Transcript
Speaker Building
Connect great Dayton Audio power to any sub, any time
Tabletop and Plate Plate Amplifiers Amplifiers
Dayton Audio Tabletop Subwoofer Amplifiers SA230 Subwoofer Amplifier
• Low-level, high-level, and LFE inputs • Selectable bass boost • Adjustable phase, gain, and crossover • Switchable 120/240V input voltage • Manual, auto, or triggered on/off modes for integration into any automated system
Specifications: • Rated power output (1% THD): 156 watts into 8 ohms, 233 watts into 4 ohms • Input impedance: 12K ohms • Gain: 0 dB to +10 dB • Bass boost: 25 Hz to 50 Hz • Low pass adjustment: 80 Hz to 180 Hz • Dimensions: 17-1/4" W x 3-3/4" H x 13-7/8" D • Power requirements: 120/230 VAC, 50/60 Hz. #300-813 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $299.99 LIST $199.80 EACH
SA1000 Subwoofer Amplifier
• Adjustable phase, gain, crossover, and parametric EQ • Sophisticated soft clip circuitry improves headroom and protects woofers • Manual, auto, or triggered on/off for integration into any automated system • Switchable subsonic and bass boost filters • High-pass output for looping signal back into distributed audio systems • Switchable 110/220V input voltage • Removable ears for mounting in standard audio racks (2RU)
Specifications: • Rated power output: (0.92% THD) 497 watts into 8 ohms, 950 watts into 4 ohms* • Efficiency: 86% • Input impedance: 12K ohms • Subsonic
filter: -3 dB @ 18 Hz, Q=0.8 • Bass boost: +3 dB @ 25 Hz, Q=1.4 • High pass output: -3 dB @ 80 Hz, 12 dB per octave • Low pass adjustment: 30 ~ 200 Hz • Parametric EQ frequency: 18 ~ 80 Hz • Bandwidth: 0.1 ~ 1 Q • Level: -14.5 dB ~ +6 dB • Dimensions: 17-1/2" W x 4" H x 13" D (tabletop configuration) • Power requirements: 120/230 VAC, 50/60 Hz. *Based on one-third power duty cycle.
#300-811 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $549.99 LIST $398.60 EACH
Dayton Audio SPA250 Subwoofer Amplifier • Switchable 6 dB @ 35 Hz bass boost • Mono Class AB output stage for solid, well defined output • Low-level, high-level, and LFE inputs connect to any system • Manual, auto, or triggered on/off modes for compatibility with any automated system • Variable gain, crossover point and switchable phase controls optimize room integration • Switchable 120/240V input voltage • Energy efficient—draws less than 1 watt in stand-by mode
Specifications: • Measured power output: 156 watts RMS into 8 ohms @ 0.1% THD, 252 watts RMS into 4 ohms @ 0.2% THD • Dimensions: 9-13/16" W x 9-13/16" H x 5" D • Enclosure cutout: 8-1/2" x 8-1/2" • Power requirements: switchable, 110/220V, 50/60 Hz.
Bass boost switch
#300-803 �������������������������������������������������������������������������������������������������������������������������������� $199.99 LIST $124.80 EACH
Dayton Audio SA70 Subwoofer Amplifier • Excellent for computer subwoofers and tactile transducers. • Line-level and speaker-level inputs • Auto-on circuit comes on the instant the amp is needed • Variable 2nd order low-pass crossover from 60 Hz - 200 Hz • Class AB output stage
Specifications: • Measured power output:
70 watts RMS into 4 ohms @ 0.2% THD • Dimensions: 7-1/2" W x 8-11/16" H x 3-1/2" D • Enclosure cutout: 6-1/2" W x 7-3/4" H.
Dayton Audio SA100 Subwoofer Amplifier • Line-level and speaker-level inputs for connection to any system • Variable frequency 4th order low-pass crossover for a clean transition to main speakers
Specifications: • Measured power output: 75 watts RMS into 8 ohms, 100 watts RMS into 4 ohms • Dimensions: 7-1/2" W x 8-11/16" H x 4-3/4" D • Enclosure cutout: 6-1/2" W x 7-3/4" H.
#300-784 . . . . . . . . $99.99 LIST $59.60 EACH
#300-802 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.99 LIST $89.80 EACH
Dayton Audio MCA2250E 2.1 Channel Class D Amplifier
Dayton Audio SA25 Subwoofer Amplifier
• LF amp: 50 watts RMS, 4 ohms minimum • HF amp: 22 watts RMS x 2, 8 ohms minimum • Variable 12 dB/octave subwoofer crossover • Switchable +3 dB bass boost • Line level input (RCA + 3.5 mm) • Thermal, overload, and fuse protection circuitry
• Line-level and speaker-level inputs for connection to any system • Variable 2nd order low-pass crossover from 60-180 Hz • Speaker relay prevents turn-off thumps
Specifications: • Measured power
• Enclosure cutout: 4-5/8" W x 9-1/4" H.
output: 15 watts RMS into 8 ohms @ 0.1% THD, 25 watts RMS into 4 ohms @ 0.2% THD • Signal to noise ratio: 90 dB (A-weighted) • Dimensions: 6-1/4" W x 6-1/4" H x 2-1/2" D • Enclosure cutout: 5-1/4" W x 5-1/4" H.
#300-771 . . . . . . . . . . . . . $149.99 LIST $98.80 EACH
#300-782 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $59.99 LIST $35.80 EACH
Dimensions: • Overall: 5-7/8" W x 10-7/16" H x 3-3/4" D
Order Online 24 Hours a Day, 7 Days a Week at parts-express.com
145
