Preview only show first 10 pages with watermark. For full document please download

Spada® Ho - Beghelli Canada

   EMBED


Share

Transcript

VANDAL-RESISTANT LINEAR LED INSTALLATION INSTRUCTIONS Spada® HO SPA SERIES EACH MODEL NUMBER CONSISTS OF THE FOLLOWING: SERIES / WATTAGE / LENGTH / LED COLOUR TEMP. / INPUT SERIES: SPAHO WATTAGE / HO / 40W / 4FT LENGTH: HO / 20W / 2FT COLOUR TEMP.: 3000K / 4000K / 5000K INPUT: 120V-277V, 347V E476316 IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 1. 2. 3. 4. 5. 6. Do not let power cords touch hot surfaces. Do not mount near gas or electric heaters. Equipment should be mounted in locations and at heights where unauthorized personnel will not readily subject it to tampering. The use of accessory equipment not recommended by Beghelli, may cause an unsafe condition, and will void the warranty. Do not use this equipment for other than its intended purpose. Servicing of this equipment should be performed by qualified service personnel. THIS PRODUCT MUST BE INSTALLED BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED, IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE. SAVE THESE INSTRUCTIONS! First make sure power is turned off before starting the installation! 1. Install each mounting system as indicated. 2. Connect wires leads from main AC following wire labels. 3. Connect red (DIM+) and purple (DIM-) to 1-10V dimming system. Cap unused wires. HOT.............(BLACK) NEUTRAL.....(WHITE) DIM+..............(RED) DIM-.........(PURPLE) No user serviceable parts. Refer service to a qualified service technician. Read instructions prior to installing and/or operating this device. Installation should be performed by a licensed electrician/installer in accordance with local codes. 926000519 Beghelli Canada Inc., 3900 14th Avenue, Markham, ON L3R 4R3 Tel: (905) 948-9500 Fax: (905) 948-8673 1 SPADA® HO MOUNTING Surface/Ceiling Mounting 1. Fasten and secure mounting clips with mounting screws. 2. Fasten fixture to mounting clips as indicated. aluminum housing stainless steel mounting clips Fixture will snap in place. polycarbonate end caps polycarbonate lens MOUNTING CLIPS MOUNTING SCREWS ACCESSORIES (provided by Beghelli) (2) MOUNTING CLIPS (2) SAFETY SCREWS (4) MOUNTING SCREWS COMPLETED ASSEMBLY JUNCTION MOUNT (IP64 RATED) 926000519 2 Beghelli Canada Inc., 3900 14th Avenue, Markham, ON L3R 4R3 Tel: (905) 948-9500 Fax: (905) 948-8673 SPADA® HO MOUNTING Aircraft Cable Mounting 1. 2. 3. 4. Secure steel aircraft cables to the ceiling. Fasten and secure mounting clips to the Spada®. Secure the cable gripper to the mounting clips. Connect and secure the steel aircraft cable to the gripper and adjust length accordingly. COMPLETED ASSEMBLY 60” POWER CORD (provided by beghelli) JUNCTION MOUNT (IP64 RATED) SUSPENSION CABLE CABLE GRIPPER CABLE GRIPPER CANOPY MOUNTING CLIPS COMPLETED ASSEMBLY JUNCTION MOUNT (IP64 RATED) CHAIN CHAIN HOOK CANOPY 926000519 Beghelli Canada Inc., 3900 14th Avenue, Markham, ON L3R 4R3 Tel: (905) 948-9500 Fax: (905) 948-8673 3 SPADA® HO OPTIONS LINKABLE 2 Foot Model - Maximum 16 fixtures in a series 4 Foot Model - Maximum 8 fixtures in a series You may cut the length of the wire then link to the connector tightly with a screwdriver. DIMMABLE Purple 1-10V “-” Red 1-10V “+” White Neutral Black Line SAVE THESE INSTRUCTIONS! 926000519 4 Beghelli Canada Inc., 3900 14th Avenue, Markham, ON L3R 4R3 Tel: (905) 948-9500 Fax: (905) 948-8673