to 3,200K. Max. 1800 lux* @ 1m. Low power usage of only 18 W. NP-F970 battery provides up to 160 min. @ max. brightness. Over 10,000 hrs. LED lifetime** allows for heavy usage. Low heat means quick cool down and pack-up. *HVL-LBPB is 3 times brighter than original model (HVL-LBPA)
2. Screw bolt
1. Cold shoe 3. Screw hole
Camcorder fitting with Light connector
* This is the time when an output of radiance value is reduced by half. (The LED tested were measured under controlled conditions. Actual LED life may vary based on different operating conditions and settings.)
L Series Battery power from NP-F770/F970 or D-Tap connector commonly available on professional camcorders. The HVL-LBPB is cost effective and convenient, using standard L Series batteries (sold separately).
12V DC Light Connector Adaptor
HVR-S270 via 12V DC Light connector
PMW-350 via 12V DC Light Connector
Use as a hand-held battery light or on top of a light stand to act as backlight. D-Tap Connector
SONY56928_HVL-LBPA.indd 2
2/24/11 11:00 AM
Ideal for Wide-angle as well as distance shooting and is optimized for 16x9 for more even illumination. The HVL-LBPB provides uniform flood-lighting over wide areas for backgrounds, and quick conversion to a focused spot-light.
Spot or flood-lighting. Combining the built-in diffuser and condensing lenses for spot and flood-lighting allows control of light angle and illuminance, for both close ups as well as up to 40 feet away. This functionality achieves softened shadows and reduces contrast in virtually all conditions. Diffuser OFF Condensing Lens OFF
Diffuser OFF Condensing Lens ON
HARD FLOOD
HARD SPOT
Diffuser OFF Condensing Lens ON Approx. 23 Degree Flood Angle
Subject
23
HARD SPOT
40 ft. Approx. 1800 lux 5500 K (with filter Approx. 1200 lux 3200 K)
Approx. 65 Degree Flood Angle
Wide-angle – 40 ft. The HVL-LBPB is designed to provide optimum flood-light dispersion for wide-angle shooting. Uniform dispersion of illumination intensity is possible across the entire scene.
Diffuser ON Condensing Lens OFF
65
Approx. 23 Degree Flood Angle
23
Approx. 360 lux 5500 K (with filter Approx. 230 lux 3200 K)
Approx. 1800 lux 5500 K (with filter Approx. 1200 lux 3200 K)
Diffuser ON Condensing Lens OFF
Diffuser ON Condensing Lens ON
SOFT FLOOD
SOFT SPOT
65
35
Approx. 250 lux 4400 K (with filter Approx. 160 lux 3000 K)
Approx. 550 lux 4400 K (with filter Approx. 350 lux 3000 K)
Subject 65
SOFT FLOOD
3 ft. Approx. 250 lux 4400 K (with filter Approx. 160 lux 3000 K)
Focused Spot – 3 ft. Using the built-in condensing lens, you can capture subjects at a distance. The attached diffuser softens shadows and reduces contrast for professional close-ups.
Filter kit The HVL-LBPB comes with a filter kit to convert color temperature 5,500K to 3,200K.
Measurement specifications: Dimmer dial set to MAX. @ 3 1/5 ft (1m) Temp. 77 ˚F (25 ˚C)
Controls and Features Battery Level Check Permits checking battery charge even when the light is turned off.
Power Dimmer Dial Allows linear brightness adjustment from Approx. 10 % - 100 %
Screw hole for tripod Screw bolt for an adaptor
SONY56928_HVL-LBPA.indd 3
Connector for cold shoe
2/24/11 11:00 AM
Dimensions
Accessories
4 3/4 (108)
Specifications
° Ap .45 pro rox x.45 App ° 7 1/2 (190)
Color temperature
Without filter: Approx. 5500 K without diffuser (when the BRIGHT dial is set to MAX at an ambient temperature of 70 °F (25 °C)) With filter: Approx. 3200 K without diffuser (when the BRIGHT dial is set to MAX at an ambient temperature of 70 °F (25 °C))
Lighting directions
Vertical approx. 65 degrees Horizontal approx. 65 degrees (without lens) approx. 23 degrees (with lens)
Continuous lighting time
Approx. 160 min (2h40m) (when using a fully charged NP-F970 and when the BRIGHT dial is set to MAX at an ambient temperature of 70 °F (25 °C)) Approx. 105 min (1h45m) (when using a fully charged NP-F770 and when the BRIGHT dial is set to MAX at an ambient temperature of 70 °F (25 °C))
Appr ox. 40 °
Approx. 3 1/5 ft. (1 m) 1800 lux Approx. 9 and 4/5 ft. (3 m) 200 lux Approx. 16 and 1/2 ft. (5 m) 72 lux Approx. 26 and 1/3 ft. (8 m) 28 lux Approx. 32 and 4/5 ft. (10 m) 18 lux
x.40° pro
LED
Lighting distance (with Lens)
Ap
Lighting device
7 3/4 (195) 4 3/8 (109)
Light
7 1/8 (180)
6 (150)
NP-F770/F970 InfoLITHIUM® Rechargeble Battery Pack
5 1/8 (129) 6 5/8 (167): Battery attached (NP-F970)
Unit: inches (mm)
General Weight
Approx. 15.9 oz (450 g)
Power requirements
DC 7.2 V InfoLITHIUM rechargeable battery pack L series NP-F970/F770 range. (cannot use NP-F500/300 range)
Power consumption
Approx. 18 W with battery (Approx. 20 W with LIGHT connector adaptor)
Operating temperature
+32 to +104 °F (0 to +40 °C)
Storage temperature
-4 to +140 °F (-20 to +60 °C)
Supplied accessories
Color conversion filter, LIGHT connector adaptor (Cord part approx. 10 in. (25 cm)), Set of printed documentation
Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656
© 2011 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. Non-metric weights and measures are approximate and may vary. Sony, the Sony logo, the Sony make.believe logo, InfoLITHIUM, and its logo are trademarks of Sony. Images in this brochure are simulated.
click: sony.com/professional
V-2476 (MK10521V1)
SONY56928_HVL-LBPA.indd 4
Printed in USA (1/11)
2/24/11 11:00 AM
