Preview only show first 10 pages with watermark. For full document please download

Spare Part Information

   EMBED


Share

Transcript

58300000177980_ABZ_EN_B 2/25/2014 Page 1/1 Ersatzteilinformation Sparepart information 00165254 EN Using rack slides kits instead of 00165254 end caps kit (USA) During FD 9208, rack slides and front end caps were changed to improve rack slide operation. As a result, the 00165254 end caps kit was changed to the new front end caps, which look differently than older ones. Although the newer 00165254 front end caps can fit older rack slides, it’s not feasible to use them because front end caps are held place by factory crimping dishwasher rack slides. It’s much easier to use the appropriate rack slide kit instead of the 00165254 end caps kit since the front end caps are factory assembled to the rack slides. The only assembly required is to twist the rear end caps onto the rack slides after the slides have been installed over tank wheels. Select the appropriate rack slide kit (with front / rear end caps) based on the dishwasher model: • • 00298547 – SHE / SHI / SHU / SHV / SHX dishwashers built FD 9305 and before 00669255 – Ascenta dishwashers (i.e. with plastic / ss tanks) 1 1. New front end cap 2. Old front end cap 2 NOTE: Rack slide kits contain newer front end caps and rack slides – use them instead of the 00165254 end caps kit. • • Both (left / right) sides should be replaced. Both kits include rear end caps. For authorized servicers, additional assistance is available by contacting our Technical Support team at (800) 444-9091 or by visiting our Quickfinder website at http://portal.mch.bshg.com/portal. Copyright by BSH Bosch-und Siemens Hausgeräte GmbH • Customer Service Head Office This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.